A light scattering study of the influence of poly(ethylene glycol) on the droplet size and the interdroplet interaction in a water-in-oil-microemulsion

Dynamic and static light scattering techniques were used to study the droplet size and the interdroplet interaction of w/o microemulsions consisting of cetyltrimethyl-ammonium bromide (CTAB), hexyl carbitol, toluene, water and poly(ethylene glycol). The results were analyzed in terms of a hard-sphere model with a perturbation. For the microemulsions without polymer, their droplet sizes increased only slightly (R=10.1 to 11.0 nm) and the perturbation became more attractive as the molar ratio of H₂O/CTAB was raised from 50 to 82. In contrast, an increase in polymer concentration or polymer molecular weight not only increased the droplet sizes but also changed the perturbation to become more repulsive. In addition, it is envisaged that the interactions between the cationic groups of CTAB and the ether linkages of the poly(ethylene glycol) may also enhance the rigidity of the interfaces, hence the stability of the microemulsions.     

Synthesis of substituted 1H-pyrrolo[3,2-c]quinolines

1H-2-Phenylpyrrolo[3,2-c]quinoline (1a) is made by thermal cyclization of quinol-4-yl hydrazone. Subsequent substitution of the C-3 hydrogen atom of the pyrrole ring of 1a with chlorine and a formyl group is easily achieved by reacting 1a with trichloroacetyl chloride and phosphorus oxychloride in DMF, respectively.     

Cloning and expression of the gene for xylose isomerase fromThermus flavus AT62 inEscherichia coli

The gene encoding xylose isomerase (xylA) was cloned fromThermus flavus AT62 and the DNA sequence was determined. ThexylA gene encodes the enzyme xylose isomerase (XI orxylA) consisting of 387 amino acids (calculated Mr of 44,941). Also, there was a partial xylulose kinase gene that was 4 bp overlapped in the end of XI gene. The XI gene was stably expressed inE. coli under the control oftac promoter. XI produced inE. coli was simply purified by heat treatment at 90°C for 10 min and column chromatography of DEAE-Sephacel. The Mr of the purified enzyme was estimated to be 45 kDa on SDS-polyacrylamide gel electrophoresis. However, Mr of the cloned XI was 185 kDa on native condition, indicating that the XI consists of homomeric tetramer. The enzyme has an optimum temperature at 90°C. Thermostability tests revealed that half life at 85°C was 2 mo and 2 h at 95°C. The optimum pH is around 7.0, close to where by-product formation is minimal. The isomerization yield of the cloned XI was about 55% from glucose, indicating that the yield is higher than those of reported enzymes. The Km values for various sugar substrates were calculated as 106 mM for glucose. Divalent cations such as Mn²⁺, Co²⁺, and Mg²⁺ are required for the enzyme activity and 100 mM EDTA completely inhibited the enzyme activity.     

Thermotropic liquid-crystalline properties of extended viologen bis(triflimide) salts

A series of extended, symmetric viologen triflimides were synthesised by the metathesis reaction of lithium triflimide with the respective viologen tosyalates in methanol. Their chemical structures were characterised by Fourier Transform Infrared, ¹H and ¹³C Nuclear Magnetic Resonance spectroscopy and elemental analysis. Their thermotropic liquid-crystalline (LC) properties were examined by a number of experimental techniques including differential scanning calorimetry, thermogravimetric analysis, polarising optical microscopy and variable temperature X-ray diffraction. The viologen salts containing alkyl chain of two carbon and three carbon atoms were relatively low melting salts. Those of alkyl chains of four carbon and five carbon atoms formed ionic liquids at 88 and 42°C, respectively. Those of alkyl chain of 9, 10 and 11 carbon atoms were high melting salts, as high as 166°C. Those of higher alkyl chains of 16, 18 and 20 carbon atoms showed thermotropic LC phases forming SmC, SmA and an unidentified smectic (SmX) phases, and showed SmA to isotropic transitions at high temperatures. As expected, all the viologen triflimides had excellent stabilities in the temperature range of 338–365°C.     

Heterocyclic thionates as a new class of bridging ligands in oxo-centered triangular cyclopentadienylchromium(III) complexes

The interactions of the benzothiazolate complex, CpCr(CO)(2)(SCSN(C(6)H(4))) (2), and the tetrazole thiolate complex, CpCr(CO)(3)(eta(1)-SCN(4)Ph) (3), with controlled amounts of Me(3)OBF(4) and (MeO)(2)SO(2), respectively, produced the corresponding mu(3)-oxo trinuclear thionate-bridged complexes, [Cp(3)Cr(3)(mu(2)-OH)(mu(3)-O)(mu(2)-eta(2)-SCSN(C(6)H(4)))(2)](5)BF(4) (45%) and [Cp(3)Cr(3)(mu(2)-OH)(mu(3)-O)(mu(2)-eta(2)-SCN(4)Ph)(2)](9)(MeOSO(3)) (53%), together with their respective free dimethylated thiolate ligands, [MeSCSNMe(C(6)H(4))](4)BF(4) and (Me(2)SCN(4)Ph)(8)MeOSO(3). The reaction of 3 with Me(3)OBF(4) resulted in the isolation of a binuclear complex, [Cp(2)Cr(2)(mu-OH)(mu-eta(2)-SCN(4)Ph)(2)](7)BF(4) (43%), and (8)BF(4) (27%). The reaction of the thiopyridine complex, CpCr(CO)(2)(SPy) (4), with I(2) also produced a similar mu(3)-oxo complex 10 (31%), together with CpCrI(2)(THF) (11) and the disulfide (SPy)(2). Similar reactions with 2 and 3 and I(2) yielded species 5 and 7, together with 11 and disulfides derived from their respective ligands. Cyclic voltammograms recorded in solutions of 5 and 9 indicated that the compounds could be reduced and oxidized at very similar potentials. An EPR spectrum characteristic of a compound with axial symmetry was obtained for 9 at 7 K. Single-crystal X-ray diffraction analyses confirmed that species 7 is dinuclear, whereas 5 and 9 are structural trinuclear analogues, each containing a mu(3)-oxo central core.     

Stereoregulation in the polymerization of methyl α-ethylacrylate by n-BuLi in toluene

The polymerization of methyl α-ethylacrylate was carried out in toluene by n-BuLi at various temperatures. The yield of the polymer decreased with increase in the polymerization temperature and at 30°C and above no polymer was obtained, indicating that the ceiling temperature of this monomer lay between 0 and 30°C. The isotacticity increased with an increase in the polymerization temperature and at 0°C a highly isotactic polymer was obtained. The fractionation of the polymer obtained at ?78°C showed that the polymer was a mixture of isotactic and syndiotactic ones. Upon the addition of a small amount of methanol or water in the polymerization mixture the isotacticity of the polymer increased while the yield decreased. Syndiotactic polymer was obtained in the polymerization by n-BuLi in tetrahydrofuran as well as by diisobutyl aluminum diphenylamide in toluene.     

Hydrophilic interaction liquid chromatography with tandem mass spectrometry for the determination of underivatized dencichine (beta-N-oxalyl-L-alpha,beta-diaminopropionic acid) in Panax medicinal plant species

Dencichine (beta-N-oxalyl-L-alpha,beta-diaminopropionic acid) is a haemostatic agent present in important Chinese medicinal herbs such as Panax notoginseng, as well as other Panax species. It is also a reported neurotoxic agent found in Lathyrus sativus (grass pea seed). A selective analytical method incorporating hydrophilic interaction chromatography with positive electrospray ionization tandem mass spectrometry (HILIC/ESI-MS/MS), for the analysis of dencichine in Panax plant species, was developed. Using multiple reaction monitoring (MRM) mode, underivatized dencichine, a small and highly polar compound, was selectively detected and quantified. The contents of dencichine in raw and steamed Panax notoginseng roots, 11 pairs of raw and steamed P. notoginseng herbal products, Panax ginseng roots, and Panax quinquefolium roots, were analyzed and compared. Optimal sensitivity of 0.3 ppm (detection limit) and 1.5 ppm (quantification limit) was achieved. The method was rapid (< or =5 min), with the HILIC peak eluting at about 1 min. Steamed P. notoginseng samples were found to contain less dencichine than the corresponding raw samples, and there were also differences among the three Panax species; raw P. ginseng and P. quinquefolium contained less dencichine than the raw P. notoginseng species. This rapid and specific method may be applied to the quantification of dencichine in complex medicinal plants and their products.     

The anti-inflammatory natural product parthenolide from the medicinal herb Feverfew directly binds to and inhibits IkappaB kinase

BACKGROUND: Biologically active natural products continue to be useful in the exploration and control of intracellular signaling processes. For example, the sesquiterpene lactone parthenolide from the anti-inflammatory medicinal herb Feverfew (Tanacetum parthenium) appears to inhibit the pro-inflammatory signaling pathway. Parthenolide's direct molecular target, however, remains unknown. We set out to identify the molecular mechanisms of parthenolide's anti-inflammatory activity. RESULTS: A parthenolide affinity reagent was synthesized and shown to bind directly to and inhibit IkappaB kinase beta (IKKbeta), the kinase subunit known to play a critical role in cytokine-mediated signaling. Mutation of cysteine 179 in the activation loop of IKKbeta abolished sensitivity towards parthenolide. Moreover, we showed that parthenolide's in vitro and in vivo anti-inflammatory activity is mediated through the alpha-methylene gamma-lactone moiety shared by other sesquiterpene lactones. CONCLUSIONS: In recent years, the multi-subunit IKK complex has been shown to be responsible for cytokine-mediated stimulation of genes involved in inflammation and as such represents an attractive target for pharmaceutical intervention. Our finding that parthenolide targets this kinase complex provides a possible molecular basis for the anti-inflammatory properties of parthenolide. In addition, these results may be useful in the development of additional anti-inflammatory agents.