Simultaneous determination of hypoxanthine,inosine, inosine-5′-phosphate and adenosine-5′-phosphate with a multielectrode enzyme sensor

A multielectrode enzyme sensor for the simultaneous determination of adenosine-5′-phosphate (AMP), inosine-5′-phosphate (IMP), inosine (HXR) and hypoxanthine (HX)in fish meat was developed by assembling four enzyme sensors for AMP, IMP, HXR and HX in a flow cell. These compounds were determined from oxygen consumption according to the following reactions: AMP $\text{AD}$ IMP $\text{NT}$ HXR $\text{NP, PO}{}^{\mathrm{3?}}{}_4$ HX $\text{XO, O}{}_2$ Uric acid where AD is AMP deaminase, NT is 5′-nucleotidase, NP is nucleoside phosphorylase and XO is xanthine oxidase. Enzymes were covalently bound to a membrane prepared from cellulose triacetate, 1,8-diamino-4-aminomethyloctane and glutaraldehyde. Sensors for HX, HXR, IMP and AMP were prepared by attaching membranes of XO, XONP, XO NPNT, and of XONPNT and AD, respectively, to four oxygen electrodes. Samples extracted from sea bass, bream, flounder, abalone and arkshell were analyzed within 5 min, from the simultaneous response curves of the four electrodes. Results obtained by the multisensor system were in good agreement with those determined by each single electrode.     

Synthesis and structure of 5,6,7,12-tetrahydrodibenz[c,f][1,5]azabismocines

Hypervalent organobismuth compounds, 6-tert-butyl-5,6,7,12-tetrahydrodibenz[c,f][1,5]azabismocines, with 13 different substituents on the bismuth atom including halogens, alkyl, alkenyl, alkynyl, aryl, or phenylthio groups have been synthesized. A key compound, 12-chloro-6-tert-butyl-5,6,7,12-tetrahydrodibenz[c,f][1,5]azabismocine, which is a precursor for other azabismocines, has been synthesized by two different procedures; one is based on Akiba’s method using 2-bromobenzylbromide as one of the starting materials and the other is a newly developed one using a cheaper starting material, 2-chlorobenzyl chloride. The structures of 12 new bismuth compounds were determined by X-ray diffraction. The eight-membered tetrahydroazabismocine ring has proved to be highly flexible and the hypervalent Bi-N bond distances vary ranging from 2.568(3) to 2.896(5) Å, depending on the electronic nature of the substituents on the bismuth atom. The Bi-N bond distances have good linear relationship against Hammett’s σ_m constants.     

Structure-activity relationship (SAR) studies on oxazolidinone antibacterial agents. 1. Conversion of 5-substituent on oxazolidinone

A structure-activity relationship (SAR) study on 5-substituted oxazolidinones as an antibacterial agent is described. The oxazolidinones, of which 5-acetylaminomethyl moiety was converted into other functions, were prepared and evaluated for antibacterial activity. Elongation of the methylene chain (8) and conversion of the acetamido moiety into guanidino moiety (12) decreased the antibacterial activity. The replacement of carbonyl oxygen (=O) by thiocarbonyl sulfur (=S) enhanced in vitro antibacterial activity. Especially, compound 16, which had the 5-thiourea group, showed 4-8 stronger in vitro activity than linezolid. Our SAR study revealed that the antibacterial activity was greatly affected by the conversion of 5-substituent.     

Photopolymerization of cyclohexene oxide by use of o-nitrobenzyl triphenylsilyl ether/aluminum compound catalyst. Dependence of catalyst activity on the structure of the silyl ether

o-Nitrobenzyl triphenylsilyl ehther/aluminum compound has been previously shown by the authors to act as catalyst in the photopolymerization of epoxides. The dependence of the structure of the silyl ether on the catalyst activity was examined. There were two steps in the photopolymerization. The first step (“Step 1”) is photodecomposition of the silyl ether to silanol. The second step (“Step 2”) is the initiation of polymerization by silanol and the aluminum compound. The introduction of an electron withdrawing group, Cl, CF₃, on the benzene ring bonded to Si made the quantum yield of Step 1 low, however, the rate of Step 2 was increased. The low quantum yield of Step 1 was explained in terms of the rate of electron transfer that is controlled by the relative electron density between the CH₂ and NO₂ in the o-nitrobenzyl group. The acceleration of Step 2 was explained in terms of an increase in silanol acidity that was promoted by the introduction of an electron withdrawing group. The overall rate of the photopolymerizatiol depends to a greater degree on the rate of Step 2 than on that of Step 1.     

Group separation of trivalent actinides and lanthanides by tertiary pyridine-type anion-exchange resin embedded in silica beads

The separation of trivalent actinides and lanthanides was studied by using newly developed tertiary pyridine-type anion-exchange resin embedded in silica beads. Chromatographic elution experiments were carried out by using a packed column of the new resin and methanol-hydrochloric acid solution as an effluent. We confirmed that the actinides were eluted well from the elution bands of lanthanides. Actinides and lanthanides were eluted according to the reverse order of their atomic number.     

Slurry sampling techniques for the determination of lead in Bangladeshi fish samples by electrothermal atomic absorption spectrometry with a metal tube atomizer

Ultrasonic slurry sampling electrothermal atomic absorption spectrometry with a metal tube atomizer has been applied to the determination of lead in Bangladeshi fish samples. The slurry sampling conditions, such as slurry stabilizing agent, slurry concentration, pyrolysis temperature for the slurried fish samples, particle size and ultrasonic agitation time, were optimized for electrothermal atomic absorption spectrometry with the Mo tube atomizer. Thiourea was used as the chemical modifier for the interference of matrix elements. The detection limit was 53 fg (3S/N). The determined amount of lead in Bangladeshi fish samples was consistent with those measured in the dissolved acid-digested samples. The advantages of the proposed methods are easy calibration, simplicity, low cost and rapid analysis.     

NMR and MO Studies on the Molecular Structure of a Fluoranthene-Benzene Complex

Summary. Fluoranthene (FA) forms a 1:1 van der Waals complex with benzene in cyclohexane. The ¹H NMR spectrum of this complex shows that the FA moiety in the complex state has five kinds of hydrogen atoms and that the ¹H NMR peaks assigned to the protons attached to the naphthalene skeleton are largely shifted to higher magnetic field on complex formation with benzene. These observations indicate that the complex takes the structure of C_S symmetry, in which the benzene molecule mainly interacts with the electronic system localized on the naphthalene moiety of FA. The present ab initio calculations reproduce well the ¹H NMR spectral shifts mentioned above and the experimentally predicted C_S structure of the complex. According to the PPP calculations for the electronic absorption spectral changes on the complex formation, the FA-benzene complex is considered to take a sandwich type structure.     

Effect of initiators on grafting in the initial stage of the emulsion polymerization of methyl methacrylate using poly(vinyl alcohol) as a protective colloid

 To make clear the reason of unsuitability of poly(vinyl alcohol) (PVA) protective colloid for the emulsion polymerization of conjugated monomers, a model experiment of emulsion polymerization of methyl methacrylate (MMA) was carried out with ammonium persulfate (APS) or azobis(isobutyronitrile) (AIBN) initiators, where a small amount of MMA (1/100th of the concentration compared with ordinary emulsion polymerization) was employed. This corresponds to the initial stage of the emulsion polymerization. Grafting of MMA onto PVA took place remarkably irrespective of the kind of the initiators. Formation of homo-poly(MMA) was observed to a small extent. The formation of new emulsion particles smaller than 100 nm continued to increase to almost the end of the polymerization. PVA molecules in the grafted polymer are supposed to act as stabilizers of newly formed particles. From kinetic treatment using the experimental data, the important issues were derived as follows. Firstly, the sulfate anion radical from APS is much more reactive than the isobutyronitrile radical from AIBN in terms of hydrogen abstraction from PVA. Secondly, high grafting ability of the latter initiator system, notwithstanding the much lower reactivity in the hydrogen abstraction compared with the APS system, is attributed to the relative reactivity of the primary radicals, i.e., hydrogen abstraction reaction from PVA to initiation reaction with MMA. The much slower rate of addition of the isobutyronitrile radical to the monomer compared with that of hydrogen abstraction from PVA facilitates the grafting, although the rate constant of hydrogen abstraction is far smaller than that with the sulfate anion radical by 10⁻⁴ times. Received: 26 April 2001 Accepted: 6 September 2001     

A potentiometric microbial sensor based on immobilized escherichia coli for glutamic acid

The sensor consists of immobilized E. coli (which contains glutamate decarboxylase) and a carbon dioxide gas-sensor. Continuous introduction of sample solution into a flow system incorporating the sensor gives a potential which increases until a steady state is reached after 5 min. Measurements can also be made with only a 1- or 3-min introduction period with little loss of sensitivity. Calibration plots of mV measurements vs. logarithmic glutamic acid concentration are linear in the range 100–800 mg l^-1. The sensor is highly selective, stable and reproducible. It has been applied to the determination of glutamic acid in fermentation broths.     

Structural and spectroscopic characterization of (mu-hydroxo or mu-oxo)(mu-peroxo)diiron(III) complexes: models for peroxo intermediates of non-heme diiron proteins

(mu-Hydroxo or oxo)(mu-1,2-peroxo)diiron(III) complexes having a tetradentate tripodal ligand (L) containing a carboxylate sidearm [Fe2(mu-OH or mu-O)(mu-O2)(L)2]n+ were synthesized as models for peroxo-intermediates of non-heme diiron proteins and characterized by various physicochemical measurements including X-ray analysis, which provide fundamental structural and spectroscopic insights into the peroxodiiron(III) complexes.