A new biomaterial,hen egg shell membrane,to eliminate heavy metal ion from their dilute waste solution

The egg shell membrane (ESM) is an intricate lattice network of stable and water-insoluble fibers with high surface area. ESM accumulates and eliminates various heavy metal ions from dilute aqueous solution with high affinity and in short contact time, depending on pH and characteristics of the individual ion. Under certain conditions, the level of precious ions, Au, Pt, and Pd accumulation approaches 55, 25, and 22% of dry wt of ESM, respectively. Also uranium uptake 30% of that of ESM. Experiments suggested that ESM is promising to use for the purpose of removal/recovery of metals and water pollution control.     

Determination and purification of sesamin and sesamolin in sesame seed oil unsaponified matter using reversed‐phase liquid chromatography coupled with photodiode array and tandem mass spectrometry and high‐speed countercurrent chromatography

In Asian countries, sesame seed oil unsaponified matter is used as a natural food additive due to its associated antioxidant effects. We determined and purified the primary lignans sesamin and sesamolin in sesame seed oil unsaponified matter using reversed‐phase liquid chromatography coupled with photodiode array and tandem mass spectrometry and high‐speed countercurrent chromatography. Calibration curves showed good correlation coefficients (r² > 0.999, range 0.08 and/or 0.15 to 5 μg/mL) with a limit of detection (at 290 nm) of 0.02 μg/mL for sesamin and 0.04 μg/mL for sesamolin. Sesame seed oil unsaponified matter contained 2.82% sesamin and 2.54% sesamolin, respectively. Direct qualitative analysis of sesamin and sesamolin was achieved using quadrupole mass spectrometry with positive‐mode electrospray ionization. Pure (>99%) sesamin and sesamolin standards were obtained using high‐speed countercurrent chromatographic purification (hexane/ethyl acetate/methanol/water; 7:3:7:3). An effective method for determining and purifying sesamin and sesamolin from sesame seed oil unsaponified matter was developed by combining these separation techniques for standardized food additives.     

Neocrocin A: a novel crocetin glycoside with a unique system for binding sugars isolated from gardenia yellow

A novel crocetin glycosyl ester, neocrocin A (2), was isolated from gardenia yellow. The structure of 2 was elucidated as that of an all-trans-crocetin beta-D-gentiobiosyl beta-D-glucopyranosyl-(1-->6)-D-2-deoxy-glucopyranos-2-yl diester based on chemical and spectral data. The findings provide evidence that the binding system of crocetin glycosides is not limited to the anomeric position.     

Synthesis of Indolones via Radical Cyclization of N‐(2‐Halogenoalkanoyl)‐Substituted Anilines

The radical reactions of N‐(2‐halogenoalkanoyl)‐substituted anilines (anilides) of type 1 have been investigated under various conditions. Treatment of compounds 1a – 1o with Bu₃SnH in the presence of (2,2′‐azobis(isobutyronitrile) (AIBN) afforded a mixture of the indolones (oxindoles) 2a – 2o and the reduction products 5a – 5o (Table 1). In contrast, the N‐unsubstituted anilides 1p – 1s, 1u , and 1v gave the corresponding reduction products exclusively (Table 1). Similar results were obtained by treatment of 1 with Ni powder (Table 2) or wth Et₃B (Table 3). Anilides with longer N‐(phenylalkyl) chains such as 6 and 7 were inert towards radical cyclization, with the exception of N‐benzyl‐2‐bromo‐N,2‐dimethylpropanamide ( 6b ), which, upon treatment with Ni powder in i‐PrOH, afforded the cyclized product 9b in low yield (Table 4). Upon irradiation, the extended anilides 6, 7, 10 , and 11 yielded the corresponding dehydrobromination products exclusively (Table 5).     

UV-Vis, NMR, and time-resolved spectroscopy analysis of photoisomerization behavior of three- and six-azobenzene-bound tris(bipyridine)cobalt complexes

The photoisomerization properties of tris(bipyridine)cobalt complexes containing six or three azobenzene moieties, namely, [Co(II)(dmAB)3](BF4)2 [dmAB = 4,4'-bis[3'-(4'-tolylazo)phenyl]-2,2'-bipyridine], [Co(III)(dmAB)3](BF4)3, [Co(II)(mAB)3](BF4)2 [mAB = 4-[3' '-(4' '-tolylazo)phenyl]-2,2'-bipyridine], and [Co(III)(dmAB)3](BF4)3, derived from the effect of gathering azobenzenes in one molecule and the effect of the cobalt(II) or cobalt(III) ion were investigated using UV-vis absorption spectroscopy, femtosecond transient spectroscopy, and 1H NMR spectroscopy. In the photostationary state of these four complexes, nearly 50% of the trans-azobenzene moieties of the Co(II) complexes were converted to the cis isomer, and nearly 10% of the trans-azobenzene moieties of the Co(III) complexes isomerized to the cis isomer, implying that the cis isomer ratio in the photostationary state upon irradiation at 365 nm is controlled not by the number of azobenzene moieties in one molecule but rather by the oxidation state of the cobalt ions. The femtosecond transient absorption spectra of the ligands and the complexes suggested that the photoexcited states of the azobenzene moieties in the Co(III) complexes were strongly deactivated by electron transfer from the azobenzene moiety to the cobalt center to form an azobenzene radical cation and a Co(II) center. The cooperation among the photochemical structural changes of six azobenzene moieties in [Co(II)(dmAB)3](BF4)2 was investigated with 1H NMR spectroscopy. The time-course change in the 1H NMR signals of the methyl protons indicated that each azobenzene moiety in [Co(II)(dmAB)3](BF4)2 isomerized to a cis isomer with a random probability of 50% and without interactions among the azobenzene moieties.     

Novel gas chromatography-mass spectrometry database for automatic identification and quantification of micropollutants

A novel gas chromatography-mass spectroscopy (GC-MS) database for identification and quantification of micropollutants in environmental and food samples is reported. GC retention times, calibration curves, and mass spectra of nearly 700 chemicals were registered in the database, and the GC retention times of registered chemicals in actual samples were predicted from the retention times of n-alkanes measured before sample analysis. Differences between predicted and actual retention times were less than 3 s, an accuracy that is nearly identical to that obtained by analysis of standard substances. After the retention times were predicted, a calibration file for the GC-MS instrument was created from the predicted retention times, calibration curves, and mass spectra of the registered chemicals. With the resulting calibration file, automated identification of all the chemicals in actual samples was possible without the use of standards, and the identification method was as reliable as conventional methods. When the GC inlet, column, and tuning conditions were adjusted using GC-MS performance check standards, relative standard deviations of 20% or less for determination values could be obtained. More than 90% of the chemicals in the database could be detected at a sensitivity sufficient for all practical purposes (100 pg or less). Because each chemical in the database, to which new substances can easily be added, can be determined in 1 h, micropollutants in samples can be analyzed efficiently and inexpensively.     

The behaviour of dyes at oil/water interfaces

Summary The adsorption of ionic dyes, the builder effect, and the interaction between ionic dyes and surface active agents were investigated by using the electrocapillarity at oil/water interfaces. The oil phase was the solution of tetra-butylammonium chloride, sodium cetylsulphate, cetylpyridinium chloride or stearylamine in methylisobutylketone, and the water phase contained various dyes in addition to the inorganic electrolyte. The interfacial tension decreased over the anodic (or cathodic) polarization range, when anionic (or cationic) dyes were added to the water phase, thus indicating the dye adsorption at the interface. The interfacial excess of dye ions was found to increase linearly with the cubic roots of dye concentration and of ionic strength of the water phase. The counterion binding took place at the oil/water interface between anionic (or cationic) dyes and positive (or negative) head groups of surface active agent ions adsorbed at the interface. It was found that the equilibrium constants of binding between anionic dyes and cationic surface active agents at the oil/water interface were of the same order of magnitude as, and a little larger than, those obtained at the water bulk phase.

---

Zusammenfassung An Öl-Wasser-Grenzflächen wurde die Adsorption ionischer Farbstoffe, die Füllerwirkung und die Wechselwirkung zwischen ionischen Farbstoffen und grenzflächenaktiven Verbindungen mit Hilfe der Elektrokapillarität untersucht. Die Ölphase bestand aus einer Lösung von Tetrabutylammoniumchlorid, Natriumcetylsulfat und Cetylpyridiniumchlorid oder Stearylamin in Methylisobutylketon. Die wässerige Phase enthielt verschiedene Farbstoffe und anorganische Elektrolyte. Die Grenzflächenspannung wurde durch anodische (bzw. kathodische) Polarisation erniedrigt, wenn anionischer (bzw. kationischer) Farbstoff zur Wasserphase gegeben wurde. Dies zeigt an, daß Farbstoff an der Grenzfläche adsorbiert wird. Die Grenzflächenkonzentration des Farbstoffions nimmt linear mit der Kubikwurzel der Farbstoffkonzentration und mit der Ionenstärke zu. Als Gegenionen für die anionischen (bzw. kationischen) Farbstoffe an der Grenzfläche wirken die positiven (bzw. negativen) Endgruppen der Tenside, die ebenfalls in der Grenzschicht adsorbiert sind. Die Gleichgewichtskonstanten für die Wechselwirkung zwischen den ionischen Farbstoffen und den grenzflächenaktiven Verbindungen sind an der Öl-Wasser-Grenzfläche von der gleichen Größenordnung bzw. geringfügig größer als in der wässerigen Volumenphase.

---

---

With 12 figures and 2 tables