Amphoteric refraction exhibited by anisotropic crystals

Amphoteric refraction of light ray at the interface between isotropic materials and anisotropic materials is analyzed. Depending on the incident angle, the refractive light ray can either refract positively or negatively. This amphoteric refraction phenomenon can be quite prevalent when the difference of the two principal refractive indices is large. The reflectance under various incident angles has also been calculated, and an experimental demonstration with a calcite crystal in air is presented.     

Optimization of microcrystalline silicon thin film solar cell isolation processing parameters using ultraviolet laser

This study used ultraviolet laser to perform the microcrystalline silicon thin film solar cell isolation scribing process, and applied the Taguchi method and an L₁₈ orthogonal array to plan the experiment. The isolation scribing materials included ZnO:Al, AZO transparent conductive film with a thickness of 200 nm, microcrystalline silicon thin film at 38% crystallinity and of thickness of 500 nm, and the aluminum back contact layer with a thickness of 300 nm. The main objective was to ensure the success of isolation scribing. After laser scribing isolation, using the minimum scribing line width, the flattest trough bottom, and the minimum processing edge surface bumps as the quality characteristics, this study performed main effect analysis and applied the ANOVA (analysis of variance) theory of the Taguchi method to identify the single quality optimal parameter. It then employed the hierarchical structure of the AHP (analytic hierarchy process) theory to establish the positive contrast matrix. After consistency verification, global weight calculation, and priority sequencing, the optimal multi-attribute parameters were obtained. Finally, the experimental results were verified by a Taguchi confirmation experiment and confidence interval calculation. The minimum scribing line width of AZO (200 nm) was 45.6 μm, the minimum scribing line width of the microcrystalline silicon (at 38% crystallinity) was 50.63 μm and the minimum line width of the aluminum thin film (300 nm) was 30.96 μm. The confirmation experiment results were within the 95% confidence interval, verifying that using ultraviolet laser in the isolation scribing process for microcrystalline silicon thin film solar cell has high reproducibility.     

Performance improvement of electrochromic display devices employing micro-size precipitates of tungsten oxide

In this paper, we studied the effect of micro-size WO₃ precipitates on the electrochromic characteristics based on aging test. The electrochromic mechanism can be effectively investigated by a solid-state TaN/WO₃/ITO capacitor. The experimental results reveal that WO₃ electrochromic devices with optimized aging time of 4 days exhibit a higher optical contrast and longer retention time, which is mainly attributed to the formation of micro-size WO₃ precipitates during aging process. The performance improvement using micro-size WO₃ precipitates has the potential in future large-area window or energy efficient display applications.     

Precision continuous-wave cavity ringdown spectroscopy of CO<Subscript>2</Subscript> at 1064 nm

A high performance continuous-wave cavity ringdown spectrometer using a rapidly swept cavity has been applied to investigate weak absorption of CO₂ line near 1064 nm. In the experimental setup, offset locking of the Nd:YAG laser to other iodine-stabilized Nd:YAG laser provides a frequency accuracy better than 20 kHz. The ringdown time was obtained by fitting the experimental ringdown data to a theoretically obtained ringdown curve. The absorption coefficient and absolute center wavelength are determined with accuracy better than two orders of magnitude with respect to the previous observations. Our experimental setup yields high performance in a relatively simple, low cost, and compact system that is amenable to chemical analysis of trace gases in medicine, agriculture, industry, and the environment.     

ON THE PROBLEM OF THE DUAL CHARGE (MAGNETIC MONOPOLE) OF NON-ABELLAN GROUPS (Ⅱ)

The method of relating the gauge potential to the connection on a spherical surface developed in a previous paper is generalized to the discussion of the potential of an SU(2) magnetic monopole with O(5) symmetry. Expressions for the potential of the monopole with double string singularity or single string singularity are obtained. Finally, by a combined coordinate-gauge transformation, we obtain a string free expression for an SU(2) magnetic monopole with O(5) symmetry.     

Self-Assembled Multistable Scattering Mode for Versatile Energy-Saving Smart Windows

Smart windows are crucial to dynamic control over light transmission to fulfill various demands in energy saving, privacy, and information display; however, most present technologies still perform a single function (often tint or haze adjustment) and require continuous electricity for operation. In this study, novel self-assembled ionic liquid crystals (ILCs) doped with negative cholesteric liquid crystals (CLCs) to offer electrically switchable and stable scattering-mode light modulators are presented. The novel smectic A phase based on the ILCs exhibits high solubility in the adopted nematics, enhancing the LC device's performance in several ways, including improved homogeneity, stable alignment quality, prolonged stability, and simplified fabrication. The LC device can potentially offer a dynamically rapid switching function between stable transparent (imperfect fingerprint textures) states and stable scattering (focal conic textures with small domains) states by using external stimuli and highly maintained multistable states for prolonged periods, even when the external stimuli are removed. The LC device also offers polarization-independent scattering and transparent-mode LC light modulators, low operating voltage, excellent contrast, and broad viewing angles. Its versatility and outstanding field-off stability make it ideal for various applications such as smart lighting, building climate control, energy-saving displays, and augmented reality (AR) glasses.     

FNR-Ⅰ核磁共振波谱仪

基于自旋回波的原理研制成功了一台专用于分析磁性材料的核磁共振波谱仪。其工作频率为25-80MHz;输出功率10W,可用它在77-300°k范围测量铁磁材料的共振谱线,增强因数和自旋-自旋弛豫时间T₂;它也可用于测量非磁性固体的宽核磁共振谱线。     

Reconstruction of physics objects at the Circular Electron Positron Collider with Arbor

After the Higgs discovery, precise measurements of the Higgs properties and the electroweak observables become vital for the experimental particle physics. A powerful Higgs/Z factory, the Circular Electron Positron Collider (CEPC) is proposed. The Particle Flow oriented detector design is proposed to the CEPC and a Particle Flow algorithm, Arbor is optimized accordingly. We summarize the physics object reconstruction performance of the Particle Flow oriented detector design with Arbor algorithm and conclude that this combination fulfills the physics requirement of CEPC.     

Study of three rotating radio transients with FAST

Rotating radio transients(RRATs) are peculiar astronomical objects whose emission mechanism remains under investigation.In this paper, we present observations of three RRATs, J1538+2345, J1854+0306 and J1913+1330, carried out with the Fivehundred-meter Aperture Spherical radio Telescope(FAST). Specifically, we analyze the mean pulse profiles and temporal flux density evolutions of the RRATs. Owing to the high sensitivity of FAST, the derived burst rates of the three RRATs are higher than those in previous reports. RRAT J1854+0306 exhibited a time-dynamic mean pulse profile, whereas RRAT J1913+1330 showed distinct radiation and nulling segments on its pulse intensity trains. The mean pulse profile variation with frequency is also studied for RRAT J1538+2345 and RRAT J1913+1330, and the profiles at different frequencies could be well fitted with a cone-core model and a conal-beam model, respectively.