Synthesis and Characterization of 5‐Cyanotetrazolide‐Based Ionic Liquids

New salts based on imidazolium, pyrrolidinium, phosphonium, guanidinium, and ammonium cations together with the 5‐cyanotetrazolide anion [C₂N₅]^? are reported. Depending on the nature of cation–anion interactions, characterized by XRD, the ionic liquids (ILs) have a low viscosity and are liquid at room temperature or have higher melting temperatures. Thermogravimetric analysis, cyclic voltammetry, viscosimetry, and impedance spectroscopy display a thermal stability up to 230 °C, an electrochemical window of 4.5 V, a viscosity of 25 mPa s at 20 °C, and an ionic conductivity of 5.4 mS cm^?1 at 20 °C for the IL 1‐butyl‐1‐methylpyrrolidinium 5‐cyanotetrazolide [BMPyr][C₂N₅]. On the basis of these results, the synthesized compounds are promising electrolytes for lithium‐ion batteries.     

Montmorillonite KSF-Catalyzed Synthesis of 2,2′-(Arylmethylene)bis(3-hydroxy-5,5-dimethylcyclohex-2-en-1-ones) for the Functionalization of MCM-41 Silica Nanoparticles

Russian Journal of Organic Chemistry - A green protocol has been developed for the preparation of 2,2′-(arylmethylene)bis(3-hydroxy-5,5-dimethylcyclohex-2-en-1-ones) following the...     

Anisotropic Elastic-Viscoplastic Properties at Finite Strains of Injection-Moulded Low-Density Polyethylene

Injection-moulding is one of the most common manufacturing processes used for polymers. In many applications, the mechanical properties of the product is of great importance. Injection-moulding of thin-walled polymer products tends to leave the polymer structure in a state where the mechanical properties are anisotropic, due to alignment of polymer chains along the melt flow direction. The anisotropic elastic-viscoplastic properties of low-density polyethylene, that has undergone an injection-moulding process, are therefore examined in the present work. Test specimens were punched out from injection-moulded plates and tested in uniaxial tension. Three in-plane material directions were investigated. Because of the small thickness of the plates, only the in-plane properties could be determined. Tensile tests with both monotonic and cyclic loading were performed, and the local strains on the surface of the test specimens were measured using image analysis. True stress vs. true strain diagrams were constructed, and the material response was evaluated using an elastic-viscoplasticity law. The components of the anisotropic compliance matrix were determined together with the direction-specific plastic hardening parameters.     

Long-wavelength Ultraviolet A1 and Visible Light Photoprotection: A Multimodality Assessment of Dose and Response

Human skin is exposed to visible light (VL; 400–700 nm) and long-wavelength ultraviolet A1 (UVA1) radiation (370–400 nm) after the application of organic broad-spectrum sunscreens. The biologic effects of these wavelengths have been demonstrated; however, a dose–response has not been investigated. Ten subjects with Fitzpatrick skin phototype IV-VI were enrolled. Subjects were irradiated with 2 light sources (80–480 J cm⁻²): one comprising VL with less than 0.5% UVA1 (VL+UVA1) and the other pure VL. Skin responses were evaluated for 2 weeks using clinical and spectroscopic assessments. 4-mm punch biopsies were obtained from nonirradiated skin and sites irradiated with 480 J cm⁻² of VL+UVA1 and pure VL 24 h after irradiation. Clinical and spectroscopic assessments demonstrated a robust response at VL+UVA1 sites compared with pure VL. Histology findings demonstrated a statistically significant increase in the marker of inflammation (P < 0.05) and proliferation (P < 0.05) at the irradiated sites compared with nonirradiated control. Threshold doses of VL+UVA1 resulting in biologic responses were calculated. Results indicate that approximately 2 h of sun exposure, which equates to VL+UVA1 dose (~400 J cm⁻²), is capable of inducing inflammation, immediate erythema and delayed tanning. These findings reinforce the need of photoprotection beyond the UV range.