Classification of cultivation area of ginseng by near infrared spectroscopy and ICP-AES

A rapid and nondestructive near infrared (NIR) method using soft independent modeling of class analogy (SIMCA) for the classification of cultivation area (Korea and China) was evaluated and confirmed. Raw, first, and second derivative NIR spectra were compared to develop a robust classification rule. The chemical properties of ginseng samples were also investigated to find out the differences between Korean samples and Chinese samples. These differences make NIR spectroscopic method viable. The average value of each Korean and Chinese ginseng sample for crude fiber, crude protein, starch, and 10 inorganic constituents were measured and compared with F-test and t-test. The inorganic constituents were also measured by induced coupled plasma-atomic emission spectroscopy (ICP-AES). It could be found that the amount of starch and ten inorganic elements for example Na, Mg, P, K, Ca, Mn, Fe, Ni, Cu and Zn in ginseng samples are considerably different based on cultivation area. SIMCA has been applied to the inorganic data to investigate the possibility of ICP-AES as classification tool. However, it was observed that the result was not equal to than NIR spectra data. The overall results showed the availability of NIR method using SIMCA would be adequate for classification of cultivation of ginseng, since NIR spectra includes useful and various information on chemical properties in spite of broad and overlapped bands.     

A new route to spirooxindoles

[reaction: see text]Reaction of indole amides 5 with tributylstannane gave spiroindolenines 9 which are readily converted into spiropyrrolidinyloxindoles. This tricyclic system is found in a number of interesting natural products.     

Catalytic carbonylation for the synthesis of chemical intermediates

Chemistry related to three catalytic carbonylation reactions is discussed. Synthesis of diphenylurea from nitrobenzene, aniline, and CO gives isolated yields above 98% at 100–120 °C and 15–60 bar of CO in the presence of a palladium (II) complex, PPh₃ and NEt₄Cl. Experimental evidence was provided to prove a new reaction stoichiometry and involvement of a carbamoyl intermediate. In carbonylation of HCHO over ion exchange resin catalysts, reaction temperature, time, pressure, and solvent were important variables to obtain high yields of methyl glycolate. Carbonylation of isobutylphenylethanol at 120°C and 40 bar of CO in the presence of PdCl₂−PPh₃−HCl gives 98% yield of α-(4-isobutylphenyl) propionic acid (ibuprofen). Each catalyst component had a definite role that is indispensable for an efficient overall reaction.     

Optical sensors based on hybrid DNA/conjugated polymer complexes

Single-stranded DNA (ss-DNA) can specifically bind to various targets, including a complementary ss-DNA, ions, proteins, drugs, and so forth. When binding takes place, the oligonucleotide probe often undergoes a conformational transition. This conformational change of the negatively charged ss-DNA can be detected by using a water-soluble, cationic polythiophene derivative, which transduces the complex formation into an optical (colorimetric or fluorometric) signal without any labeling of the probe or the target. This simple and rapid methodology has enabled the specific and sensitive detection of nucleic acids and human thrombin. This new biophotonic tool can easily be applied to the detection of various other biomolecules and is also useful in the high-throughput screening of new drugs.     

Substituted γ-lactones: On the structural elucidation of the reaction products from 4-aroyl-3-hydroxy-2(5H)-furanones and 1,2-diamines

The reaction pathway of 4-aroyl-3-hydroxy-2(5H)-furanones 1 with diamines depends on the nature of the amine as well as on the applied reaction conditions. Thus, the reaction of 1a-d with 5,6-diamino-1,3-dimethyluracil 5 led to the formation of two isomeric Schiff bases 7a-d and 8a-d . Conversely type 1 compounds reacted with 4,5-diaminopyrimidine 9 or 2,3-diaminopyridine 10 to form the mono acid-base adducts 11a and 11b respectively. When type 1 compounds were reacted with aliphatic diamines 13a-d or p-phenylenediamine and p-xylenediamine, respectively also an immediate formation of acid-base adducts 15a-f was observed. The reaction of a number of O-methylated type 1 compounds with 1,2-ethylenediamine afforded the novel seven-membered ring compounds 18a-d in good yields. The analogous reaction of O-alkylated 1a with o-phenylenediamine 2 or 2,3-diaminonaphthalene gave the expected tricyclic ring systems 19 or 20 .     

Analysis of transient membrane protein interactions by single-molecule diffusional mobility shift assay

Various repertoires of membrane protein interactions determine cellular responses to diverse environments around cells dynamically in space and time. Current assays, however, have limitations in unraveling these interactions in the physiological states in a living cell due to the lack of capability to probe the transient nature of these interactions on the crowded membrane. Here, we present a simple and robust assay that enables the investigation of transient protein interactions in living cells by using the single-molecule diffusional mobility shift assay (smDIMSA). Utilizing smDIMSA, we uncovered the interaction profile of EGFR with various membrane proteins and demonstrated the promiscuity of these interactions depending on the cancer cell line. The transient interaction profile obtained by smDIMSA will provide critical information to comprehend the crosstalk among various receptors on the plasma membrane.Subject terms: Fluorescence imaging, Super-resolution microscopy, Single-molecule biophysics     

Photoactivation of pheophorbide a induces a mitochondrial-mediated apoptosis in Jurkat leukaemia cells

The mechanism of cell death by pheophorbide a (Pba) which has been established to be a potential photosensitizer was examined in experimental photodynamic therapy (PDT) on Jurkat cells, a human lymphoid tumor cell line. In 30-60 min after irradiation, Pba treated cells exhibited apoptotic features including membrane blebbing and DNA fragmentation. Pba/PDT caused a rapid release of cytochrome c from mitochondria into the cytosol. Sequentially, activation of caspase-3 and the cleavage of poly ADP-ribose polymerase (PARP) were followed. Meanwhile, no evidence of activation of caspase-8 was indicated in the cells. In experiments with caspase inhibitors, it was found that caspase-3 alone was sufficient initiator for the Pba-induced apoptosis of the cells. Pba specific emission spectra were confirmed in the mitochondrial fraction and the light irradiation caused a rapid change in its membrane potential. Thus, mitochondria were entailed as the crucial targets for Pba as well as a responsible component for the cytochrome c release to initiate apoptotic pathways. Taken together, it was concluded that the mode of Jurkat cell death by Pba/PDT is an apoptosis, which is initiated by mitochondrial cytochrome c release and caspase-3-pathways.     

A polymeric photobase generator containing oxime–urethane groups: Crosslinking reaction and application to negative photoresist

A polymeric photobase generator containing oxime–urethane groups was prepared by copolymerization of methyl methacrylate and methacryloxyethyl benzophenoneoxime urethane, and its photo and thermal crosslinking reaction after irradiation was examined from the measurement of UV and IR absorption spectral changes, insoluble fraction, and molecular weight changes. The photo‐crosslinking reaction of the copolymer film was more efficient when irradiations were carried out with 310 nm UV light in the presence of benzophenone than with 254 nm UV light without the addition of benzophenone. The crosslinking reaction increased after postexposure baking (PEB), and this thermal crosslinking reaction mechanism was studied from the identification of the photolysis products of a model compound, benzophenoneoxime phenylurethane, by a high‐performance liquid chromatography. The results indicate that the thermal crosslinking reaction of the copolymer after PEB is due to the formation of urea‐type chemical bonds. Resist properties of the copolymer were examined from the measurement of normalized thickness and micropattern development. A negative tone image with a resolution of 2 μm was obtained with this copolymer, having a sensitivity (D) of 1200 mJ/cm² and contrast (γ_n) of 1.31, when irradiation was carried out with 310 nm UV light in the presence of benzophenone following chloroform development. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 975–984, 2004     

Neutron diffraction study of [H(4)Co(4)(C(5)Me(4)Et)(4)], a tetrahedral metal cluster complex with four face-bridging hydride ligands

A single-crystal neutron diffraction analysis of the cluster complex [H(4)Co(4)(C(5)Me(4)Et)(4)] was carried out on the new quasi-Laue diffractometer VIVALDI at the Institut Laue-Langevin. The structure consists of four face-bridging hydrides attached to a tetrahedral cobalt metal core. Average distances and angles in the core of the molecule are as follows: Co-Co = 2.571(8), Co-C = 2.158(6), Co-H = 1.749(7), H.H = 2.366(9) A; Co-H-Co = 94.6(3), H-Co-H = 85.1(3) degrees. The hydride ligands are located off the Co-Co-Co planes by an average distance of 0.923(8) A. It is suggested that the dimensions of the HCo(3) fragments found in this molecule provide reasonable estimates for analogous distances and angles associated with chemisorbed H atoms situated on the 3-fold hollows of a cobalt surface. Crystallographic details: space group P2(1)/a (monoclinic); a = 21.979(2), b = 10.924(1), c = 34.406(2) A; beta = 90.81(1) degrees; Z = 8. Final agreement factor: R(F) = 0.099 for 3779 reflections [I > 2sigma(I)] collected at 20 K.     

Preparation and characterization of functional group gradient surfaces

Functional group gradient surfaces where the density of functional groups changes gradually along the sample length were prepared. The functional group (? COOH, ? CONH₂, and ? OH group) gradient surfaces were produced by the treatment of low-density PE sheets using a corona with gradually increasing power, followed by the graft copolymerization of acrylic acid and subsequent substitution reaction of carboxylic acid groups to amide or hydroxyl groups. The prepared gradient surfaces were characterized by the measurement of water contact angle, FTIR-ATR, and ESCA. The gradient surfaces prepared can be used to systematically investigate the interactions of biological or other species in terms of the surface functional groups and their density of polymeric materials. © 1994 John Wiley & Sons, Inc.