Photocatalytic Activities for Water Splitting of RuO_2-loaded MGa_2O_4（M=Zn,Ni） with d~（10） Configuration

MGa2O4(M=Zn,Ni) rods with similar crystallinity and BET surface area were prepared via a facile template-engaged reaction.The photocatalytic activities for water splitting of RuO2-loaded MGa2O4(M=Zn,Ni) were investigated under high-pressure Hg lamp.RuO2-loaded ZnGa2O4 catalyst exhibited much higher photocatalytic activity than RuO2-loaded NiGa2O4.Factors affecting the photocatalytic activities of RuO2-loaded MGa2O4(M=Zn,Ni) were discussed.It was suggested that the electronic structure of oxide semiconductor was a predominant factor of the photocatalytic behavior for RuO2-loaded MGa2O4(M=Zn,Ni).     

p区金属氧化物Ga2O3和Sb2O3光催化降解盐酸四环素性能差异

对沉淀法合成的p区金属氧化物Ga₂O₃和Sb₂O₃紫外光光催化降解盐酸四环素的性能进行了研究,讨论了制备条件对光催化性能的影响。最佳制备条件下得到的Ga₂O₃-900和Sb₂O₃-500样品光催化性能存在巨大差异,通过X射线粉末衍射、傅里叶红外光谱、N2吸附-脱附测试、荧光光谱、拉曼光谱、电化学分析及活性物种捕获实验等对样品进行分析,研究二者光催化降解盐酸四环素的机理,揭示影响光催化性能差异的本质因素。结果表明,Ga₂O₃和Sb₂O₃光催化性能差异主要归结于二者不同的电子和晶体结构、表面所含羟基数量及光催化降解机理。     

Point-like source solutions in modified gravity with a critical acceleration

We consider equations of modified gravity with critical accelerations and find its solutions for the point-like source by suggesting the appropriate symmetry of metrics in empty space-time.     

ZnO–SnO2 branch–stem nanowires based on a two-step process: Synthesis and sensing capability

ZnO–SnO₂ branch–stem nanostructures were realized on a basis of a two-step process. In step 1, SnO₂-stem nanowires were synthesized. In step 2, ZnO-branch nanowires were successfully grown on the SnO₂-stem nanowires through a simple evaporation technique. We have pre-deposited thin Au layers on the surface of SnO₂ nanowire stems and subsequently evaporated Zn powders on the nanowires. The ZnO branches, which sprouted from the SnO₂ stems, had diameters in a range of 30–35 nm. As-synthesized branches were of single crystalline hexagonal ZnO structures. Since the branch tips were comprised of Au-containing nanoparticles, the Au-catalyzed vapor–liquid–solid growth mechanism was more likely to control the growth process of the ZnO branches. To test a potential use of ZnO–SnO₂ branch–stem nanostructures in chemical gas sensors, their sensing performances with respect to NO₂ gas were investigated, showing the promising potential in chemical gas sensors.     

Readily Accessible and Predictable Naphthalene‐Based Two‐Photon Fluorophore with Full Visible‐Color Coverage

Herein we report 22 acedan‐derived, two‐photon fluorophores with synthetic feasibility and full coverage of visible wavelength emission. The emission wavelengths were predicted by computational analysis, which enabled us to visualize multicolor images by two‐photon excitation with single wavelength, and to design a turn‐on, two‐photon fluorescence sensor for endogenous H₂O₂ in Raw 264.7 macrophage and rat brain hippocampus ex vivo.     

Monolayer Co3O4 Inverse Opals as Multifunctional Sensors for Volatile Organic Compounds

Monolayers of periodic porous Co₃O₄ inverse opal (IO) thin films for gas‐sensor applications were prepared by transferring cobalt‐solution‐dipped polystyrene (PS) monolayers onto sensor substrates and subsequent removal of the PS template by heat treatment. Monolayer Co₃O₄ IO thin films having periodic pores (d≈500 nm) showed a high response of 112.9 to 5 ppm C₂H₅OH at 200 °C with low cross‐responses to other interfering gases. Moreover, the selective detection of xylene and methyl benzenes (xylene+toluene) could be achieved simply by tuning the sensor temperature to 250 and 275 °C, respectively, so that multiple gases can be detected with a single chemiresistor. Unprecedentedly high ethanol response and temperature‐modulated control of selectivity with respect to ethanol, xylene, and methyl benzenes were attributed to the highly chemiresistive IO nanoarchitecture and to the tuned catalytic promotion of different gas‐sensing reactions, respectively. These well‐ordered porous nanostructures could have potential in the field of high‐performance gas sensors based on p‐type oxide semiconductors.     

Room-temperature and solution-processed vanadium oxide buffer layer for efficient charge injection in bottom-contact organic field-effect transistors

We introduce a room temperature and solution-processible vanadium oxide (VO_x) buffer layer beneath Au source/drain electrodes for bottom-contact (BC) organic field-effect transistors (OFETs). The OFETs with the VO_x buffer layer exhibited higher mobility and lower threshold voltages than the devices without a buffer layer. The hole mobility with VO_x was over 0.11 cm²/V with the BC geometry with a short channel length (10 μm), even without a surface treatment on SiO₂. The channel width normalized contact resistance was decreased from 98 kΩ cm to 23 kΩ cm with VO_x. The improved mobility and the reduced contact resistance were attributed to the enhanced continuity of pentacene grains, and the increased work function and adhesion of the Au electrodes using the VO_x buffer layer.     

TREN (Tris(2-aminoethyl)amine): an effective scaffold for the assembly of triple helical collagen mimetic structures

A new scaffold, TREN-(suc-OH)(3) where TREN is tris(2-aminoethyl)amine and suc is the succinic acid spacers, was incorporated to assemble triple helices composed of Gly-Nleu-Pro sequences (Nleu denotes N-isobutylglycine). Extensive biophysical studies which include denaturation studies, CD and NMR spectroscopy, and molecular modeling demonstrated that TREN-[suc-(Gly-Nleu-Pro)(n)-NH(2)](3) (n = 5 and 6) form stable triple helical structures in solution. A comparative analysis of TREN-assembled and KTA-assembled collagen mimetics (KTA denotes Kemp triacid, 1,3,5-trimethylcyclohexane-1,3,5-tricarboxylic acid) indicates that the flexibility of the TREN scaffold is superior to the KTA scaffold in inducing triple helicity. This effect most likely arises from the flexibility of the TREN scaffold which allows the three peptide chains to adjust their register for a tighter triple helical packing.