Evaluation of aerodynamic performance enhancement of Risø_B1 airfoil with an optimized cavity by PIV measurement

Journal of Visualization - Airfoils are mostly inefficient in their off-design conditions. In order to improve the aerodynamic performance of airfoils in these conditions, using an optimized cavity...     

Synthesis and optical properties of 10 mol% Ce, 5 mol% Tb co-doped KGdF4 and GdF3 submicro/nanocrystals

By controlling the pH values of prepared solutions, the 10 mol% Ce³⁺, 5 mol% Tb³⁺ co-doped KGdF₄ (synthesized with pH = 3) and the 10 mol% Ce³⁺, 5 mol% Tb³⁺ co-doped GdF₃ (synthesized with pH = 1) submicro/nanocrystals have been synthesized based on a citric acid assisted hydrothermal method. For comparison, the samples synthesized by co-precipitation method (without hydrothermal treatment) with pH = 3 and 1 were also collected. The X-ray diffraction data illustrate that the hydrothermal treated KGdF₄ sample crystallizes in the cubic phase and the GdF₃ sample crystallizes in the orthorhombic phase. However, the samples synthesized by co-precipitation method with pH = 3 and 1 are both cubic phase KGdF₄. The field emission scanning electron microscopy images suggest that the hydrothermal treated KGdF₄ submicro/nanocrystals present spherical morphology and the GdF₃ submicrocrystals are rhombic-shaped. And the photoluminescence excitation and emission spectra as well as the luminescent dynamic curves demonstrate the difference in optical properties of the two hydrothermal treated samples.     

The Smart 2-(2-Fluorobenzoyl)-N-(2-Methoxyphenyl)Hydrazinecarbothioamide Functionalized as Ni(II) Sensor in Micromolar Concentration Level and its Application in Live Cell Imaging

In recent years, fluorescent probes for the detection of environmentally and biologically important metal cations have received extensive attention for designing and development of fluorescent chemosensors. Herein, we report the photophysical results of 2-(2-fluorobenzoyl)-N-(2-methoxyphenyl) hydrazinecarbothioamide (4) functionalized as Ni (II) sensor in micromolar concentration level. Through fluorescence titration at 488 nm, we were confirmed that ligand 4 showed the remarkable emission by complexation between 4 and Ni (II) while it appeared no emission in case of the competitive ions (Cr³⁺, Fe²⁺, Co²⁺, Ba²⁺, Cu²⁺, Ca²⁺, Na⁺, K⁺, Cu⁺, Cs⁺). Furthermore, ligand 4 exhibited no toxicity with precise cell permeability toward normal living cells using L929 cell lines in bio imaging experiment investigated through confocal fluorescence microscope. The non-toxic behavior of ligand 4 (assessed by MTT assay) and its ability to track the Ni²⁺ in living cells suggest its possibility to use in biological system as nickel sensor.

Entropy production of Brownian macromolecules with inertia

We investigate the nonequilibrium steady-state thermodynamics of single Brownian macromolecules with inertia under feedback control in an isothermal ambient fluid. With the control being represented by a velocity-dependent external force, we find such an open system can have a negative entropy production rate, and we develop a mesoscopic theory consistent with the second law. We propose an equilibrium condition and define a class of external force, which includes the transverse Lorentz force, leading to equilibrium.     

Characterization of structural irregularities in highly birefringent photonic crystal fiber using torsional acoustic polarization coupling

We demonstrate a novel method to characterize structural irregularities in a highly birefringent photonic crystal fiber (HB PCF) with high accuracy based on polarization coupling by torsional acoustic wave. Birefringence variation induced by the irregularities of air-hole structure in the fiber cross-section is analyzed via the transmission spectra of the acousto-optic coupling between two orthogonal polarization modes propagating along the fiber. The estimated maximum birefringence variation of two sections in the same batch of the HB PCF is 3 × 10^− 6 and 10^− 5, respectively, from nominal birefringence value of 4.86 × 10^− 4. The comparison between the experimental results and the numerical simulation resulted in the estimation of few tens of nm variation in the air-hole structure in the PCF.     

Spectral-domain optical coherence phase microscopy for quantitative phase-contrast imaging

We describe a novel microscopy technique for quantitative phase-contrast imaging of a transparent specimen. The technique is based on depth-resolved phase information provided by common path spectral-domain optical coherence tomography and can measure minute phase variations caused by changes in refractive index and thickness inside the specimen. We demonstrate subnanometer level path-length sensitivity and present images obtained on reflection from a known phase object and human epithelial cheek cells.     

Congruential Inventory Model for Two-Echelon Distribution Systems

Large-scale inventory-distribution systems typically comprise a hierarchy of warehouses that stock goods for distribution to retailers at which demand for these goods originates. This paper develops an inventory model for two-echelon distribution systems under the assumption that the central warehouse and retailers order periodically. Characteristics of the optimal policy are described. An iterative solution procedure is presented to find optimal or near optimal operating-policy variables. Solutions of the model to a large number of test examples show that the model outperforms other existing models in the literature without sacrificing the computation time. Tested against the lower bounds on the optimal average annual variable cost obtained by removing some of the ordering costs, the solutions of the present model are found to be near optimal.     

Annealing-free Poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester-based organic solar cells

We report on the fabrication of efficient annealing-free organic solar cells using co-solvent solution considered as a promising method for low-cost and time-saving manufacturing. Higher device efficiency could be obtained compared to the pure solvent casted device, resulting from the improved crystallinity, optical absorption and transport properties. The power conversion efficiency of 2.8% was obtained, demonstrating the feasibility of achieving low-cost and high-efficiency organic solar cells without any additional treatment and processing additives.     

Transparent p‐NiO/n‐ZnO diodes used in circuit rectifiers

We report on the fabrication of a transparent photostable cell circuit composed of drive and resistor diodes which are face‐to‐face connected to each other with different device area. The diodes consisted of e‐beam evaporated p‐NiO on sputter‐deposited n‐ZnO for p/n diode formation on indium‐tin‐oxide glass. Our transparent diodes show photostable rectifying behavior, about 10³ on/off current ratio and even dynamic rectification at a maximum frequency of 100 Hz AC input signal in ambient light. The noticeable photo‐responsivity of the circuit was obtained only under ultraviolet (UV) light. We conclude that our transparent diode circuit is promising in enriching the field of transparent device electronics. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)