A novel oxygen and/or carbon dioxide-sensitive optical transducer

A novel oxygen (O(2)) and/or carbon dioxide (CO(2))-sensitive transducer for the measurement of both gaseous O(2) and CO(2) over the concentration ranges of O(2), 0-100% and CO(2), 0-10% has been described employing a solution of 10.6 muM fluorescein (FL) and 190 muM potassium hydroxide in a solvent mixtures of 1:1 (v/v) N,N'-diethylaniline (DEA) and N,N-dimethylformamide. Increasing O(2) concentrations cause the absorbance of the solution at a wavelength of 400 nm to increase owing to a contact charge transfer reaction existing between O(2) and DEA molecules, and increasing CO(2) concentrations produce a non-linear fall in absorbance at 520 nm as the colour of FL changes from its orange dianion form to the colourless neutral, lactonic form. Both processes are independent of each other and reversible. The response to changes in O(2) concentrations is in good agreement with Beer-Lambert's law and the response to changes in CO(2) concentrations in non-linear. A fibre optic sensing system based on this solvent-dye solution has been set up for continuous and reversible determination of both gaseous O(2) and CO(2). Possible applications include environmental and physiological monitoring of O(2) over the ranges of 0-100% and CO(2), 0-10%.     

An organic-phase optical phenol biosensor coupling enzymatic oxidation with chemical reduction

This paper presents a recycle amplification optical biosensor to monitor phenol in hydrophobic organic solvents. Tyrosinase was first immobilised by entrapping it in a copolymer membrane of poly(vinyl alcohol)-hydroxyethyl carboxymethylcellulose doped with octadecylsilica particles. The biosensor was then constructed by co-mixing small particles of the immobilised tyrosinase with the adduct of L-ascorbic acid-poly(vinyl alcohol) (AsA-PVA) in conjunction with an optical oxygen transducer. The biosensor was characterised by its amplifying response to phenol, stable biocatalytic activity of entrapped-tyrosinase, free of interference from o-quinone polymerisation, and large water buffer capacity in hydrophobic organic solvents. The working range of the biosensor to phenol was 0.08-40 mmol dm(-3) in the flow mode. The response times (95%) of the biosensor were 4-7 min for phenol. The operational lifetime was more than 40 assays and the shelf lifetime of the biosensor was longer than 3 months. The biosensor has been successfully applied to quantify the phenol contents in some commercial ointment samples.     

Modeling of the Permeate Flux during Microfiltration of BSA-Adsorbed Microspheres in a Stirred Cell

A study on the variation of the permeate flux was performed in a stirred cell charged with microspheres, to investigate the effects of the stirrer speeds (300, 400, and 600 rpm) and the BSA concentration (0.1, 0.2, 0.4, and 0.8 g/L) under constant pressure. The permeate flux increased over time before the saturation point, but it began to decrease after that point. An increase of the BSA concentration and the stirrer speed resulted in the rapid increase of the permeate flux. This is contrary to the observation of the conventional filtration experiments using a stirred cell. A resistance-in-series model was employed for the modeling of the permeate flux. The cake resistance (R(c), induced by the concentration polarization of microspheres) and the fouling resistance (R(f), induced by the adsorption of BSA inside the membrane pore) must be considered simultaneously for the modeling. These modeling results were in good agreement with the experimental data. These can be applied to the special system considering both R(c) and R(f) as well as the general filtration systems using a stirred cell. Copyright 2000 Academic Press.     

Unusually stable molecular capsule formation of a tetraphenyleneurea cavitand

An unusually stable molecular capsule was formed by heating phenyleneurea-spanned resorcinarene cavitand with 4-methyl-N-p-tolylbenzamide. The molecular capsule behaved as a discrete molecular entity showing a cylindrical D(4d) structure and showed no guest exchange in toluene-d(8) even at 100 degrees C. [structure: see text]     

Independent exponential feeding of glycerol and methanol for fed-batch culture of recombinant Hansenula polymorpha DL-1

As a novel feeding strategy for aptomizing human epidermal growth factor (hEGF) production with a recombinant Hansenula polymorpha DL-1 using the methanol oxidase (MOX) promoter in H. polymorpha DL-1, independent exponential feeding of two substrates was used. A simple kinetic model considering the cell growth on two substrates was established and used to calculate the respective feeding rates of glycerol and methanol. In the fedbatch culture with methanol-only feeding, the optimal set point of specific growth rate on methanol was found to be 0.10 h⁻¹. When the fed-batch cultures were conducted by the independent feeding of glycerol and methanol, the actual specific growth rate on glycerol and methanol was slightly lower than the set point of specific growth rate. By the uncoupled feeding of glycerol and methanol the volumetric productivity of hEGF increased from 6.4 to 8.0 mg/(L·h), compared with methanol-only feeding.     

Synthesis of some heterocyclic systems from nucleophilic substitution reactions with η6-o-dichlorobenzene-η5-cyclopentadienyliron hexafluorophosphate

A method for the synthesis of heterocylic systems related to 9,10-dihydroanthracene with two hetero-atoms at the 9,10-positions is described. It involves the nucleophilic substitution reaction of η⁶-o-dichlorobenzene-η⁵-cyclopentadienyliron hexafluorophosphate with two nucleophilic groups (OH, SH and/or NH₂) located in the 1,2-positions of a benzene ring to give a cyclopentadienyliron complexed heterocycle. Upon pyrolytic sublimation of the complex, the free heterocyclic compound is then obtained.     

A novel in-plane passive microfluidic mixer with modified Tesla structures

An innovative in-plane passive micromixer using modified Tesla structures, which are used as passive valves, has been designed, simulated, fabricated and successfully characterized in this paper. Simulation and experimental results of the developed novel micromixer have shown excellent mixing performance over a wide range of flow conditions in the micro scale. The micromixer realized in this work has achieved even better mixing performance at a higher flow rate, and its pressure drop is less than 10 KPa at the flow rate of 100 microl min(-1). This micromixer shows characteristics similar to Taylor dispersion, with contributions from both diffusion and convection. The mixer has a diffusion domain region at low flow rate, but it moves to a convection domain region at high flow rate. Due to the simple in-plane structure of the novel micromixer explored in this work, the mixer can be easily realized and integrated with on-chip microfluidic devices and micro total analysis systems (micro-TAS).     

Highly charging of nanoparticles through electrospray of nanoparticle suspension

Patterned deposition of nanoparticles is a prerequisite for the application of unique properties of nanoparticles in future nanodevices. Recent development of nanoxerography requires highly charged aerosol nanoparticles to avoid noise deposition due to random Brownian motion. However, it has been known that it is difficult to charge aerosol nanoparticles with more than two elementary charges. The goal of this work is to develop a simple technique for obtaining highly charged monodisperse aerosol nanoparticles by means of electrospray of colloidal suspension. Highly charged aerosol nanoparticles were produced by electrospraying (ES) and drying colloidal suspensions of monodisperse gold nanoparticles. Size and charge distributions of the resultant particles were measured. We demonstrate that this method successfully charges monodisperse nanoparticles very highly, e.g., 122 elementary charges for 25.0 nm, 23.5 for 10.5 nm, and 4.6 for 4.2 nm. The method described here constitutes a convenient, reliable, and continuous tool for preparing highly charged aerosol nanoparticles from suspensions of nanoparticles produced by either wet chemistry or gas-phase methods.     

Synthesis and reactivity of 1,2-bis(chlorodimethylgermyl)carborane and 1,2-bis(bromodimethylstannyl)carborane

The 1,2-bis(chlorogermyl)- (1) and 1,2-bis(bromostannyl)carborane (2) have been prepared by the reaction of dilithio-o-carborane with Me(2)GeCl(2) and Me(2)SnBr(2), respectively. Compounds 1 and 2 are found to be good precursors for the synthesis of a variety of cyclization compounds. The Wurtz-type coupling reaction of 1 and 2 using sodium metal afforded the four-membered digerma compound 3 and five-membered tristanna compound 4, respectively. The salt elimination reactions of 1 and 2 using Li(2)N(t)Bu and Li(2)PC(6)H(5) afforded the cyclic products [structure: see text]. The 1,2-bis(dimethylgermyl)carborane 9 and 1,2-bis(dimethylstannyl)carborane 10 were prepared by the reaction of 1 and 2 with sodium cyanoborohydride. The reactions of 9 and 10 with Pd(PPh(3))(4) afforded the bis(germyl)palladium 12 and bis(stannyl)palladium 13 complexes, respectively.