Synthesis and adsorption properties of gold nanoparticles within pores of surface‐functional porous polymer microspheres

Mesoporous polymer microspheres with gold (Au) nanoparticles inside their pores were prepared considering their surface functionality and porosity. The Au/polymer composite microspheres prepared were characterized by transmission electron microscope (TEM), X‐ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) techniques. The results showed that the adsorption of Au nanoparticles could be increased by imparting the pore structure and surface‐functional groups into the supporting polymer microspheres (in this study, poly (ethylene glycol dimethacrylate‐co‐acrylonitrile) and poly (EGDMA‐co‐AN) system). Above all, from this study, it was established that the porosity of the polymer microspheres is the most important factor that determines the distribution and adsorption amount of face‐centered cubic (fcc) Au nanoparticles in the final products. Our study showed that the continuous adsorption of Au nanoparticles with the aid of the large surface area and surface interaction sites formed more favorably the Au/polymer composite microspheres. The BET measurements of Au/poly(EGDMA‐co‐AN) composite microspheres reveals that the adsorption of Au nanoparticles into the pores kept the pore structure intact and made it more porous. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5627–5635, 2004     

Preparation of antimicrobial poly(vinyl alcohol) nanofibers containing silver nanoparticles

Polyvinyl alcohol (PVA) nanofibers containing Ag nanoparticles were prepared by electrospinning PVA/silver nitrate (AgNO₃) aqueous solutions, followed by short heat treatment, and their antimicrobial activity was investigated for wound dressing applications. Since PVA is a water soluble and biocompatible polymer, it is one of the best materials for the preparation of wound dressing nanofibers. After heat treatment at 155 °C for 3 min, the PVA/AgNO₃ nanofibers became insoluble, while the Ag⁺ ions therein were reduced so as to produce a large number of Ag nanoparticles situated preferentially on their surface. The residual Ag⁺ ions were reduced by subsequent UV irradiation for 3 h. The average diameter of the Ag nanoparticles after the heat treatment was 5.9 nm and this value increased slightly to 6.3 nm after UV irradiation. It was found that most of the Ag⁺ ions were reduced by the simple heat treatment. The PVA nanofibers containing Ag nanoparticles showed very strong antimicrobial activity. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2468–2474, 2006     

Structural and electrical properties of core–shell structured GaP nanowires with outer Ga2O3 oxide layers

This paper presents a review of our current experimental research on GaP nanowires grown by a vapor deposition method. Their structural, electrical, opto-electric transport, and gas-adsorption properties are reviewed. Our structural studies showed that a GaP nanowire consisted of a core–shell structure with a single-crystalline GaP core and an outer Ga₂O₃ layer. The individual GaP nanowires exhibited n-type field effects. Their electron mobilities were in the range of about 6 to 22 cm²/V s at room temperature. When the nanowires were illuminated with an ultraviolet light source, an abrupt increase of conductance occurred resulting from carrier generation in the nanowire and de-adsorption of adsorbed OH^- or O₂ ^- ions on the Ga₂O₃ surface shell. Using an intrinsic Ga₂O₃ shell layer as a gate dielectric, top-gated GaP nanowire field-effect transistors were fabricated and characterized. Like other metal oxide nanowires, the carrier concentration and mobility of GaP nanowires were significantly affected by the surface molecular adsorption of OH or O₂. The GaP nanowire devices were fabricated as sensors for NO₂, NH₃, and H₂ gases by using a simple metal decoration technique. PACS 73.63.-b; 72.80.Ey; 85.35.-p     

Preparation of the conjugated polyene chains with the 1,4-dimethyl substitution

Allylic sulfones undergo the conjugate addition to diethyl chloroisopropylidenemalonate, followed by intramolecular cyclopropanation. DBU-promoted ring opening and subsequent desulfonation reactions of the resulting adduct produce the conjugated polyene chains with the 1,4-dimethyl substitution.     

Correlation between Al2O3 particles and interface of Al-Al2O3 coatings by cold spray

Al-Al₂O₃ composite coatings with different Al₂O₃ particle shapes were prepared on Si and Al substrate by cold spray. The powder compositions of metal (Al) and ceramic (Al₂O₃) having different sizes and agglomerations were varied into ratios of 10:1 wt% and 1:1 wt%. Al₂O₃ particles were successfully incorporated into the soft metal matrix of Al. It was found that crater formation between the coatings and substrate, which is typical characteristic signature of cold spray could be affected by initial starting Al₂O₃ particles. In addition, when the large hard particles of fused Al₂O₃ were employed, the deep and big craters were generated at the interface between coatings and hard substrates. In the case of pure soft metal coating such as Al on hard substrate, it is very hard to get proper adhesion due to lack of crater formation. Therefore, the composite coating would have certain advantages.     

The basis set superposition error in multilevel methods: a test on the H2O and HF dimer

The basis set superposition error (BSSE) is often very important in the accurate calculation of dimerization energies. Accurate prediction of thermochemical properties requires appropriate consideration of the basis set incompleteness error. Multilevel methods introduce adjustable parameters to reproduce experimental data, that is, the higher level correction (HLC) in G3 and adjustable coefficients in the MCCM. However, the HLC term is cancelled out and the adjustable coefficients in the MCCM do not remove the BSSE completely. We have calculated the BSSE involved in the multilevel methods. The H₂O and HF dimer systems were used as a test case. This study shows that empirical coefficients do reduce the BSSE in some cases and an MCCM with good parameters can be used to reproduce dimerization energies within chemical accuracy without the BSSE correction.     

SMSI effect on ceria supported Cu-Pd catalysts in the hydrogenation of 1,3-butadiene

Ceria-supported copper-palladium catalysts have been tested in the hydrogenation of 1,3-butadiene. The SMSI behavior of the bimetallic catalysts depended on the temperature of reduction. They were analyzed by H₂ chemisorption and XPS.