Phosphorylation of phospholipase D1 and the modulation of its interaction with RhoA by cAMP-dependent protein kinase

Agents that elevate cellular cAMP are known to inhibit the activation of phospholipase D (PLD). We investigated whether PLD can be phosphorylated by cAMP-dependent protein kinase (PKA) and PKA-mediated phosphorylation affects the interaction between PLD and RhoA, a membrane regulator of PLD. PLD1, but not PLD2 was found to be phosphorylated in vivo by the treatment of dibutyryl cAMP (dbcAMP) and in vitro by PKA. PKA inhibitor (KT5720) abolished the dbcAMP-induced phosphorylation of PLD1, but dibutyryl cGMP (dbcGMP) failed to phosphorylate PLD1. The association between PLD1 and Val14RhoA in an immunoprecipitation assay was abolished by both dbcAMP and dbcGMP. Moreover, RhoA but not PLD1 was dissociated from the membrane to the cytosolic fraction in dbcAMP-treated cells. These results suggest that both PLD1 and RhoA are phosphorylated by PKA and the interaction between PLD1 and RhoA is inhibited by the phosphorylation of RhoA rather than by the phosphorylation of PLD1.     

Prediction of chromatographic parameters for some anilines by molecular connectivity

Summary The possible relation existing between R_F values obtained by thin-layer chromatography for a group of anilines with connectivity indices proposed by Kier and Hall has been studied. Using multivariable regression the corresponding connectivity functions, selected for their respective correlation coefficients, standard deviations, Snedecor's F and Student's t were obtained. Regression analysis of the connectivity functions gives a correct prediction of the experimental elution sequence for this group of substances on silica gel stationary phases and various mobile phases of different polarity. The corresponding random and stability studies of the different prediction models selected were carried out, showing good stability and null randomness in all cases.     

In situ disorder-order transformation in synthetic gallosilicate zeolites with the NAT topology

Here, we report that synthetic gallosilicate molecular sieves with the NAT topology and Si/Ga ratios close to but slightly higher than 1.50 undergo an in situ transformation under their crystallization conditions. The materials have been studied ex situ by using powder X-ray diffraction, elemental and thermal analyses, and multinuclear MAS NMR. The transformation is characterized by a change in the distribution of Si and Ga of the NAT framework, from a quite (but not completely) disordered phase to a very highly (but not completely) ordered one, accompanied by a change from tetragonal to orthorhombic symmetry. During most of the solution-mediated transformation, no noticeable signs of fresh precipitation, phase segregation, or changes in the chemical composition are detected. Intermediate materials show variations in the degree of Si-Ga ordering and orthorhombic distortion and are not physical mixtures of the disordered and ordered phases. Ab initio calculations strongly suggest a preferential siting of Si in the tetrahedral sites involved in a smaller number of 4-rings in the NAT topology (i.e., the low multiplicity site). The cost of violations of Loewenstein's rule has also been calculated. For this topology and chemical composition the preferential siting and Loewenstein's rule drive together the system to the ordered configuration. A Monte Carlo sampling procedure affords a reasonable model for the initial, mainly disordered state, which fits well within the experimental disorder-order series.     

Biomedical significance of endothelial cell specific growth factor, angiopoietin

Until recently, vascular endothelial growth factor (VEGF) was the only growth factor proven to be specific and critical for blood vessel formation. Other long-known factors, such as the fibroblast growth factors (FGFs), platelet-derived growth factor, or transforming growth factor-beta, had profound effects in endothelial cells. But such factors were nonspecific, in that they could act on many other cells, and it seemed unlikely that these growth factors would be effective targets for treatment of endothelial cell diseases. A recently discovered endothelial cell specific growth factor, angiopoietin, has greatly contributed to our understanding of the development, physiology, and pathology of endothelial cells (Davis et al., 1996; Yancopoulos et al., 2000). The recent studies that identified and characterized the physiological and pathological roles of angiopoietin have allowed us to widen and deepen our knowledge about blood vessel formation and vascular endothelial function. Therefore, in this review, we describe the biomedical significance of these endothelial cell growth factors, the angiopoietins, in the vascular system under normal and pathological states.     

PHOTOCYCLOADDITION REACTION OF 5,7-DIMETHOXYCOUMARIN TO THYMIDINE

Abstract— The photocycloaddition reaction of 5,7-dimethoxycoumarin to thymidine on direct irradiation (λ > 300 nm) is studied as a model for photosensitization reaction of furocoumarins. The major photoadducts were isolated by silica gel column and gel permeation chromatography. Each component of the photoadducts was further separated by reverse phase, paired-ion high performance liquid chromatography. The structure of these photoproducts isolated is consistent with 1:1 C₄-cycloadducts in accordance with characteristics of their UV, IR, NMR and mass spectra and elemental analysis data. The stereochemistry of each isomer was studied by Fourier transform NMR, UV and IR spectra. The fraction C has the anti head-to-tail configuration and the fraction D has the configuration of anti head-to-head. The fractions A and B probably have the syn configuration.     

Determination of Glimepiride in Human Plasma by LC-MS-MS and Comparison of Sample Preparation Methods for Glimepiride

A sensitive and selective method for quantitation of glimepiride in human plasma was established using liquid chromatography-electrospray ionization tandem mass spectrometry. Three different methods for the sample preparation of glimepiride and an internal standard were investigated (liquid-liquid extraction, solid-phase extraction and protein precipitation). Glipizide was used as an internal standard. Compounds were separated on a C₁₈ column with 80% acetonitrile and 20% deionized water (adjusted to pH 3.5 with acetic acid), as mobile phase at a flow rate of 200 L min^–1. By use of multiple reaction monitoring mode in MS-MS with liquid-liquid extraction and solid-phase extraction, glimepiride and glipizide were detected without severe interference from the human plasma matrix. Glimepiride produced a protonated precursor ion ([M+H]⁺) at m/z 491 and a corresponding product ion at m/z 352, and the internal standard produced a protonated precursor ion ([M+H]⁺) at m/z 446 and a corresponding product ion at m/z 321. The limit of quantitation was 0.1 ng mL^–1, 0.5 ng mL^–1 and 1.0 ng mL^–1 when using liquid-liquid extraction, solid-phase extraction and protein precipitation, respectively. The validation, reproducibility, stability, and recovery of the different sample preparation methods were comparable and all the methods gave reliable results. The method has been successfully applied to pharmacokinetic study of glimepiride in human plasma.     

A serpentine laminating micromixer combining splitting/recombination and advection

Mixing enhancement has drawn great attention from designers of micromixers, since the flow in a microchannel is usually characterized by a low Reynolds number (Re) which makes the mixing quite a difficult task to accomplish. In this paper, a novel integrated efficient micromixer named serpentine laminating micromixer (SLM) has been designed, simulated, fabricated and fully characterized. In the SLM, a high level of efficient mixing can be achieved by combining two general chaotic mixing mechanisms: splitting/recombination and chaotic advection. The splitting and recombination (in other terms, lamination) mechanism is obtained by the successive arrangement of "F"-shape mixing units in two layers. The advection is induced by the overall three-dimensional serpentine path of the microchannel. The SLM was realized by SU-8 photolithography, nickel electroplating, injection molding and thermal bonding. Mixing performance of the SLM was fully characterized numerically and experimentally. The numerical mixing simulations show that the advection acts favorably to realize the ideal vertical lamination of fluid flow. The mixing experiments based on an average mixing color intensity change of phenolphthalein show a high level of mixing performance was obtained with the SLM. Numerical and experimental results confirm that efficient mixing is successfully achieved from the SLM over the wide range of Re. Due to the simple and mass producible geometry of the efficient micromixer, SLM proposed in this study, the SLM can be easily applied to integrated microfluidic systems, such as micro-total-analysis-systems or lab-on-a-chip systems.     

The quenching of CdSe quantum dots photoluminescence by gold nanoparticles in solution

The photoluminescence (PL) of CdSe quantum dots (QD) in aqueous media has been studied in the presence of gold nanoparticles (NP) with different shapes. The steady state PL intensity of CdSe QD (1.5-2 nm in size) is quenched in the presence of gold NP. Picosecond bleach recovery and nanosecond time-resolved luminescence measurements show a faster bleach recovery and decrease in the lifetime of the emitting states of CdSe QD in the presence of quenchers. Surfactant-capped gold nanorods (NR) with aspect ratio of 3 and surfactant-capped and citrate-capped nanospheres (NS) of 12 nm diameter were used as quenchers in order to study the effect of shape and surface charge on the quenching rates. The Stern-Volmer kinetics model is used to examine the observed quenching behavior as a function of the quencher concentration. It was found that the quenching rate of NR is more than 1000 times stronger than that of NS with the same capping material. We also found that the quenching rate decreases as the length of the NR decreases, although the overlap between the CdSe emission and the NR absorption increases. This suggests that the quenching is a result of electron transfer rather than long-range (Forster-type) energy transfer processes. The quenching was attributed to the transfer of electron with energies below the Fermi level of gold to the trap holes of CdSe QD. The observed large difference between NR and NS quenching efficiencies was attributed to the presence of the [110] facets only in the NR, which have higher surface energy.     

A facile synthesis of (6S,1′S)-(+)-hernandulcin and (6S,1′R)-(+)-epihernandulcin

A facile total synthesis of (+)-hernandulcin (1) was accomplished from (−)-isopulegol in 6 steps with 15% overall yield. Epoxidation of (−)-isopulegol with m-chloroperbenzoic acid followed by opening of the epoxide 3a with prenyl Grignard afforded the tertiary alcohol 4a with correct C-6 and C-1′ stereochemistry as a major product. Oxidation of the secondary alcohol in compound 4a to the ketone 5a was accomplished in high yield by using TPAP and N-methylmorpholine N-oxide. Conversion of the ketone 5a to α,β-unsaturated ketone via organoselenium intermediate gave (+)-hernandulcin (1). This method was also successfully applied to the synthesis of (+)-epihernandulcin (2).     

Untersuchungen an oxidischen Katalysatoren. XLII. Redoxverhalten des Nickels in NiNa?Y-Zeolithen 4. Einfluß der Zusammensetzung auf die Reduzierbarkeit von Nickel in NiNa?Y-Zeolithen

Studies on Oxide Catalysts. XLii. Redox Behaviour of Nickel in Zeolites NiNa? Y. 4. Influence of Composition on the Reducibility of Nickel in Zeolites NiNa? Y By chemical analysis (reaction with K₂Cr₂O₇) and ESCA investigations we determined the degree of reduction in reduced samples NiNa-Y as function of the mole ratio SiO₂/Al₂O₃ (module), of the Ni²⁺ degree of exchange and the kind of the second cations. (NH₄₊, Ca²+, Co²+, and Nd³+) in the temperature region of 620–770 K. The degree of nickel reduction increases with increasing module, decreasing degree of exchange and decreasing number of Brönsted acidic centres. This behaviour is caused by the influence of the interaction between cations Ni²⁺ and zeolite lattice on the reduction equilibrium.