Comparative studies of various run buffers for chiral capillary electrophoresis using chiral crown ether as a chiral selector

In the capillary electrophoretic separation of primary amine enantiomers using (+)-(18-crown-6)-tetracarboxylic acid (18C6H4) as a chiral selector, the presence of run buffer constituents such as tris(hydroxymethyl)aminomethane (Tris) or Na+ competing with analytes for 18C6H4, diminishes the effectiveness of 18C6H4. In order to determine appropriate buffer systems for 18C6H4, various run buffer cationic components including Tris, 1,3-bis[tris(hydroxymethyl)methylamino]propane, bis(2-hydroxyethyl)iminotris(hydroxymethyl)methane, triethanolamine, tetramethylammonium, and Na+ were compared. Quantitative studies of the effects of the competitive constituents were carried out by measuring the electrophoretic mobilities of histidine as a function of the 18C6H4 concentration. We also derived a simple equation to estimate the optimal chiral selector concentration for a maximum mobility difference in the presence of a competitive inhibitor.     

Analysis of dimensionally stable copolyimide with a low‐level residual stress

Copolyimide thin film, which has low‐level stress and stress relaxation induced by water sorption, was characterized for potential applications as an encapsulant, a stress‐relief buffer, and in interlayer dielectrics. The polyimides examined were poly(p‐phenylene pyromellitimide) (PMDA‐PDA) and poly(p‐phenylene biphenyltetracarboximide) (BPDA‐PDA) as well as their random copolyimides with various compositions. These copolyimide films exhibited good combinations of physical and mechanical properties with low thermal expansion coefficients, residual stress, and moisture‐induced stress–relaxation behavior by appropriately selecting the ratios of the dianhydride component. For these polyimides, the residual stress increased in the range of −8.1–7.5 MPa, whereas stress relaxation induced by water uptake decreased in the range of 10.3–4.7 MPa with increasing BPDA contents, respectively. The major factor in determining the magnitude of the stress behavior induced by both the thermal mismatch and water uptake in films should be the morphological factors such as chain rigidity, chain orientation, crystallinity, and microvoids. Their morphological structures were examined by wide angle X‐ray diffraction and a prism coupler, and the thermal properties were measured using a dynamic mechanical thermal analyzer as well as thermomechanical analysis. Overall, the candidate for the low level stress buffer application from the PMDA/BPDA‐PDA copolyimide was the 30/70 (= PMDA/BPDA in molar ratio) copolyimide. This copolyimide showed no residual stress after curing at 400 °C and relatively insensitive stress relaxation to ambient humidity. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 796–810, 2001     

Hypoxanthine,xanthine and theobromine complexes with palladium(II) and platinum(IV) chlorides

Summary Complexes of the general types Pd(L)(LH)Cl (LH=hxH, xnH, or tbH) and Pt(L)(LH)Cl₃ (LH=hxH, or xnH) are formed by boiling under reflux 21 molar mixtures of hypoxanthine (hxH), xanthine (xnH) or theobromine (tbH) and PdCl₂ or PtCl₄ in ethanol-triethyl orthoformate. These complexes appear to be linear chain polymeric species, characterized by single monoanionic L^– ligands bridging between adjacent Pd²⁺ or Pt⁴⁺ ions. Inclusion of one terminal neutral LH and one terminal chloro-ligand completes the coordination sphere in the square-planar Pd²⁺ complexes, while the Pt⁴⁺ complexes aretrans-octahedral, involving three terminal chloro and one terminal LH ligand per platinum. The possible binding sites of the bidentate bridging L^– and the unidentate terminal LH are discussed.     

Application of BGO detector to monitor in situ16N concentration in a reactor pool

A high efficiency BGO detecting system coupled to a coolant pumping device was used to monitor on-line the 6.13 MeV high energy gamma-ray, which is emitted from the 7.1 s half-life of¹⁶N activated by¹⁶O(n, p) reaction in a nuclear reactor. The system has been demonstrated effectively to monitor the real-time reactor power level as well as the space-time neutron flux distribution in reactor coolant.     

Improved accuracy for Raman spectroscopic determination of polyethylene property by optimization of measurement temperature and elucidation of its origin by multiple perturbation two-dimensional correlation spectroscopy

A novel strategy is demonstrated to improve the accuracy for determination of polyethylene (PE) density using Raman spectroscopy by optimizing the temperature of sample measurement. Spectral features associated with the conformation change of the polymer induced by temperature may provide valuable information to quantify important polymer properties such as density. To evaluate possible existence of an optimal temperature providing improved quantitative accuracy, Raman spectra of PE pellets with different densities were collected at eight different temperatures from 30 to 100 °C at 10 °C intervals. Using the spectral datasets collected at each temperature, partial least squares (PLS) models were developed using the reference PE density values determined by a standard density gradient method at 23 °C. Interestingly, the most accurate determination of density was realized at 70 °C. Multiple perturbation two-dimensional (MP2D) correlation analysis and differential scanning calorimetry (DSC) were used to examine the origin of improved accuracy at 70 °C. From these analyses, the pre-melt behavior of the PE samples was identified below their melting temperatures. Structural variations induced at the pre-melt stages enhance Raman spectral selectivity among the samples, thereby providing more accurate determination of PE density. The MP2D correlation analysis revealed the unforeseen thermal behavior of PE samples and successfully explained the improved accuracy at 70 °C.     

A versatile palladium catalyst system for Suzuki-Miyaura coupling of alkenyl tosylates and mesylates

A general and effective palladium system for Suzuki-Miyaura coupling of alkenyl electrophiles under mild reaction conditions is reported. With the Pd(OAc)(2)/CM-phos system, a variety of alkenyl tosylates are coupled well with ArB(OH)(2). Moreover, the first successful examples of using alkenyl mesylates in alkenylation are also described.     

Catalytic conversion of lactic acid into propylene glycol over various metals supported on silica

Catalytic hydrogenation of lactic acid to propylene glycol was performed over various metals (Ag, Co, Cu, Ni, Pt, and Ru) supported on silica prepared by an incipient wetness impregnation method. The loading amount of each metal was 5 wt%. Crystallinity of the synthesized catalysts was investigated by X-ray diffraction (XRD), and the BET method was utilized to examine the surface area. Pore volume and pore size of catalysts were determined using BJH analysis of the N₂ adsorption isotherm. Particle sizes of various metals were determined from transmission electron microscopy (TEM) images. The catalytic activity was found to be strongly dependent on the supported metal. Among catalysts tested, Ru/SiO₂ showed the highest propylene glycol yield. The yield of propylene glycol increased with pressure, and the highest yield was achieved at 130 °C.     

Analysis of the variations in IL-28RA gene and their association with allergic rhinitis

IL-28RA is one of the important candidate genes for complex trait of genetic diseases, but there is no published information of the genetic variation in this gene. We scanned the seven exons and their boundary introns sequence of IL-28RA including the promoter regions to analyze genetic variation sites, and identified eighteen single nucleotide polymorphisms (SNPs) and two variation sites. We chose seven SNPs (g.-1193 A>C, g.-30 C>T, g.17654 C>T, g.27798 A>G, g.31265 C>T, g.31911 C>T and g.32349 G>A) of them for large sample size genotyping, and assessed the association of genotype and allele frequencies of these SNPs between allergic rhinitis patients and non-allergic rhinitis controls. We also compared the genotype frequencies between Korean controls and Han Chinese control or Korean Chinese control. We investigated the frequencies of haplotype constructed by these SNPs between allergic rhinitis patients and non-allergic rhinitis controls. Our results suggested that the g.32349 G>A polymorphism of IL-28RA might be associated with susceptibility to allergic rhinitis (P=0.032), but seems to have no relationship with serum total IgE levels. The haplotype frequencies by these SNPs also show significant association between controls and allergic rhinitis patients.