Effect of Enzyme Modification of Corn Grits on their Properties as an Adsorbent in a Skarstrom Pressure Swing Cycle Dryer

Corn grits have been tested as a desiccant in a pressure swing adsorption (PSA) system to produce dry air. Two sizes of unmodified corn grits were tested in the PSA system: 2.16 and 0.978 mm in diameter, which dried moist air to dew points of –42°C and –69°C, respectively. A modification technology has been developed for the corn grits that gives an increase in the operational adsorptive capacity in a pressure swing adsorption system, so that they remove as much moisture from air as molecular sieves at the same conditions. After modification, 2.16 mm corn grits dry moist air to a –56°C dew point and the 0.978 mm corn grits dry air to a –80°C dew point. The modification process creates surface modifications on the corn grits apparently making more adsorption sites easily available. The modification procedure increases the specific surface area of the grits and possibly decreases the crystallinity, which would make more hydroxyl groups available for adsorption of water. Possible applications of using corn grits in the pressure swing adsorption system include industrial gas dryers, sorptive cooling air conditioners, and recycling equipment for industrial solvents.     

Isomers of C20: an energy profile III

Semiempirical calculations, at the PM3 level provided within the Winmopac v2.0 software package, are used to geometrically optimize and determine the absolute energies (heats of formation) of a variety of C(20) isomers that are predicted to exist in and around the ring and cage isomers. Using the optimized Cartesian coordinates for the ring and the cage isomers, a saddle-point calculation was performed. The resulting energy profile, consisting of a series of peaks and valleys, is used as a starting point for the identification and location of fifteen additional isomers of C(20) that are predicted to be energetically stable, both via geometry optimizations and force constant analysis. These additional isomers were subsequently determined to lie adjacent to one another on the potential surface and establish a step-wise transformation between the ring and the cage. Transition-state optimization of the Cartesian coordinates at the saddle point between adjacent isomers was performed to quantify the energy of the transition state. The step-wise process from one isomer to another, which extends out over the three-dimensional surface, is predicted to require approximately 15% less energy than that of the direct, two-dimensional transformation predicted in the bowl-cage profile. However, the net atomic rearrangement for the step-wise process is about four times greater than that of the direct process. Although less in energy, the amount of atomic rearrangement in the step-wise process would make the occurrence of such a route prohibitive. Utilizing the direct distance separating the three primary isomers (ring, bowl, cage), the method of triangulation is performed to quantitatively position other C(20) structures on the potential surface, relative to the ring, bowl, and cage isomers.     

A proposal for the mechanism-of-action of diazoparaquinone natural products

Treatment of the representative diazoparaquinone prekinamycin dimethyl ether with Bu3SnH/AIBN in aromatic solvents furnishes moderate-to-good yields of formal aryl adducts wherein a molecule of solvent is attached to the carbon (C(11)) previously bearing the diazo function. Substituent studies provide evidence in support of a radical aromatic substitution mechanism, in which radical addition to the diazoparaquinone function generates an intermediate C(11) vinylic radical.     

Exponential distributions on semigroups

Three fundamental characterizations of the standard exponential distribution on [0, ) are the remaining life, memoryless and constant failure properties. Analogs of these properties are studied for distributions on a class of semigroups in which the semigroup operation replaces addition, a compatible partial order replaces the ordinary order, and a left-invariant measure replaces Lebesgue measure. Partial characterizations of exponential distributions on such semigroups are obtained and the semigroup formulation provides new characterizations of certain aging properties studied in reliability-increasing failure rate, new better than used, and increasing failure rate average.     

Preparation of ordered large pore SBA-15 silica functionalized with aminopropyl groups through one-pot synthesis

Highly ordered large pore SBA-15 silica functionalized with up to 16% aminopropyl groups, which gave high catalytic activity and selectivity toward flavanone synthesis through aldol condensation and subsequent intramolecular Michael addition of benzaldehyde and 2'-hydroxyacetophenone, was synthesized for the first time via co-condensation of tetraethylorthosilicate (TEOS) and 3-aminopropyltriethoxysilane (APTES) using an amphiphilic block copolymer as the structure-directing agent.     

Micropatterning chemical oscillations: waves, autofocusing, and symmetry breaking

Arrays of chemical oscillators are micropatterned by Wet Stamping. The technique is used to demonstrate that chemical waves can be initiated and controlled in oscillatory systems and that such waves can give rise to phenomena not observed in excitable media. Interoscillator coupling and synchronization, kinetic autofocusing, and twist-symmetry breaking are a consequence of the dependence of the oscillation phase on the local concentrations of reagents and on systems' geometry. Conditions under which a generic oscillatory system would exhibit such behaviors are determined.     

Self-assembling a molecular pegboard

This paper describes the design, construction, and application of a self-assembled, chemically addressable DNA nanogrid composed of DNA tiles of nanometer dimensions. This self-assembled structure permits precise placement of molecules at predetermined locations on a "molecular pegboard". We used the indexed DNA nanogrids to identify single molecules of DNA that hybridize at particular locations.     

Electrocapillary at contact: potential-dependent adhesion between a gold electrode and a mica surface

Using the electrochemical surface forces apparatus, we investigated adhesion (from pull-off measurements) between gold and mica as the potential of the gold surface was changed externally. Measurements were performed at different concentrations of KClO(4) in a potential window where the gold electrode is ideally polarizable. At applied potentials where the gold-mica interactions are repulsive, we obtain double layer forces that are predictable by the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory of colloid stability but deviate from the theory at short range. At applied potentials where the gold-mica interactions are attractive, we observed a very strong dependence of adhesion on the applied potential, a result that cannot be directly related to DLVO theory. We show, however, that an approach based on electrocapillary thermodynamics can be employed to model the potential dependence of adhesion seen in our measurements. This electrocapillary approach presents evidence of charging at the gold-mica interface and stresses the relation between the charge within and outside of the contact area.     

Toward the development of new photolabile protecting groups that can rapidly release bioactive compounds upon photolysis with visible light

The synthesis and characterization of a new photolabile protecting group (caging group) for carboxylic acids, the 2-(dimethylamino)-5-nitrophenyl (DANP) group, is described. This compound has a major absorption band in the visible wavelength region with a maximum near 400 nm (epsilon400 = 9077 M(-1) cm(-1) at pH 7.4 and 21 degrees C). The caging group is attached through an ester linkage to the carboxyl functionality of beta-alanine, which activates the inhibitory glycine receptor in the mammalian central nervous system. Such caged compounds play an important role in transient kinetic investigations of fast cellular processes. Upon photolysis of DANP-caged beta-alanine, the caging group is released within 5 micros. Quantum yields of 0.03 and 0.002 were obtained in the UV region (308 and 360 nm) and the visible region (450 nm), respectively. Laser-pulse photolysis experiments, using 337 or 360 nm light, were performed with the caged compound equilibrated with HEK 293 cells transiently transfected with cDNA encoding the alpha1 homomeric, wild-type glycine receptor. The experiments demonstrated that neither DANP-caged beta-alanine nor its byproducts inhibit or activate the glycine receptors on the cell surface. Under physiological conditions, the DANP-caged beta-alanine is water-soluble and stable and can be used for transient kinetic measurements.