Determination of gastrodin and vanillyl alcohol in Gastrodia elata Blume by pressurized liquid extraction at room temperature

Pressurized liquid extraction (PLE) at room temperature with a laboratory-assembled system was applied for the extraction of gastrodin (GA) and vanillyl alcohol (VA) in Gastrodia elata Blume. The proposed system setup for this current work was simpler as no heating and backpressure regulator was required. Extraction with PLE was carried out dynamically at a flow rate of 1.5 mL/min, at room temperature, under an applied pressure of 10-20 bars with an extraction time of 40-50 min. The extraction efficiencies of the proposed method using 20% aqueous ethanol were compared with heating under reflux using organic solvents such as methanol and ethanol/water (20:80) for different batches of medicinal plant materials. For the determination of GA and VA in G. elata Blume, the extraction efficiencies of PLE at room temperature were observed to be comparable with heating under reflux. The method precision was found to vary from 1.6 to 8.6% (RSD, n = 6) on different days. The marker compounds present in the various medicinal plant extracts were determined by gradient elution HPLC and HPLC/MS/MS. Our work demonstrated the possibility of implementation of PLE at room temperature and the advantages of minimizing the use of organic solvents in the extraction process.     

Determination of indican, isatin, indirubin and indigotin in Isatis indigotica by liquid chromatography/electrospray ionization tandem mass spectrometry

The roots and leaves of Isatis indigotica, named 'Ban-Lan-Gen' and 'Da-Qing-Ye', respectively, are widely used for the treatment of influenza, viral pneumonia, mumps, pharyngitis, and hepatitis. The indoxyl derivatives detected in the roots and leaves of I. indigotica have been reported to be biologically active. In the present study, a liquid chromatography/electrospray ionization tandem mass spectrometry (LC/ESI-MS/MS) method was developed to determine indican, isatin, indirubin and indigotin in the roots and leaves of I. indigotica. The method has been validated for linearity, precision and accuracy. Using multiple reaction monitoring (MRM), the limits of detection (LODs) were determined as 0.004 ng for indican, 0.01 ng for isatin, 0.01 ng for indrubin and 0.03 ng for indigotin, while the limits of quantitation (LOQs) were 0.015 ng for indican, 0.04 ng for isatin, 0.04 ng for indirubin and 0.1 ng for indigotin. Compared with previously reported methods, the current method is more rapid, selective and sensitive. This is the first report of the LC/MS/MS determination of indican, isatin, indirubin and indigotin.     

Intermolecular contact-tuned magnetic nature in one-dimensional 3d-5d bimetallic systems: from a metamagnet to a single-chain magnet

Assembling [W(CN) 6(bpy)] (-) and magnetic anisotropic Mn Schiff bases produced two Mn (III)(3d)-W (V)(5d) bimetallic chains. Modulation of the types and degrees of interchain pi-pi interactions in the one-dimensional coordination polymers leads to the variation of the magnetic behavior from a metamagnetic character to a single-chain magnet property.     

Cooperative melting in caged dimers of rigid small molecule-DNA hybrids

Rigid small-molecule DNA hybrids (rSMDHs) have been synthesized with three DNA strands attached to a rigid tris(phenylacetylene) core. When combined under dilute conditions, complementary rSMDHs form cage dimers that melt at >10 degrees C higher and much sharper than either unmodified DNA duplexes or rSMDH aggregates formed at higher concentrations. With a 2.97 average number of cooperative duplexes, these caged dimers constitute the first example of cooperative melting in well-defined DNA-small-molecule structures, demonstrating the important roles that local geometry and ion concentration play in the hybridization/dehybridization of DNA-based materials.     

Chemical-clathrate hybrid hydrogen storage: storage in both guest and host

Hydrogen storage from two independent sources of the same material represents a novel approach to the hydrogen storage problem, yielding storage capacities greater than either of the individual constituents. Here we report a novel hydrogen storage scheme in which recoverable hydrogen is stored molecularly within clathrate cavities as well as chemically in the clathrate host material. X-ray diffraction and Raman spectroscopic measurements confirm the formation of beta-hydroquinone (beta-HQ) clathrate with molecular hydrogen. Hydrogen within the beta-HQ clathrate vibrates at considerably lower frequency than hydrogen in the free gaseous phase and rotates nondegenerately with splitting comparable to the rotational constant. Compared with water-based clathrate hydrate phases, the beta-HQ+H2 clathrate shows remarkable stability over a range of p-T conditions. Subsequent to clathrate decomposition, the host HQ was used to directly power a PEM fuel cell. With one H2 molecule per cavity, 0.61 wt % hydrogen may be stored in the beta-HQ clathrate cavities. When this amount is combined with complete dehydrogenation of the host hydroxyl hydrogens, the maximum hydrogen storage capacity increases nearly 300% to 2.43 wt %.     

Au(I) and Au(III) complexes of a sterically bulky benzimidazole-derived N-heterocyclic carbene

The reaction of [AuCl(SMe₂)] with in situ generated [AgCl(ⁱPr₂-bimy)] (ⁱPr₂-bimy = 1,3-diisopropylbenzimidazolin-2-ylidene), which in turn was obtained by the reaction of Ag₂O with 1,3-diisopropylbenzimidazolium bromide (ⁱPr₂-bimyH⁺Br⁻, A), afforded the monocarbene Au(I) complex [AuCl(ⁱPr₂-bimy)] (1). Subsequent reaction of 1 and the ligand precursor ⁱPr₂-bimyH⁺BF₄⁻, (B) in acetone in the presence of K₂CO₃ yielded the bis(carbene) complex [Au(ⁱPr₂-bimy)₂]BF₄ (2) as a white powder in 80% yield. The oxidative addition of elemental iodine to complex 2 gave the bis(carbene) Au(III) complex trans-[AuI₂(ⁱPr₂-bimy)₂]BF₄ (3) as an orange-red powder in 92% yield. All complexes 1-3 have been fully characterized by multinuclear NMR spectroscopies, ESI mass spectrometry, elemental analysis, and X-ray single crystal diffraction. Complexes 1 and 2 adopt a linear geometry around metal centers as expected for d¹⁰ metals. The geometry around the Au(III) metal center in 3 is essentially square-planar with two carbene ligands in trans-position to each other. Complex 3 shows absorption and photoluminescence properties owing to a ligand to metal charge transfer.     

Building a novel vitronectin assay by immobilization of integrin on calixarene monolayer

Membrane proteins possess significant hydrophobic domains and are likely to deplete their native activity immobilized on the solid surface relative to those occurring in a membrane environment. To investigate an efficient immobilization method, calix[4]crown-ether monolayer as an artificial protein linker system was constructed on the gold surface and characterized by Fourier transform infrared reflection absorption spectroscopy (FTIR-RAS), atomic force microscopy (AFM) and cyclic voltammetry (CV). Integrin alpha(v)beta3 was functionally immobilized onto the monolayer and the integrin-vitronectin interaction was investigated by surface plasmon resonance (SPR). It was found that calix[4]crown-ether was assembled as a monolayer on the gold surface. Orientation and accessibility of integrin alpha(v)beta3 was assessed by sensitive binding of its natural ligand, vitronectin at pg mL(-1) level. Moreover, surface coverage of integrin layer and thickness calculated through SPR curve simulation verified that integrin layer was a monolayer in activated form. In combination with the SPR method, this calix[4]crown monolayer provided a reliable and simple experimental platform for the investigation of isolated membrane proteins under experimental conditions resembling those of their native properties.     

Anisotropic diffusion of water in perfluorosulfonic acid membrane and hydrocarbon membranes

Polymer electrolyte membranes that are applied for polymer electrolyte fuel cell (PEFC) retain water in their three-dimensional network structure. Diffusion behavior of water in the membranes was analyzed by pulsed field gradient (PFG)-NMR method to estimate diffusion coefficient of proton species as water or hydronium ion. The membrane samples were put in a sample tube vertically or horizontally toward to the field gradient axis under determined temperature and humidity conditions. As the results, anisotropic diffusion behavior of water in the membranes was indicated. Anisotropic properties depended on the sample type, preparation conditions of the wet membranes, and measurement conditions. A perfluorosulfonic acid membrane tended to have smaller anisotropy while hydrocarbon membranes showed greater anisotropy.     

Porous Solids Arising from Synergistic and Competing Modes of Assembly: Combining Coordination Chemistry and Covalent Bond Formation

Design and synthesis of porous solids employing both reversible coordination chemistry and reversible covalent bond formation is described. The combination of two different linkage modes in a single material presents a link between two distinct classes of porous materials as exemplified by metal–organic frameworks (MOFs) and covalent organic frameworks (COFs). This strategy, in addition to being a compelling material‐discovery method, also offers a platform for developing a fundamental understanding of the factors influencing the competing modes of assembly. We also demonstrate that even temporary formation of reversible connections between components may be leveraged to make new phases thus offering design routes to polymorphic frameworks. Moreover, this approach has the striking potential of providing a rich landscape of structurally complex materials from commercially available or readily accessible feedstocks.