Preparation and characterization of cotton fabrics with antibacterial properties treated by crosslinkable benzophenone derivative in choline chloride-based deep eutectic solvents

Cotton fabrics with antibacterial properties were prepared by the treatment with 3,3′4,4′-benzophenone tetracarboxylic dianhydride (BPTCD) in a combined process of shaking immersion in dyeing machine and pad-dry-cure. Environmentally-benign choline chloride (ChCl)-based deep eutectic solvents (DESs) were mainly examined as treatment media instead of using organic solvent. The results revealed that cotton fabrics treated with BPTCD in urea-ChCl DES showed a strong ester carbonyl peak in fourier transform infrared (FTIR) analysis, indicating fixation of BPTCD on cotton cellulose. Detailed characterizations of the BPTCD-treated cotton were carried out by FTIR, thermogravimetric analysis, scanning electron microscopy, dye staining, and evaluation of hydrophilicity and strength. The treated fabrics demonstrated a high level of antibacterial characteristics before and after UV irradiation. This indicated that addition of ChCl could enhance antibacterial activity of cotton before UV irradiation. Therefore, use of ChCl-based DES along with BPTCD incorporation provided environmentally-acceptable and economically-feasible treatment process for preparation of novel antibacterial cotton.     

Nucleophile‐Dependent Regio‐ and Stereoselective Ring Opening of 1‐Azoniabicyclo[3.1.0]hexane Tosylate

1‐[(1R)‐(1‐Phenylethyl)]‐1‐azoniabicyclo[3.1.0]hexane tosylate was generated as a stable bicyclic aziridinium salt from the corresponding 2‐(3‐hydroxypropyl)aziridine upon reaction with p‐toluenesulfonyl anhydride. This bicyclic aziridinium ion was then treated with various nucleophiles including halides, azide, acetate, and cyanide in CH₃CN to afford either piperidines or pyrrolidines through regio‐ and stereoselective ring opening, mediated by the characteristics of the applied nucleophile. On the basis of DFT calculations, ring‐opening reactions under thermodynamic control yield piperidines, whereas reactions under kinetic control can yield both piperidines and pyrrolidines depending on the activation energies for both pathways.     

Review on the thickness measurement of ultrathin oxide films by mutual calibration method

Mutual calibration was suggested as a method to determine the absolute thickness of ultrathin oxide films. It was motivated from the large offset values in the reported thicknesses in the Consultative Committee for Amount of Substance (CCQM) pilot study P-38 for the thickness measurement of SiO₂ films on Si(100) and Si(111) substrates in 2004. Large offset values from 0.5 to 1.0 nm were reported in the thicknesses by ellipsometry, X-ray reflectometry (XRR), medium-energy ion scattering spectrometry (MEIS), Rutherford backscattering spectroscopy (RBS), nuclear reaction analysis (NRA), and transmission electron microscopy (TEM). However, the offset value for the thicknesses by X-ray photoelectron spectroscopy (XPS) was close to zero (−0.013 nm). From these results, the mutual calibration method was reported for the thickness measurement of SiO₂ films on Si(100) by combination of TEM and XPS. The mutual calibration method has been applied for the thickness measurements of hetero oxide films such as Al₂O₃ and HfO₂. Recently, the effect of surface contamination was reported to be critical to the thickness measurement of HfO₂ films by XPS. On the other hand, MEIS was proved to be a powerful zero offset method which is not affected by the surface contamination. As a result, the reference thicknesses in the CCQM pilot study P-190 for the thickness measurement of HfO₂ films on Si(100) substrate were determined by mutual calibration method from the average XRR data and MEIS analysis. Conclusively, the thicknesses of ultrathin oxide films can be traceably certified by mutual calibration method and most thickness measurement methods can be calibrated from the certified thicknesses.     

Single-drop microextraction technique for the determination of antibiotics in environmental water

Growing concerns related to antibiotic residues in environmental water have encouraged the development of rapid, sensitive, and accurate analytical methods. Single-drop microextraction has been recognized as an efficient approach for the isolation and preconcentration of several analytes from a complex sample matrix. Thus, single-drop microextraction techniques are cost-effective and less harmful to the environment, subscribing to green analytical chemistry principles. Herein, an overview and the current advances in single-drop microextraction for the determination of antibiotics in environmental water are presented were included. In particular, two main approaches used to perform single-drop microextraction (direct immersion-single-drop microextraction and headspace-single-drop microextraction) are reviewed. Furthermore, the impressive analytical features and future perspectives of single-drop microextraction are discussed in this review.     

Evaluation of aerodynamic performance enhancement of Risø_B1 airfoil with an optimized cavity by PIV measurement

Journal of Visualization - Airfoils are mostly inefficient in their off-design conditions. In order to improve the aerodynamic performance of airfoils in these conditions, using an optimized cavity...     

Macrocycles with two exclusive hydrogen-bonding modes

A series of large, 44-membered macrocycles 7a-e were synthesized and characterized, which display two different diagonal binding modes. The unsubstituted macrocycle 7a strongly binds naphthalene-2,6-dicarboxylate through hydrogen bonds with the association constant (K_a ± 15%) of 4500 M⁻¹ in 40% (v/v) CD₃CN/CDCl₃ at 23 ± 1 °C. Introduction of an electron-withdrawing substituent (Cl) at all four corners increases the binding affinity (22,000 M⁻¹ for 7b), while that of an electron-donating substituent (pyrrolidinyl) greatly decreases it (150 M⁻¹ for 7c). The same propensity has been observed with macrocycles 7d and 7e bearing different substituents at two diagonal corners, suggesting that the relative population of the binding modes would be modulated by controlling the electron density of the aromatic ring.     

Liquid‐crystalline organic–inorganic hybrid polymers with functionalized silsesquioxanes

Liquid‐crystalline (LC) hybrid polymers with functionalized silsesquioxanes with various proportions of LC monomer were synthesized by the reaction of polyhedral oligomeric silsesquioxane (POSS) macromonomer with methacrylate monomer having an LC moiety under common free‐radical conditions. The obtained LC hybrid polymers were soluble in common solvents such as tetrahydrofuran, toluene, and chloroform, and their structures were characterized with Fourier transform infrared, ¹H NMR, and ²⁹Si NMR. The thermal stability of the hybrid polymers was increased with an increasing ratio of POSS moieties as the inorganic part. Because of the steric hindrance caused by the bulkiness of the POSS macromonomer, the number‐average molecular weight of the hybrid polymers gradually decreased as the molar percentage of POSS in the feed increased. Their liquid crystallinities were very dependent on the POSS segments of the hybrid polymers behaving as hard, compact components. The hybrid polymer with 90 mol % LC moiety (Cube‐LC90) showed liquid crystallinity, larger glass‐transition temperatures, and better stability with respect to the LC homopolymer. The results of differential scanning calorimetry and optical polarizing microscopy showed that Cube‐LC90 had a smectic‐mesophase‐like fine‐grained texture. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4035–4043, 2001     

Simultaneous determination of levofloxacin and ciprofloxacin in human urine by ionic‐liquid‐based,dual‐template molecularly imprinted coated graphene oxide monolithic solid‐phase extraction

A novel method was developed to simultaneously determine the ciprofloxacin and levofloxacin levels in human urine using an ionic‐liquid‐based, dual‐molecularly imprinted polymer‐coated graphene oxide solid‐phase extraction monolithic column coupled with high‐performance liquid chromatography. The molecularly imprinted monolithic column was prepared using ciprofloxacin and levofloxacin as templates, 1‐vinyl‐3‐ethylimidazolium bromide as the functional monomer, and graphene oxide as the core material. The resulting imprinted monoliths were characterized by scanning electron microscopy and fourier transform‐infrared spectroscopy. The efficiency and capacity of the ionic‐liquid‐based imprinted monolithic column were investigated by varying the synthesis conditions (ciprofloxacin/levofloxacin ratio and template/functional monomer/cross‐linker ratio). The solid‐phase extraction process was optimized by changing the washing and eluting conditions. The results suggested that the proposed ionic‐liquid‐based molecularly imprinted solid‐phase extraction monolithic‐high‐performance liquid chromatography method could separate ciprofloxacin and levofloxacin efficiently and simultaneously from human urine. The mean recoveries of ciprofloxacin and levofloxacin ranged from 89.2 to 93.8 and 86.7 to 94.6%, respectively. The intra‐ and interday relative standard deviation ranged from 0.9 to 3.2 and 0.8 to 2.9%, respectively. Under the optimized conditions, the recoveries of ciprofloxacin and levofloxacin were more than 93.8%.     

A study of design velocity field computation for shape optimal design

Design velocity field computation is an important step in computing shape design sensitivity coefficients and updating a finite element mesh in the shape design optimization process. Applying an inappropriate design velocity field for shape design sensitivity analysis and optimization will yield inaccurate sensitivity results or a distorted finite element mesh, and thus fail in achieving an optimal solution. In this paper, theoretical regularity and practical requirements of the design velocity field are discussed. The crucial step of using the design velocity field to update the finite element mesh in the design optimization process is emphasized. Available design velocity field computation methods in the literature are summarized and their applicability for shape design sensitivity analysis and optimization is discussed. Five examples are employed to discuss applicability of these methods. It was found that a combination of isoparametric mapping and boundary displacement methods is ideal for the design velocity field computation.