Syntheses and characterization of carbazole based new low‐band gap copolymers containing highly soluble benzimidazole derivatives for solar cell application

Newly designed 2H‐benzimidazole derivatives which have solubility groups at 2‐position have been synthesized and incorporated into two highly soluble carbazole based alternating copolymers, poly[2,7‐(9‐(1′‐octylnonyl)‐9H‐carbazole)‐alt‐5,5‐(4′,7′‐di(thien‐2‐yl)‐2H‐benzimidazole‐2′‐spirocyclohexane)] (PCDTCHBI) and poly[2,7‐(9‐(1′‐octylnonyl)‐9H‐carbazole)‐alt‐5,5‐(4′,7′‐di(thien‐2‐yl)‐2H‐benzimidazole‐2′‐spiro‐4′′‐((2′′′‐ethylhexyl)oxy)‐cyclohexane)] (PCDTEHOCHBI) for photovoltaic application. These alternating copolymers show low‐band gap properties caused by internal charge transfer from an electron‐rich unit to an electron‐deficient moiety. HOMO and LUMO levels are –5.53 and –3.86 eV for PCDTCHBI, and –5.49 and –3.84 eV for PCDTEHOCHBI, respectively. Optical band gaps of PCDTCHBI and PCDTEHOCHBI are 1.67 and 1.65 eV, respectively. The new carbazole based the 2H‐benzimidazole polymers show 0.11–0.13 eV lower values of band gaps as compared to that of carbazole based benzothiadiazole polymer, poly[N‐9′‐heptadecanyl‐2,7‐carbazole‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] (PCDTBT), while keeping nearly the same deep HOMO levels. The power conversion efficiencies of PCDTCHBI and PCDTEHOCHBI blended with [6,6]phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) are 1.03 and 1.15%, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Multiresidue analysis of pesticides with hydrolyzable functionality in cooked vegetables by liquid chromatography tandem mass spectrometry

It would be preferable for pesticide residues substituted by hydrolyzable functionality to be analyzed after cooking because their structures are apt to degrade during boiling and/or heating. A liquid chromatography–tandem mass spectrometry (LC‐MS/MS) method for the quantitative determination of 44 pesticide residues with hydrolyzable functional group in five typical vegetable widely consumed in Republic of Korea is described. The sample clean‐up was carried out according to the method of Food Code No. 83 established by the Korea Food and Drug Administration (KFDA). Zorbox XDB‐C₁₈ column was selected for the analysis because of the best peak separation. The LC mobile phase consisted of water and 5 mm methanolic ammonium formate, which resulted in a peak shape with good symmetry at each run. Tandem mass spectroscopic (MS/MS) experiments were performed in ESI positive mode and the multiple reaction monitoring modes. A conventional matrix effect was modified to more comprehensive form 100γ_ij (%). A high matrix effect (相似文献   

Effects of surfactant and molecular weight of polyol on grating formation and switching of holographic PDLC

The interposition of surfactants between polymer and liquid crystal (LC) droplets was theoretically predicted by the positive spreading coefficient (0 < λ₃₁) and utilized to interpret the morphology, grating formation kinetics, diffraction efficiency, and switching of the holographic polymer dispersed liquid crystal (HPDLC), prepared from various types (octanoic acid, poly oxyethylene octyl phenyl ether, and perfluoro‐1‐butanesulfonyl fluoride) and amounts (0–9 wt%) of surfactant and molecular weights of polyol (PPG). Regardless of the surfactant type, diffraction efficiency increased with the addition and increasing amount of surfactant, a tendency consistent with increasing value of spreading coefficient, which is determined by the formulations of grating formation. In contrast, diffraction efficiency showed a maximum with the polypropylene glycol (PPG) molecular weight. Surfactant effectively reduced the anchoring energy and electrically drove the film which otherwise was not driven. Overall, surfactant with greater λ₃₁ gave smaller droplet, greater diffraction efficiency, driving voltage, contrast ratio, and smaller response time. Copyright © 2008 John Wiley & Sons, Ltd.     

Dynamic DSC Characterization of Epoxy Resin by Means of the Avrami Equation

A phenomenological approach was used to characterize the cure processes of epoxy resins (a diglycidyl ether of bisphenol A and its modifier CTBN) from dynamic experiments by DSC. Various kinetic parameters were obtained by using a modified Avrami expression. The resulting overall activation energies for the two systems agreed very well with the published data in the whole cure temperature range. In contrast with the isothermal results and the general dynamic models, a change in the exponent and the non-linear temperature dependence of the rate constant were also observed.This revised version was published online in November 2005 with corrections to the Cover Date.     

BIOLUMINESCENCE OF ACETALDEHYDE CATALYZED BY BACTERIAL LUCIFERASE

Abstract— Bioluminescence from the oxidation of acetaldehyde by bacterial luciferase of Photobacterium fischeri has been demonstrated for the first time and its efficiency has been compared with that of nonanal and other short chain aldehydes.     

Field‐effect transistors based on PPV derivatives as a semiconducting layer

A series of modified thiophene groups containing PPV‐based semiconducting materials, poly[(2,5‐bis(octyloxy)‐1,4‐phenylenevinylene)‐alt‐(2,2′bithienylenevinylene)] ( PPBT ), poly[(2,5‐bis(octyloxy)‐1,4‐phenylenevinylene)‐alt‐(5,5‐thiostilylenevinylene)] ( PPTVT ), have been synthesized through a Horner coupling reaction. From the FTIR and ¹H NMR spectroscopy, the configuration of the vinylene groups in the polymers was all trans (E) geometry. The weight‐average molecular weights (M_w) of PPBT and PPTVT were found to be 11,700 and 11,800, with polydispersity indices of 2.51 and 2.53, respectively. PPBT and PPTVT thin films exhibit UV–visible absorption maxima at 538 and 558 nm, respectively, and the strong absorption shoulder peaks at 578 and 602 nm, respectively. Solution processed field‐effect transistors (FET) fabricated using all the polymers showed p‐type OTFT characteristics. The field‐effect mobility of the PPTVT was obtained up to 2.3 × 10^?3 cm² V^?1 s^?1, an on/off ratio of 1.0 × 10⁵ with ambient air stability. Studies of the atomic force microscopy (AFM) and X‐ray diffraction (XRD) analysis of the polymer thin films revealed that all the polymers were amorphous structure. The greater planarity and rigidity of PPTVT compared to PPBT results in elongation of conjugation length and better π–π stacking of polymer chains in amorphous region, which leads to improved FET performance. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 111–120, 2009     

HPLC determination of irbesartan in human plasma: its application to pharmacokinetic studies

A simple and rapid HPLC method using fluorescence detection was developed for determination of irbesartan in human plasma. Sample preparation was accomplished through a simple deproteinization procedure with 0.4 mL of acetonitrile containing 800 ng/mL of losartan (internal standard), and to a 0.1 mL plasma sample. Chromatographic separation was performed on a Zorbax Xclipse XDB C₁₈ column (150 × 4.6 mm, i.d., 5 µm) at 40°C. An isocratic mobile phase, acetonitrile:0.1% formic acid (37:63, v/v), was run at a flow‐rate of 1.0 mL/min, and the column eluent was monitored using a fluorescence detector set at excitation and emission wavelengths of 250 and 370 nm, respectively. The retention times of irbesartan and losartan were 4.4 and 5.9 min, respectively. This assay was linear over a concentration range of 10–5000 ng/mL with a lower limit of quantification of 10 ng/mL. The coefficient of variation for this assay precision was less than 8.48%, and the accuracy exceeded 94.4%. The mean relative recoveries of irbesartan and losartan were 98.4 and 99.1%, respectively. This method was successfully applied for pharmacokinetic study after oral administration of irbesartan (300 mg) to 23 Korean healthy male volunteers. Copyright © 2009 John Wiley & Sons, Ltd.     

Blue luminescence of nanocrystalline PbWO4 phosphor synthesized via a citrate complex route assisted by microwave irradiation

Nanocrystalline PbWO₄ phosphor powders, which have scheelite structure, were successfully synthesized at low temperatures via a modified citrate complex route assisted by microwave irradiation. Crystallization of the PbWO₄ precursor were detected at 400 °C, and entirely completed at 500 °C. Prepared PbWO₄ nanocrystallites showed primarily spherical and disperse morphology. The average crystallite sizes were between 18 and 29 nm, showing an ordinary tendency to increase with temperature. The nanocrytalline PbWO₄ phosphor powders exhibited spread-eagle shape of blue luminescence. Especially the PbWO₄ phosphor powders prepared at 600 °C showed the strongest luminescent intensity, which was due to the higher crystallinity and homogeneous particle morphology.     

Improved Performance of an Amperometric Biosensor with Polydiaminonaphthalene on Electrochemically Deposited Au Nanoparticles

The performance of an enzyme sensor fabricated through covalent bond formation on the HRP‐bonded poly(1,8‐diaminonaphthalene) (polyDAN) layer with gold nanoparticles (AuNPs) was applied to catalyze the electrochemical reduction of H₂O₂. The surface characteristics of the sensor probe were studied using cyclic voltammetry, SEM, XPS, QCM, and impedance spectroscopy. The AuNP‐deposited surface resulted in higher conductivity and sensitivity for H₂O₂ detection in phosphate buffer solution. A linear calibration plot was obtained in the H₂O₂ concentration range between 10.0 μM and 25.0 mM with detection limit 5.0±1.25 μM. The lifetime of HRP/polyDAN/AuNP/GC probe was over 70 days without response loss.