Electrospinning synthesis and photocatalytic property of CaFe2O4/MgFe2O4 heterostructure for degradation of tetracycline

CaFe₂O₄/MgFe₂O₄ nanowires with heterostructure had been successfully synthesized by electrospinning method. The obtained samples were systematically characterized by scanning electron microscopy (SEM), X‐Ray diffraction (XRD), UV–Vis diffuse reflectance spectra (UV‐Vis DR) and Environment scanning electron microscopy (ESEM). The novel CaFe₂O₄/MgFe₂O₄ nanowires exhibit an enhanced photocatalytic activity for degrading of tetracycline (TC) under visible light. Compared with bare CaFe₂O₄ or MgFe₂O₄ samples, the prepared CaFe₂O₄/MgFe₂O₄ (Ca:Mg:Fe = 3:2:10) composited nanowires show the best photocatalytic performance with a degradation efficiency of 40% after 150 min reaction time. This enhancement is attributed to the heterostructure of CaFe₂O₄/MgFe₂O₄ nanowires, which effectively repress the recombination of photo‐generated electrons and holes. Based on heterostructure and energy band positions, the enhancement of mechanism under visible‐light enhances the photocatalytic activity.     

Synthesis of Poly(ϵ-caprolactone) Grafted Poly(2-hydroxyethyl methacrylate) Functionalized Hydroxyapatite by RAFT and ROP

Poly(?-caprolactone) grafted poly(2-hydroxyethyl methacrylate) functionalized hydroxyapatite (HAP@PHEMA-g-PCL) nanocomposites were synthesized by the combination of reversible addition fragmentation chain transfer (RAFT) polymerization and ring-opening polymerization (ROP). The RAFT agent was anchored on the surface of hydroxyapatite nanocrystals (HAPs) through the silane condensation process of 3-chloropropyltrimethoxysilane followed by reaction with potassium xanthogenate. Poly(2-hydroxyethyl methacrylate) (PHEMA) was covalently functionalized on the surface of HAPs by RAFT polymerization. Then, poly(?-caprolactone) (PCL) was grafted on HAPs by ROP based on the hydroxyl groups of PHEMA to afford HAP@PHEMA-g-PCL. The structure and composition of HAP@PHEMA-g-PCL nanocomposites were characterized by FT-IR, XRD, and TGA analyses. The morphology and formation of the polymer encapsulating HAPs were demonstrated from SEM and TEM images, while the ¹H MNR analysis of the cleaved PHEMA-g-PCL confirmed the grafting.     

Azobenzene‐Functionalized Metal–Organic Polyhedra for the Optically Responsive Capture and Release of Guest Molecules

Stimuli‐responsive metal–organic polyhedra (srMOPs) functionalized with azobenzene showed UV‐irradiation‐induced isomerization from the insoluble trans‐srMOP to the soluble cis‐srMOP, whereas irradiation with blue light reversed this process. Guest molecules were trapped and released upon cis‐to‐trans and trans‐to‐cis isomerization of the srMOPs, respectively. This study provides a new direction in the ever‐diversifying field of MOPs, while laying the groundwork for a new class of optically responsive materials.     

Physical and electrochemical properties of (La0.3Sr0.7)0.93TiO3–δ synthesized by Pechini method as an anode material for solid oxide fuel cells

The lanthanum strontium titanate (LST) has to be calcined at significantly high temperature (above 1,300 °C) to obtain its pure perovskite structure when synthesized by conventional solid-state method, which is main reason for reducing active surface area. In this study, A-site deficient (La_0.3Sr_0.7)_0.93TiO₃ was synthesized by Pechini method. Although the prepared powders were calcined at 600 °C, the pure perovskite structure can be obtained without any secondary phase such as TiO₂. Moreover, the porosity and surface area are 6 times and one order of magnitude higher in the LST powders synthesized by Pechini method than in the powders synthesized by solid-state method. Based on these results, the LST electrode (Pechini) leads to two times lower electrode resistance than the LST electrode (solid-state). Thus, the LST powders synthesized by Pechini can contributes to saving the energy needed for calcination process as well as increasing the porosity and active surface area, enhancing physical and electrochemical properties in SOFC anode.     

Synthesis of Site‐Specifically Phosphate‐Caged siRNAs and Evaluation of Their RNAi Activity and Stability

A complete set of new photolabile nucleoside phosphoramidites were synthesized, then site‐specifically incorporated into sense or antisense strands of siRNA for phosphate caging. Single caging modification was made along siRNA strands and their photomodulation of gene silencing were examined by using the firefly luciferase reporter gene. Several key phosphate positions were then identified. Furthermore, multiple caging modifications at these key positions led to significantly enhanced photomodulation of gene silencing activity, suggesting a synergistic effect. The caging group on both the terminally phosphate‐caged siRNA and the single‐stranded caged RNA has comparatively high stability, whereas hydrolysis of the caged group from the internally caged siRNA was observed, irrespective of the presence of Mg²⁺. Molecular dynamic simulations demonstrated that enhanced hydrolysis of the caging group on internally phosphate‐caged siRNAs was due to easy fragmentation of the caging group upon formation of the pentavalent intermediate of the phosphotriester with attack by water. The caging group in the terminally phosphate‐caged siRNA or single‐stranded caged RNA prefers to form π–π stacks with nearby nucleobases. In addition to providing explanations for previous observations, this study sheds further light on the design of caged oligonucleotides and indicates the direction of future development of nucleic acid drugs with phosphate modifications.     

Roles of xyloglucan and pectin on the mechanical properties of bacterial cellulose composite films

Xyloglucan and pectin are major non-cellulosic components of most primary plant cell walls. It is believed that xyloglucan and perhaps pectin are functioning as tethers between cellulose microfibrils in the cell walls. In order to understand the role of xyloglucan and pectin in cell wall mechanical properties, model cell wall composites created using Gluconacetobacter xylinus cellulose or cellulose nanowhiskers (CNWs) derived there from with different amounts of xyloglucan and/or pectin have been prepared and measured under extension conditions. Compared with pure CNW films, CNW composites with lower amounts of xyloglucan or pectin did not show significant differences in mechanical behavior. Only when the additives were as high as 60 %, the films exhibited a slightly lower Young’s modulus. However, when cultured with xyloglucan or pectin, the bacterial cellulose (BC) composites produced by G. xylinus showed much lower modulus compared with that of the pure BC films. Xyloglucan was able to further reduce the modulus and extensibility of the film compared to that of pectin. It is proposed that surface coating or tethering of xyloglucan or pectin of cellulose microfibrils does not alone affect the mechanical properties of cell wall materials. The implication from this work is that xyloglucan or pectin alters the mechanical properties of cellulose networks during rather than after the cellulose biosynthesis process, which impacts the nature of the connection between these compounds.     

Exceedingly Fast Copper(II)‐Promoted ortho CH Trifluoromethylation of Arenes using TMSCF3

The direct ortho‐trifluoromethylation of arenes, including heteroarenes, with TMSCF₃ has been accomplished by a copper(II)‐promoted C? H activation reaction which completes within 30 minutes. Mechanistic investigations are consistent with the involvement of C? H activation, rather than a simple electrophilic aromatic substitution (S_EAr), as the key step.     

Iodonium Metathesis Reactions

A metathesis reaction occurs when a diaryliodonium triflate is heated with an aryl iodide, resulting in the formation of a new diaryliodonium triflate.     

Production and Characterization of a Novel Thermostable Extracellular Agarase from Pseudoalteromonas hodoensis Newly Isolated from the West Sea of South Korea

A Gram-negative, aerobic, motile, rod-shaped, agarolytic bacterium, designated as H7, was isolated from a coastal seawater sample. This strain grows at pH 6.0–8.0, temperature of 15–40 °C, and at an NaCl concentration of 1–7 % (w/v). Ubiquinone-8 was the predominant respiratory quinone, and the DNA G+C content was 45.82 mol%. Analysis of the 16S rRNA sequence suggests that strain H7 belongs to the genus Pseudoalteromonas. DNA-DNA hybridization analysis showed DNA relatedness of as low as 55.42 and 40.27 % with its nearest phylogenetic neighbors Pseudoalteromonas atlantica IAM12927^T and Pseudoalteromonas espejiana NCIMB2127^T, respectively, which led us to name H7 Pseudoalteromonas hodoensis sp. nov. The type strain is H7^T (=DSM25967^T = KCTC23887^T). An agarase (AgaA7) was purified to homogeneity from the cell-free culture broth of H7 through many steps of chromatography. Purified AgaA7 had an apparent molecular weight of 35 kDa, with a distinct NH₂-terminal sequence of Ala-Asp-Ala-Thr-X-Pro (X, any amino acid) from the reported proteins, implying that it is a novel enzyme. The optimum pH and temperature for agarase activity were 7.0 and 45 °C, respectively. Thin-layer chromatography analysis, mass spectrometry, and enzyme assay using p-nitrophenyl-α/β-D-galactopyranoside revealed that AgaA7 is both an exo- and endo-type β-agarase that degrades agarose into neoagarotetraose, neoagarohexaose, and neoagarooctaose (minor).     

Porous Tantalum Nitride Single Crystal at Two-Centimeter Scale with Enhanced Photoelectrochemical Performance

Porous tantalum nitride (Ta₃N₅) single crystals, combining structural coherence and porous microstructure, would substantially improve the photoelectrochemical performance. The structural coherence would reduce the recombination of charge carriers and maintain excellent transport properties while the porous microstructure would not only reduce photon scattering but also facilitate surface reactions. Here, we grow bulk-porous Ta₃N₅ single crystals on a two-centimeter scale with (002), (023), and (041) facets, respectively, and show significantly enhanced photoelectrochemical performance. We show the preferential facet growth of porous crystals in a lattice reconstruction strategy in relation to lattice match and lattice channel. We present the facet engineering to enhance light absorption, exciton lifetime and transport properties. The porous Ta₃N₅ single crystal boosts photoelectrochemical oxidation of alcohols with the (002) facet showing the highest performance of >99 % alcohol conversion and >99 % aldehyde/ketone selectivity.