Structural and optoelectronic properties of antimony tin sulphide thin films deposited by thermal evaporation techniques

Thin films of SnSb₂S₄ have been prepared on glass substrate by using thermal evaporation techniques. The films were annealed in argon gas at low pressure in sealed glass ampoules at 85 °C, 150 °C, 275 °C and 325 °C. XRD of the films reveal that the low temperature annealed films are poly crystalline while the as deposited films and high annealed films are in amorphous states. There is no adequate variation in the photoconductivity response of the amorphous and crystalline phases. The transmittance of the films is low and having no transmittance below 740 nm. The band gap calculated by ellipsometry technique is in the range of 1.82–3.1 eV. The films have n-type conductivity but the film annealed at 325 °C show p-type conductivity.     

Gas Storage in Porous Molecular Materials

Molecules with permanent porosity in the solid state have been studied for decades. Porosity in these systems is governed by intrinsic pore space, as in cages or macrocycles, and extrinsic void space, created through loose, intermolecular solid-state packing. The development of permanently porous molecular materials, especially cages with organic or metal–organic composition, has seen increased interest over the past decade, and as such, incredibly high surface areas have been reported for these solids. Despite this, examples of these materials being explored for gas storage applications are relatively limited. This minireview outlines existing molecular systems that have been investigated for gas storage and highlights strategies that have been used to understand adsorption mechanisms in porous molecular materials.     

Oligoacenes: theoretical prediction of open-shell singlet diradical ground states

A series of oligoacenes from benzene to decacene were studied computationally with DFT and CASSCF methods. In contrast to the common view that acenes are closed-shell systems or may have a triplet ground state, these results offer the first theoretical predictions for the singlet ground state and diradical character for oligoacenes. The nature of the ground states of these molecules arises from the disjoint nature of the NBMOs that are singly occupied in the diradical.     

A proposal for the mechanism-of-action of diazoparaquinone natural products

Treatment of the representative diazoparaquinone prekinamycin dimethyl ether with Bu3SnH/AIBN in aromatic solvents furnishes moderate-to-good yields of formal aryl adducts wherein a molecule of solvent is attached to the carbon (C(11)) previously bearing the diazo function. Substituent studies provide evidence in support of a radical aromatic substitution mechanism, in which radical addition to the diazoparaquinone function generates an intermediate C(11) vinylic radical.     

Initial State Interaction in the (π+,3p) Reaction on N, Ar and Xe

The pion absorption reaction (π^{+,3 p} ) on Ar was studied at pion energies of 70, 118, 162 and 239 MeV, and on N and Xe at 239 MeV. The 3p cross section with a 50 MeV cut on the missing energy is presented. The existence of an initial state interaction (ISI) component to the reaction was investigated. The portion of the 3p cross section assigned to the ISI process is less than one half and at lower energies significantly so. Received: 11 December 1997     

Preparation of I2@SWNTs: synthesis and spectroscopic characterization of I2-loaded SWNTs

X-ray photoelectron spectroscopy (XPS) along with inductively coupled plasma analysis (ICP-AE) and Raman spectroscopy have been used to define the location and to quantify the amount of iodine in HiPco SWNT samples loaded with molecular I(2) via sublimation (I(2)-SWNTs). The exterior-adsorbed I(2) can be removed (as I(-)) by reducing the sample of filled nanotubes with Na(0)/THF or by heating the I(2)-SWNTs to 300 degrees C (without reduction), leaving I(2) contained only within the interior of the SWNTs (I(2)@SWNTs) as proven by XPS. These I(2)@SWNTs contain approximately 25 wt % of I(2) and are stable without the loss of I(2) even after exposure to additional reduction with Na(0)/THF or upon heating to ca. 500 degrees C.     

White CsPbBr3: Characterizing the One-Dimensional Cesium Lead Bromide Polymorph

Inorganic lead halide perovskites have gained immense scientific interest for optoelectronic applications. In this work, we present a one-dimensional polymorph of cesium lead bromide (δ-CsPbBr₃) synthesized through a simple anion-exchange reaction, wherein distorted edge-sharing PbBr₆ octahedra form 1D chains isolated by Cs ions. δ-CsPbBr₃ was characterized by Raman spectroscopy, X-ray diffraction, ²⁰⁷Pb and ¹³³Cs solid-state NMR, and by optical emission and absorption spectroscopies. This non-perovskite material irreversibly transforms into the well-known three-dimensional perovskite phase (γ-CsPbBr₃) upon heating to above 151 °C. The indirect bandgap was determined by absorption measurements and calculation to be 2.9 eV. δ-CsPbBr₃ exhibits broadband yellow photoluminescence with a quantum yield of 3.2 %±0.2 % at room temperature and 95 %±5 % at 77 K, and this emission is attributed to the recombination of self-trapped excitons. This study emphasizes that the metastable δ-CsPbBr₃ may be a persistent, concomitant phase in Cs−Pb-Br-containing materials systems, such as those used in solar cells and LEDs, and it showcases the characterization tools used for its detection.     

Reactive surface micropatterning by wet stamping

Hydrogel stamps are used to reactively micropattern various types of substrates. The method, called reactive wet stamping (r-WETS), is general in nature and overcomes several limitations of conventional soft-lithographic techniques. Illustrative applications of r-WETS in surface wettability modification, deposition of metallic microstructures, preparation of supports for electrostatic self-assembly, and multistep reactive patterning are discussed.     

A study of the reaction 2H(π±, p)X

We have studied the excitation function of the reaction ²H(π^±, p)X at a fixed proton angle of 90° for several fixed proton momenta of the detected proton as a function of the incident pion energy. No signal was found for a previous candidate for a dibaryon resonance around a mass of 2.23 GeV. The general trend of the data is reproduced by a multiple scattering theory