Mechanisms of Resonant Infrared Matrix-Assisted Pulsed Laser Evaporation

For the last decade, a variant of pulsed laser ablation, Resonant-Infrared Matrix-Assisted Pulsed Laser Evaporation (RIR-MAPLE), has been studied as a deposition technique for organic and polymeric materials. RIR-MAPLE minimizes photochemical damage from direct interaction with the intense laser beam by encapsulating the polymer in a high infrared-absorption solvent matrix. This review critically examines the thermally-induced ablation mechanisms resulting from irradiation of cryogenic solvent matrices by a tunable free electron laser (FEL). A semi-empirical model is used to calculate temperatures as a function of time in the focal volume and determine heating rates for different resonant modes in two model solvents, based on the thermodynamics and kinetics of the phase transitions induced in the solvent matrices. Three principal ablation mechanisms are discussed, namely normal vaporization at the surface, normal boiling, and phase explosion. Normal vaporization is a highly inefficient polymer deposition mechanism as it relies on collective collisions with evaporating solvent molecules. Diffusion length calculations for heterogeneously nucleated vapor bubbles show that normal boiling is kinetically limited. During high-power pulsed-FEL irradiation, phase explosion is shown to be the most significant contribution to polymer deposition in RIR-MAPLE. Phase explosion occurs when the target is rapidly heated (10⁸ to 10¹⁰ K/s) and the solvent matrix approaches its critical temperature. Spontaneous density stratification (spinodal decay) within the condensed metastable phase leads to rapid homogeneous nucleation of vapor bubbles. As these vapor bubbles interconnect, large pressures build up within the condensed phase, leading to target explosions and recoil-induced ejections of polymer to a near substrate. Phase explosion is a temperature (fluence) threshold-limited process, while surface evaporation can occur even at very low fluences.     

An Efficient Quantum Private Comparison of Equality over Collective-Noise Channels

This article proposes a collective-noise resistant QPC protocol with the help of an almostdishonest third party (TP) who may try to perform any sort of attacks to derive participants’ private secrets except colluding with any participant. The proposed scheme has some considerable advantages over the state-of-the-art QPC protocols over collective-noise channels, where it does not require any pre-shared key between the participants (Alice and Bob). Nevertheless, the proposed scheme can resist Trojan horse attacks without consuming half of the transmitted qubits and any additional equipment (wavelength filter and PNS) support. As a consequence, the proposed QPC protocol can guarantee higher qubit efficiency as compared to the others over collective noise channels.     

Numerical visualization of vortical structures in a lean premixed swirl combustor using LES

Abstract  

Large eddy simulation was performed to visualize the three-dimensional vortical structures interacting with a turbulent premixed in a lean premixed swirl combustor with varied equivalence ratio. It was found that the fluctuation of unsteady heat release due to the deformation of flame surface was significantly decreased as the equivalence ratio increased because of the change in interaction between inner vortical structures and flames. This phenomenon was another evidence of the amplification mechanism in the combustion instabilities due to the strong flame–vortex interactions under lean premixed conditions.     

Performance limits of pico-cell systems using radio-over-fiber techniques with an electroabsorption modulator

We investigate the performance limits of a pico-cell system using the radio- over-fiber technique with an electroabsorption modulator (EAM) in a 2.4 GHz wireless local area network (WLAN) environment. To understand the performance limits of the system using an EAM as the optical transceiver, we vary the optical modulation index (OMI) of the transmitter for different bias voltages to the EAM. Power margins in the links are found to estimate a possible service range, and packet loss rates (PLRs) in the pico-cell system are measured to evaluate the transmission performance. The total service range can be extended up to 3 m by adjusting the OMI of the transmitter for different applied bias voltages to the EAM.     

A method for automatic identification of water and fat images from a symmetrically sampled dual-echo Dixon technique

Sampling water and fat signals symmetrically (i.e., at 0° and 180° relative phase angles) in a dual-echo Dixon technique offers high intrinsic tolerance to phase fluctuations in postprocessing and maximum signal-to-noise performance for the separated water and fat images. However, identification of which image is water and which image is fat after their separation is not possible based on the phase information alone. In this work, we proposed a semiempirical automatic image identification method that is based on the intrinsic asymmetry between the water and fat chemical shift spectra. Specifically, the approximately bimodal feature of the fat spectra and the observation that most in vivo tissues are either predominantly water or predominantly fat are used to construct a spectrum-based algorithm. Additional refinement is accomplished by considering the spatial distribution of the tissues that may have a coexistence of water and fat. The final improved algorithm was tested on a total of 131 three-dimensional patient datasets collected from different scanners and found to yield correct water and fat identification in all datasets.     

Effective potential for highly relativistic neutrinos in a weakly magnetized medium and their oscillation

We have calculated the effective potential experienced by highly relativistic neutrinos in a weakly magnetized electron–positron plasma, where a momentum-dependent finite-width correction to the propagator of W is considered to account for the threshold effect. Magnetars are believed to be sources of TeV–PeV neutrinos which are produced due to photomeson and proton–proton interactions in their atmosphere. We have studied the resonant-oscillation process ν _e ↔ ν _μ,τ of the highly relativistic neutrinos in the atmosphere of SGR 1806-20, which is a magnetar. It is shown that, for high-energy neutrinos propagating within the magnetar atmosphere, the resonance condition can never be satisfied. On the other hand, if GeV neutrinos are produced deep inside the magnetar atmosphere, where the temperature is about 50 keV or more, then these neutrinos can undergo resonant oscillation.     

Pressure dependence of the electric field gradient and knight shift tensors of single crystal gallium

Nuclear pure quadrupole resonance has been observed in single crystal gallium as a function of hydrostatic pressure up to 7 kbar at temperatures of 77, 198 and 273 K. The resonance frequency v_Q increases linearly with pressure and the slope ($\text{δv}{}_{\mathrm{O}}\text{δP}$)_T is 13.7, 15.5 and 16.3 Hz/bar at 77, 198 and 273 K respectively. The asymmetry parameter decreases nonlinearly with pressure. Using compressibility and thermal expansion data, the volume dependence of the major principle component of the electric field gradient was deduced. The principal components K_x, K_y and K_z of the Knight shift tensor have been measured as a function of pressure to 6 kbar at 77 K. The isotropic and anisotropic components of the Knight shift were deduced as a function of pressure, and K_iso is found to vary with volume as V^{4.95 ± 0.80}.     

具有刚性加强端的斜锥壳的渐近解法

本文在文献[1]、[2]的基础上,利用将内力及位移展开成k=(h/λ)~(1/2)及斜锥偏度参数m的双重渐近幂级数的方法,得出了斜锥壳的渐近解,同时以直角斜锥壳承受正压力情况为例,给出了它的应力计算分析表达式。为了验证所给公式的精确程度,计算了斜锥壳薄膜应力的数值解,并作了两个斜锥壳试件的电测试验。结果表明,本文所得的渐近解的误差基本上在(h/λ)~(1/2)及m~2的量级范围內。对于斜锥壳这类形状复杂的构件,直接求解薄壳基本方程是很困难的,数值解只能求出在给定尺寸时的解答,不能得出适用于一般尺寸的解析解,对具有小参数特点的构件,渐近解的优点在于能得到具有一定精度的应力分析表达式,便于工程设计应用。     

Electron spin resonance for quantitative assay of chlorpromazine in drug formulations by oxidation with cerium(IV) in sulfuric acid media

For the first time electron spin resonance (ESR) spectroscopic technique has been used for a highly selective determination of chlorpromazine. The method is based on the oxidation reaction of chlorpromazine with cerium(IV) in sulfuric acid media. In this method 3.8x10(-3) mol dm(-3) cerium(IV) was used in 0.035 mol dm(-3) sulfuric acid with the ESR spectra recorded at room temperature. A calibration equation of the following form was obtained over the linear concentration range of 10-100 ppm with a correlation coefficient (r) of 0.999: A=1.355+0.0382C. The results obtained by the ESR method were found to be comparable with those obtained by the British Pharmacopoeia (BP) method. The method suffers no interferences excipients rendering the method suitable for determination of this drug in pharmaceutical preparations.     

Precise and accurate determination of the stoichiometry of CuInS2 semiconductor material by electrochemical methods

Summary CuInS₂ is one of the important I–III–VI₂ ternary compounds which has in recent years received increasing interest in semiconductor science. In this study an electrochemical method has been developed based on a limited amount of available sample (0.5–10mg) for the precise and accurate determination of CuInS₂ composition. After decomposition of the sample in concentrated HNO₃ under pressure, copper and indium were sequentially determined by constant potential coulometry, and sulfur (as sulfate) by amperometric titration. Various experimental parameters which ensure high precision and accuracy of the results were carefully evaluated and calibrated. The overall errors for the determination of copper, indium and sulfur in a 10 mg sample were found to be +0.10%, –0.12% and +0.16%, respectively, which fullfills the requirement for accurate stoichiometric assessment.

---

Reproduzierbare und genaue Bestimmung der Stöchiometrie von CuInS₂-Halbleitermaterial mit Hilfe elektrochemischer Verfahren

---

Presented at the 10th International Symposium on Microchemical Techniques, August 25–29, 1986, Antwerp, Belgium