Stereo structure-controlled and electronic structure-controlled estrogen-like chemicals to design and develop non-estrogenic bisphenol A analogs based on chemical hardness concept

The aim of this study was to elucidate the structure-activity relationship of bisphenol A (BPA) analogs using absolute hardness (eta) and absolute electronegativity (chi) (chemical hardness) and to design a non-estrogen active BPA. To determine the structure-activity relationships of BPA analogs, we investigated MCF-7 cell proliferation stimulated by BPA analogs and an eta-chi diagram based on the electronic structure of the BPA analogs. The results show that the actions of the environmental hormones BPA analogs have two chemical properties; (i) 'stereo structure-controlled' and (ii) 'electronic structure-controlled' estrogen-like chemical activities. Therefore, we designed and synthesized BPA analogs which do not possess these 2 characteristics, ((i) and (ii)), and demonstrate the non-estrogen activity of the analog.     

Syntheses, structural determinations of [Ru(ROCS2)2(PPh3)2](+/0) pairs, and kinetic analyses of thermal reactions involving transient trans-[Ru(iPrOCS2)2(PPh3)2] species (ROCS2(-) = ethyl- or isopropyldithiocarbonate and PPh3 = triphenylphosphine)

Controlled-potential electrochemical oxidation of cis-[Ru(ROCS2)2(PPh3)2] (R = Et, iPr) yielded corresponding Ru(III) complexes, and the crystal structures of cis-[Ru(ROCS2)2(PPh3)2] and trans-[Ru(ROCS2)2(PPh3)2](PF6) were determined. Both pairs of complexes exhibited almost identical coordination structures. The Ru-P distances in trans-[Ru(III)(ROCS2)2(PPh3)2](PF6) [2.436(3)-2.443(3) A] were significantly longer than those in cis-[Ru(II)(ROCS2)2(PPh3)2] [2.306(1)-2.315(2) A]: the smaller ionic radius of Ru(III) than that of Ru(II) stabilizes the trans conformation for the Ru(III) complex due to the steric requirement of bulky phosphine ligands while mutual trans influence by the phosphine ligands induces significant elongation of the Ru(III)-P bonds. Cyclic voltammograms of the cis-[Ru(ROCS2)2(PPh3)2] and trans-[Ru(ROCS2)2(PPh3)2]+ complexes in dichloromethane solution exhibited typical dual redox signals corresponding to the cis-[Ru(ROCS2)2(PPh3)2](+/0) (ca. +0.15 and +0.10 V vs ferrocenium/ferrocene couple for R = Et and iPr, respectively) and to trans-[Ru(ROCS2)2(PPh3)2](+/0) (-0.05 and -0.15 V vs ferrocenium/ferrocene for R = Et and iPr, respectively) couples. Analyses on the basis of the Nicholson and Shain's method revealed that the thermal disappearance rate of transient trans-[Ru(ROCS2)2(PPh3)2] was dependent on the concentration of PPh3 in the bulk: the rate constant for the intramolecular isomerization reaction of trans-[Ru(iPrOCS2)2(PPh3)2] was determined as 0.338 +/- 0.004 s(-1) at 298.3 K (deltaH* = 41.8 +/- 1.5 kJ mol(-1) and deltaS* = -114 +/- 7 J mol(-1) K(-1)), while the dissociation rate constant of coordinated PPh3 from the trans-[Ru(iPrOCS2)2(PPh3)2] species was estimated as 0.113 +/- 0.008 s(-1) at 298.3 K (deltaH* = 97.6 +/- 0.8 kJ mol(-1) and deltaS* = 64 +/- 3 J mol(-1) K(-1)), by monitoring the EC reaction (electrode reaction followed by chemical processes) at different concentrations of PPh3 in the bulk. It was found that the trans to cis isomerization reaction takes place via the partial dissociation of iPrOCS2(-) from Ru(II), contrary to the previous claim that it takes place by the twist mechanism.     

Synthesis of anionic methylpalladium complexes with phosphine-sulfonate ligands and their activities for olefin polymerization

Reaction of diarylphosphinobenzene-2-sulfonic acids with tertially amines, followed by addition of [PdMeCl(cod)], provided anionic methylpalladium(II) complexes with bidentate phosphine-sulfonate ligands, which show high activity for copolymerization of ethylene with methyl acrylate.     

In situ UV-vis and EPR study on the formation of hydroperoxide species during direct gas phase propylene epoxidation over Au/Ti-SiO(2) catalyst

In recent years, there have been great experimental and theoretical advances in the understanding of the epoxidation of propylene by O(2) and H(2) over Au supported on titanium-containing oxidic supports; however, thus far spectroscopic evidence of reacting species for proposed mechanisms has been lacking. Hydroperoxide species have been postulated as an intermediate responsible for the epoxidation of propylene with O(2) and H(2). In order to obtain direct evidence for the different type of active oxygen species, in situ UV-vis and EPR measurements were carried out during the epoxidation of propylene with O(2) and H(2) over a Au/Ti-SiO(2) (Ti/Si = 3:100) catalyst. It was determined that the adsorbed species of oxygen (O(2)(-)) resided on Au, more likely at a perimeter site, and it led to the formation of titanium hydroperoxo species. These results support the possible mechanism of formation of these hydroperoxo species via H(2)O(2) produced from O(2) and H(2) adsorbed on the Au surfaces.     

Stereocontrolled syntheses of alpha-C-mannosyltryptophan and its analogues

The total synthesis of alpha-C-mannosyltryptophan (C-Man-Trp), a naturally occurring C-glycosylamino acid, was achieved from a commercially available alpha-methyl-D-mannoside in 10 steps including the following key steps: the C-glycosidation of a mannose derivative with a stannylacetylene, Castro indole synthesis, and Sc(ClO4)3-promoted coupling with L-serine-derived aziridine carboxylate. The glucose- and galactose-analogues of C-Man-Trp were also synthesized in a similar manner. Conformational analyses of the synthesized C-glycosyltryptophan and its synthetic intermediate are briefly discussed.     

Solid state structures of pentacoordinated lambda3-iodanes with a trigonal bipyramidal geometry: synthesis of diphenyl- and alkynyl(phenyl)-lambda3-iodane complexes with 1,10-phenanthroline

The single crystal X-ray structure of the supramolecular complex formed between diphenyl-lambda3-iodane (Ph2IBF4) or 1-alkynyl(phenyl)-lambda3-iodane [Bu(t)CCI(Ph)BF4] and 1,10-phenanthroline indicates a hitherto unknown distorted trigonal bipyramidal geometry around iodine(III), in which 1,10-phenanthroline acts as a bidentate ligand and occupies equatorial sites.     

Synthesis and structure of supramolecular complexes between 1-alkynyl(phenyl)(tetrafluoroborato)-λ-iodanes and 18-crown-6

Slow evaporation of a solution of 1-decynyl(phenyl)(tetrafluoroborato)-λ³-iodane and 18-crown-6 in dichloromethane-diethyl ether-hexane gave a supramolecular 1:1 complex, while 3,3-dimethyl-1-butynyl- and phenylethynyl(phenyl)(tetrafluoroborato)-λ³-iodanes afforded 2:1 complexes. Complexation with 18-crown-6 increased the thermal stability of the phenylethynyl-λ³-iodane. Solid state and solution structures of these complexes were examined by single crystal X-ray analyses, ¹H and ¹³C NMR spectra, and cold-spray ionization MS. Binding constants were measured by ¹H NMR titrations.     

Redox reaction of PEO modified cytochrome c adsorbed on the electrode in ion conductive PEO matrix analyzed with non-contact optical waveguide spectroscopy

Optical waveguide spectroscopy was used under non-contact conditions to analyze the visible absorption spectrum of poly(ethylene oxide) (M _w = 150) modified cytochrome c (PEO₁₅₀-cyt.c) adsorbed on an indium tin oxide (ITO) glass electrode. The redox reactions of the adsorbed PEO₁₅₀-cyt.c were dynamically measured in situ in PEO oligomers (M _w = 200). It was confirmed that PEO modification of cyt.c is effective in maintaining the redox activity of the cyt.c after adsorption on the ITO glass electrode. The PEO₁₅₀-cyt.c adsorbed on the electrode re-dissolved gradually in PEO oligomer. Against this, PEO₁₀₀₀-cyt.c having longer PEO chains (M _w = 1000) was found to be adsorbed stably on the electrode. Copyright © 2003 John Wiley & Sons, Ltd.     

Mimicking protein-protein electron transfer: voltammetry of Pseudomonas aeruginosa azurin and the Thermus thermophilus Cu(A) domain at omega-derivatized self-assembled-monolayer gold electrodes

Well-defined voltammetric responses of redox proteins with acidic-to-neutral pI values have been obtained on pure alkanethiol as well as on mixed self-assembled-monolayer (SAM) omega-derivatized alkanethiol/gold bead electrodes. Both azurin (P. aeruginosa) (pI = 5.6) and subunit II (Cu(A) domain) of ba(3)-type cytochrome c oxidase (T. thermophilus) (pI = 6.0) exhibit optimal voltammetric responses on 1:1 mixtures of [H(3)C(CH(2))(n)()SH + HO(CH(2))(n)()SH] SAMs. The electron transfer (ET) rate vs distance behavior of azurin and Cu(A) is independent of the omega-derivatized alkanethiol SAM headgroups. Strikingly, only wild-type azurin and mutants containing Trp48 give voltammetric responses: based on modeling, we suggest that electronic coupling with the SAM headgroup (H(3)C- and/or HO-) occurs at the Asn47 side chain carbonyl oxygen and that an Asn47-Cys112 hydrogen bond promotes intramolecular ET to the copper. Inspection of models also indicates that the Cu(A) domain of ba(3)-type cytochrome c oxidase is coupled to the SAM headgroup (H(3)C- and/or HO-) near the main chain carbonyl oxygen of Cys153 and that Phe88 (analogous to Trp143 in subunit II of cytochrome c oxidase from R. sphaeroides) is not involved in the dominant tunneling pathway. Our work suggests that hydrogen bonds from hydroxyl or other proton-donor groups to carbonyl oxygens potentially can facilitate intermolecular ET between physiological redox partners.