Sturmian functions for nonlocal interactions

The problem of calculation of Sturmian functions (positive energy Weinberg states) for nonlocal (exchange) interactions is considered. It is shown that the method of continued fractions proposed by Horáek and Sasakawa makes the calculation of Sturmian eigenfunctions and eigenvalues feasible even for complicated nonlocal interactions. As an example Sturmian functions and Sturmian eigenvalues for the low energy electron-hydrogen scattering in the static exchange approximation are calculated. In addition a very general proof of convergence of the method of continued fractions is presented.Dedicated to the memory of Professor Jozef Kvasnica.     

一种标定新方法在FTIR定量分析中的应用

利用傅里叶变换红外(FTIR)光谱技术可以对气体组分的浓度进行连续的在线定量分析。在定量分析过程中,对FTIR进行标定是非常重要的环节之一,直接关系到定量分析是否可以进行和定量分析的精度。本文提出了一种新的标定方法(称之为“积分法”),以CO、HCI和水蒸气为例完成的实验结果表明：这一方法与传统方法(标气法)相比具有许多优点,准确性和稳定性都很好;尤为重要的是,对于传统方法无法解决的常温下为液态的气体物质的标定问题,利用这一新方法可以迎刃而解,而且有很好的精度。     

Reflex optical sensor based on dual metal gratings with high angular sensitivity

An interesting reflection phenomenon in a dual metal grating (DMG) structure is studied, which is related to the competition between Fabry-Prot (F-P) resonance effect and evanescent-field coupling effect inside the gap between the two composing single metal gratings. This competition leads to high angular sensitivity in response to the refractive index variation of the sample solution in the gap. A reflex optical sensor with high sensitivity based on DMG for detecting the change in refractive index is proposed and its performance theoretically is discussed.     

大质量恒星的形成:理论与观测

文章简要叙述了有关大质量恒星形成的理论以及相关观测证据。目前大质量恒星形成的理论主要有两种，即吸积说和并合说．吸积说认为，大质量星可能与小质量星形成于相似的过程；并合说主张大质量星可能是由小质量年轻星碰撞合并而成．解决这两种理论争论的关键在于在大质量星附近能否观测到吸积盘的存在，最新的观测表明大质量星更有可能是通过吸积增加自身的质量，但最终解决这一问题可能还需要更多的观测证据。文章还提出了一些本领域尚未解决的问题，为感兴趣的研究者提供参考。     

A new energy source originating from extra dimensions

In this work the Einstein gravitational field equations and the Lichnerowicz boundary formalism in the extra dimensions are used to build up our black hole model from 6-dimensional space－time. From the internal stress－energy tensor the solutions with energy levels and semiclassical space-quantization are obtained, which combines with only one metric condition outside the defect. We show a new type of energy source, which originates from extra dimensions. A part of the energy source of quasi-stellar object (QSO) maybe come from extra dimensions in that way. The theoretical arithmetic upper limit is identical to that of the output energy of QSO.     

激光陀螺锁区特性的研究

从理论和试验两个方面,研究了四边形腔环行激光陀螺的锁区特性.利用环行腔中背向散射光束具有相干性,导出了环行谐振腔综合背向散射与反射镜、反射镜之间的相对位置的关系.在有两个位移反射镜的四边形谐振腔中,理论上得到了综合背向散射系数与谐振腔腔长具有双波长周期.利用综合背向光强实验及锁区与陀螺工作模数实验分别验证了理论的正确性.试验证实散射光的强度与谐振腔的工作模数存在双模周期性,综合背向散射系数大,陀螺锁区大,反之亦然.     

激光陀螺磁灵敏度特性研究

分析、计算了激光陀螺的磁灵敏度特性,并进行了磁灵敏度试验.试验结果及分析表明：在腔体加工准确度不变的情况下,采用合理的设计可以大大降低激光陀螺在某些方向上的磁灵敏度,同时磁试验结果对于设计激光陀螺的磁屏蔽结构具有一定的实用价值.     

用偏光织构及透射光谱分析液晶器件的老化

对一组台式计算器液晶显示器进行了光辐照,研究了光辐照对液晶显示器件显示品质的影响。采用偏光显微镜观察到了辐照后液晶的偏光织构的变化,液晶中出现了平行的条纹状织构和失去消光作用的黑洞,随着接受光辐照时间的增加,黑洞数量越来越多,面积越来越大。通过由计算机控制的双光束紫外-可见分光光度计测试了透射光谱的变化,发现其透射率随着接受光辐照时间的增加而降低。分析结果表明,条纹状织构和黑洞的出现是由于液晶分子结构在紫外线的照射下发生了变化所致,失去消光作用的黑洞是导致液晶器件透射率持续下降的主要原因。     

A scanning tunneling microscopy study of PH3 adsorption on Si(1 1 1)-7 × 7 surfaces, P-segregation and thermal desorption

PH₃ adsorption on Si(1 1 1)-7 × 7 was studied after various exposures between 0.3 and 60 L at room temperature by means of scanning tunneling microscopy (STM). PH₃-, PH₂-, H-reacted, and unreacted adatoms can be identified by analyzing empty-state STM images at different sample biases. PH_x-reacted rest-atoms can be observed in empty-state STM images if neighboring adatoms are hydrogen terminated. Most of the PH₃ adsorbs dissociatively on the surface, generating H- and PH₂-adsorbed rest-atom and adatom sites. Dangling-bonds at rest-atom sites are more reactive than adatom sites and the faulted half of the 7 × 7 unit cell is more reactive than the unfaulted half. Center adatoms are overwhelmingly preferred over corner adatoms for PH₂ adsorption. The saturation P coverage is ∼0.18 ML. Annealing of PH₃-reacted 7 × 7 surfaces at 900 K generates disordered, partially P-covered surfaces, but dosing PH₃ at 900 K forms P/Si(1 1 1)- surfaces. Si deposition at 510 K leaves disordered clusters on the surface, which cannot be reordered by annealing up to 800 K. However, annealing above 900 K recreates P/Si(1 1 1)- surfaces. Surface morphologies formed by sequential rapid thermal annealing are also presented.