Determination of panaxadiol and panaxatriol in ginseng and its preparations by capillary supercritical fluid chromatography (SFC).

Capillary supercritical fluid chromatographic (SFC) method has been developed for the determination of panaxadiol and panaxatriol in ginseng and its preparations. 0.1 g ginseng or an appropriate amount of its preparations was hydrolysed by 15% H2SO4 in an ethanol:water (1:1 v/v) solution for 4 h followed by 15% NaOH for 0.5 h. The mixture was extracted by cyclohexane. The cyclohexane extracts were purified by a partition column and concentrated by an adsorption column and then analysed by SFC. Methyltestosterone was used as the internal standard.     

Peak distortion in the column liquid chromatographic determination of omeprazole dissolved in borax buffer.

Injection of a sample containing omeprazole dissolved in borax buffer (pH 9.2) into a reversed-phase liquid chromatographic system consisting of a mixture of acetonitrile and phosphate buffer (pH 7.6) as the mobile phase and a C18 surface-modified silica as the solid phase resulted under special conditions in split peaks of omeprazole. The degree of peak split and the retention time of omeprazole varied with the concentration of borax in the sample solution and the ionic strength of the mobile phase buffer as well as with the column used. Borax is eluted from the column in a broad zone starting from the void volume of the column. The retention is probably due to the presence of polyborate ions. The size of the zone varies with the concentration of borax in the sample injected. In the borax zone the pH is increased compared with the pH of the mobile phase, and when omeprazole (a weak acid) is co-eluting in the borax zone its retention is affected. In the front part and in the back part of the borax zone, pH gradients are formed, and these gradients can induce the peak splitting. When the dissolving medium is changed to a phosphate buffer or an ammonium buffer at pH 9 no peak distortion of omeprazole is observed.     

Rapid determination of PAHs in soil samples by HPLC with fluorimetric detection following sonication extraction

A rapid method for the determination of PAHs in soil samples based on their extraction with methylene chloride by sonication and subsequent separation by HPLC with fluorimetric detection is proposed. A Hypersil Green PAH column was used with a gradient of acetonitrile/water as the mobile phase, together with a program of nine excitation and emission wavelength pairs. Recoveries were in the range 70-98%, except for acenaphthene and naphthalene, at concentration levels 1.08-442 microg/kg with relative standard deviations in the range 2-15% (n = 4). Total PAHs found in soil samples were in the range 15-282 microg/kg. The results were compared with those obtained by applying the 3540 EPA method for two samples.     

A method for experimental determination of effective resonance energies related to (n, γ) reactions

When making use of some single comparator or absolute standardization methods in reactor neutron and in epicadmium neutron activation analysis, the knowledge of the effective resonance energy ( ) is essential to correct for the effect of the nonideal epithermal flux distribution on the analysis result. can be calculated from neutron resonance data, but when these are incomplete, not accurate or even not known at all, experimental determination should be considered. Such a method, providing both and the resonance integral to 2200 ms^–1 cross-section ratio (Q_O), is described in this paper. Results are given for 11 isotopes.     

Systematic calculation of detection limits in INAA of single element matrices with a SLOWPOKE reactor

A computer code using a simple model for the simulation of γ-ray spectra has been written to evaluate detection limits in INAA of single-element matrices. The data base includes cross-sections for the (n, γ), (n, p) and (n, α) reactions that contribute to the activity of samples irradiated in the inner irradiation sites of a SLOWPOKE reactor. The values of the detection limits of 63 elements in 60 matrices are presented in a tabular form. Up to 4 radioisotopes per element were considered for a total of 114 radioisotopes. The program also lists the set of experimental conditions, selected from 7 sets which cover the range of practically used values of irradiation, decay and counting time, which yields for each radioisotope the lowest limit of detection. It also indicates, via a reduction factor, the maximum allowable sample size.     

Delphinidin–Aluminum(III) Complexes in Aqueous and Non-Aqueous Media: Spectroscopic Characterization and Theoretical Study

Summary. The study of delphinidin complexation with trivalent aluminum in acidic aqueous buffered (pH 3.0 and 3.8) and methanolic solutions was performed utilizing electronic absorption spectroscopy and quantum chemical calculations. In its structure delphinidin possesses several chelating sites in competition towards aluminum(III). Molar ratio plots denoted the formation of only one aluminum(III):delphinidin complex of stoichiometry of 1:1 in both investigated media. Semiempirical calculations, performed at the restricted HF AM1 level, enabled the determination of the structural features of free delphinidin and structural modifications caused by chelation of aluminum(III). Considering the pigment molecular structure and the results of the theoretical calculations it is possible to equally implicate C3′–C4′ and C4′–C5′ hydroxyl groups as those with the predominant chelating power.     

Thermodynamic properties of aluminum monooxycarbide Al2OC

It was shown that the published data on the thermodynamic properties of aluminum monooxycarbide Al₂OC (ed) are not consistent with the phase diagram of the Al₂O₃-Al₄C₃ system. A thermodynamic modeling of the equilibrium state of the Al₂O₃-Al₄C₃ system made it possible to obtain new estimates of the standard entropy and enthalpy of formation of aluminum monooxycarbide: S°(298.15 K, cd. Al₂OC) = 45.3 J/(K mol) and Δ_f H°(298.15 K, cd, Al₂OC) = ?625.6 kJ/mol.     

Characterization of a complex dispersion of multilamellar vesicles

Spherulites ^® are multilamellar vesicles made up of surfactant bilayers. These vesicles would potentially be very useful for the encapsulation and protection of molecules; however, traditional formulations of these vesicles are poor at retaining small hydrophilic molecules (below 1000 g/mol). In this study, we present new systems of Spherulites called complex dispersions. These are prepared by dispersing Spherulites in an oil medium, and then emulsifying this oily dispersion of Spherulites within an aqueous solvent. These new systems provide an additional oil barrier between encapsulated molecules and an external aqueous phase. We have used polarized light optical microscopy, X-ray diffraction and freeze–fracture electron microscopy to study a complex dispersion of Spherulites at all stages of its preparation. We first studied the sheared lamellar phase, followed by the dispersion of the multilamellar vesicles in the oily medium and finally the emulsification of the oily dispersion within the aqueous solvent. We compared our results on lamellar phases with previous results obtained with Spherulites directly dispersible in an aqueous medium. Since the formulation of our lamellar phase included a large percentage of oil as a component, we studied the localization of the oil in the lamellar structure. We also studied the influence of osmotic pressure on complex dispersions, because complex dispersions possess a double structure similar to that of water-in-oil-in-water emulsions and multiple emulsions are known to be sensitive to osmotic pressure. In conclusion, complex dispersions proved to be new potential carriers exhibiting some unique physical properties.     

New data on the molecular compounds of stereoisomeric ditertiary glycols of the series 1,4-di-(α-hydroxy-sec-alkyl)-cyclohexanes

Summary 1¹,4¹-Dihydroxy-1¹,4¹-diethyl-1,4-dipropylcyclohexanes, like the previously described 1¹,4¹-dihydroxy-1¹,4¹-dimethyl-1,4-diethylcyclohexanes, give a molecular compound of three molecules of cis- and one molecule of trans-form.     

Conformational structure of divinyl sulfide

The potential of internal rotation about the bond for vinyl methyl sulfide is applied with some modifications to rotation about the analogous bonds in the divinyl sulfide molecule. The potential energy map of divinyl sulfide is discussed with regard to the excited torsional vibrational states. Three stable conformers with approximately identical energies were established. For a complete picture of the rotational isomerism it is also necessary to take account of the torsional vibrational stationary states with large amplitude.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1531–1535, July, 1991.