Synthesis and Characterization of Cationic Glycidyl-Based Poly(aminoester)-Folic Acid Targeting Conjugates and Study on Gene Delivery

A new poly(aminoester) (EPAE-FA) containing folic acid and amino groups in the backbone and side chain was synthesized. EPAE-FA self-assembled readily with the plasmid DNA (pCMV-βgal) in HEPES buffer and was characterized by dynamic light scattering, zeta potential, fluorescence images, and XTT cell viability assays. To evaluate the transfection effect of graft ratio of FA on the EPAE system, EPAE-FA polymers with two different graft ratios (EPAE-FA12k and EPAE-FA14k) were also prepared. This study found that all EPAE-FA polymers were able to bind plasmid DNA and yielded positively charged complexes with nano-sized particles ( < 200 nm). To assess the transfection efficiency mediated by EPAE and EPAE-FA polymers, we performed in vitro transfection activity assays using FR-negative (COS-7) and FR-positive (HeLa) cells. The EPAE-FA12k/DNA and EPAE-FA14k/DNA complexes were able to transfect HeLa cell in vitro with higher transfection efficiency than PEI25k/DNA at the similar weight ratio. These results demonstrated that the introduction of FA into EPAE system had a significant effect on transferring ability for FR-positive cells (HeLa). Examination of the cytotoxicity of PEI25k and EPAE-FA system revealed that EPAE-FA system had lower cytotoxicity. In this paper, EPAE-FA seemed to be a novel cationic poly(aminoester) for gene delivery and an interesting candidate for further study.     

Synthesis of Iso-condensed Heteroaromatic Pyrroles and Their Application in the Preparation of Conducting Polymers

Iso-condensed heteroaromatic pyrroles 1 are 10 -electron aromatic compounds. They are of interest from both theoretical and synthetic points of view. They are the cyclic analogues of heteroaromatic ortho-quinodimethanes 2, and can react with dienophiles in a Diels-Alder reaction to give the synthetically useful cycloadducts 3. Many of them are also of potential pharmaceutical importance because they are isosteric with indoles. Iso-condensed heteroaromatic pyrroles 1 can be used also as the monomers for the synthesis of new conducting polymers 5 with special properties and characteristics. However, the methods for the efficient preparation of the iso-condensed heteroaromatic pyrroles are quite limited. Iso-condensed heteroaromatic pyrroles are generally unstable in acidic conditions and are easily oxidized by air. In our laboratories, we developed three methods for the preparation of this labile heterocyclic ring system under acidic, neutral, and basic conditions.1 Synthesis of the conjugated systems such as 6 for OLED applications will also be discussed.     

Absorption and foaming of plastics using carbon dioxide

In this study, carbon dioxide was used as a foaming agent for common plastics, such as acrylonitrile–butadiene–styrene (ABS) polymer, polystyrene (PS), polypropylene (PP), high-density polyethylene (HDPE), and high impact polystyrene (HIPS). Carbon dioxide was first absorbed by the sample plastics placed within a pressure vessel at various pressure levels and absorption time intervals. The Henry’s constant of the absorbed carbon dioxide in the plastics was determined. The diffusion coefficient of carbon dioxide in polymer was also identified by curve-fitting with the relationship between the absorbed amount and time. The results showed that ABS, PS, and HIPS absorbed more gas than did PP and HDPE, because PP and HDPE exhibit higher crystallinity. Generally, a polymer can take up saturation absorption of gas under higher pressure. After absorption, the foaming process occurred at various temperatures and time intervals. The cell structure, density, and size of the plastic foams were then investigated using scanning electron microscopy. A longer foaming period and higher temperature increase the size of the cell and decrease the cell density (the number of bubbles per unit volume). A dense skin layer without bubbles appeared directly adjacent to the surface of the foamed plastics. Its thickness decreased if the foaming process took place at higher temperatures.     

Nickel-catalyzed, cascade cycloadditions of 1-ethynyl-8-halonaphthalenes with nitriles: synthesis, structure, and physical properties of new pyrroloarenes

The reaction of 1-ethynyl-8-halonaphthalenes 1 with nitriles in the presence of the catalytic system [NiBr(2)(dppe)]/Zn (dppe=1,2-bis(diphenylphosphino)ethane) is found to produce unusual pyrroloarenes 2. The carbon-nitrogen triple bond in nitrile is activated twice, and five new bonds are formed in a one-pot transformation, which causes a pyrrole and two six-membered rings to be generated simultaneously. The scope and limitations of this reaction are examined. Similarly, alkyl-bridged diynes also furnish the corresponding polycycles. Diaryl-substituted cycloadducts 2 (R(1)=Ar) are fluxional, because of the restriction in rotation of the aryl groups. The rotational barrier is studied by performing (1)H NMR experiments at various temperatures. The structures of several compounds are determined by X-ray crystallographic analysis. The photophysical and electrochemical properties of the pyrroloarenes are also investigated.     

Two New Saturated Sesquiterpene Diols—Cadinan-3β, 9β-Diol and Cadinan-3β, 9α-Diol from Taiwania Cryptomerioides Hayata

From the wood of Taiwania cryptomerioides Hayata, two new sesquiterpenes, cadinan-3β, 9β-diol and cadinan-3β, 9α-diol were isolated as minor components. Their structures were elucidated as (I) and (II), respectively.     

Isolation of sesquiterpenoids from sponge Dysidea avara and chemical modification of avarol as potential antitumor agents

The marine sponge Dysidea avara contained avarol (1) and avarone (2). Avarol on acylation yielded 2',5'-O-dibenzoylavarol (3); 2,5'-O-(4-chlorobenzoyl)avarol (4); 2,5'-O-dicinnamoylavarol (5); 2,5'-O-(4-bromobenzoyl)avarol(6); 2',5'-O-dioctanoylavarol (7); 2',5'-O-(4-fluorobenzoyl)avarol (8) and diacetylavarol (9). The structural elucidation of all the compounds 1-9 have been done by spectral analysis. The cytotoxicity of these compounds were also determined and evaluated. Compounds 6 and 9 showed selective cytotoxicity against Hepa (human hepatoma) and KB cell lines respectively.     

Evaluation of surface charge density and surface potential by electrophoretic mobility for solid lipid nanoparticles and human brain-microvascular endothelial cells

Electrophoretic mobility, zeta potential, surface charge density, and surface potential of cacao butter-based solid lipid nanoparticles (SLN) and human brain-microvascular endothelial cells (HBMEC) were analyzed in this study. Electrophoretic mobility and zeta potential were determined experimentally. Surface charge density and surface potential were evaluated theoretically via incorporation of ion condensation theory with the relationship between surface charge density and surface potential. The results revealed that the lower the pH value, the weaker the electrostatic properties of the negatively charged SLN and HBMEC. A higher content of cacao butter or a slower stirring rate yielded a larger SLN and stronger surface electricity. On the contrary, storage led to instability of SLN suspension and weaker electrical behavior because of hydrolysis of ionogenic groups on the particle surfaces. Also, high H+ concentration resulted in excess adsorption of H+ onto HBMEC, rendering charge reversal and cell death. The largest normalized discrepancy between surface potential and zeta potential occurred at pH = 7. For a fixed biocolloidal species, the discrepancy was nearly invariant at high pH value. However, the discrepancy followed the order of electrical intensity for HBMEC system at low pH value because mammalian cells were sensitive to H+. The present study provided a practical method to obtain surface charge properties by capillary electrophoresis.     

Briarenolide E: the first 2-ketobriarane diterpenoid from an octocoral Briareum sp. (Briareidae)

A novel 2-ketobriarane diterpenoid, briarenolide E (1), was isolated from an octocoral Briareum sp. The structure of briarane 1 was elucidated by interpretations of spectral data. Compound 1 displayed modestly inhibitory effects on the generation of superoxide anions and the release of elastase by human neutrophils.     

Direct profiling of phospholipids and lysophospholipids in rat brain sections after ischemic stroke

Stroke, a deleterious cerebrovascular event, is caused by a critical reduction in the blood flow to the brain parenchyma that leads to brain injury and loss of brain functions. The inflammatory responses following ischemia often aggravate the neurological damage. Several pro‐inflammatory mediators released after stroke are closely related to the metabolism of phospholipids. In this study we directly profiled the changes in phospholipids in the infarcted rat cerebral cortex 24 hours after middle cerebral artery occlusion (MCAO) using matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS). Several phosphatidylcholine (PC) species and sphingomyelin (SM) were significantly decreased after infarction. The cationization pattern of the remaining PCs showed a prominent shift from a mostly potassiated or protonated form to a predominantly sodiated pattern. Stroke also elevated the lysophosphatidylcholines (LPCs) and heme in tissue. The isobaric pairs in PC and LPC classes were resolved by masses through their respective alkali metal adducts in the presence of CsCl. The major fatty acyl LPC species were also structurally confirmed by MALDI‐MS/MS. Overall, the results described the changes in PC and LPC species in the infarcted rat cortex. The elevated tissue levels of LPCs and heme signify the ongoing pathological lipid breakdown and the state of parenchymal inflammation. The elevated LPC level in tissue suggests a means of intervention through lysophospholipid metabolism that could potentially benefit the management of stroke and other acute neurological injuries. Copyright © 2010 John Wiley & Sons, Ltd.     

In situ preparation of high relaxivity iron oxide nanoparticles by coating with chitosan: A potential MRI contrast agent useful for cell tracking

Iron oxide nanocrystals are of considerable interest in nanoscience and nanotechnology because of their nanoscale dimensions, nontoxic nature, and superior magnetic properties. Colloidal solutions of magnetic nanoparticles (ferrofluids) with a high magnetite content are highly desirable for most molecular imaging applications. In this paper, we present a method for in situ coating of superparamagnetic iron oxide (SPIO) with chitosan in order to increase the content of magnetite. Iron chloride salts (Fe³⁺ and Fe²⁺) were directly coprecipitated inside a porous matrix of chitosan by Co-60 γ-ray irradiation in an aqueous solution of acetic acid. Following sonication, iron oxide nanoparticles were formed inside the chitosan matrix at a pH value of 9.5 and a temperature of 50 °C. The [Fe³⁺]:[Fe²⁺]:[NH₄OH] molar ratio was 1.6:1:15.8. The final ferrofluid was formed with a pH adjustment to approximately 2.0/3.0, alongside with the addition of mannitol and lactic acid. We subsequently characterized the particle size, the zeta potential, the iron concentration, the magnetic contrast, and the cellular uptake of our ferrofluid. Results showed a z-average diameter of 87.2 nm, a polydispersity index (PDI) of 0.251, a zeta potential of 47.9 mV, and an iron concentration of 10.4 mg Fe/mL. The MRI parameters included an R1 value of 22.0 mM⁻¹ s⁻¹, an R2 value of 202.6 mM⁻¹ s⁻¹, and a R2/R1 ratio of 9.2. An uptake of the ferrofluid by mouse macrophages was observed. Altogether, our data show that Co-60 γ-ray radiation on solid chitosan may improve chitosan coating of iron oxide nanoparticles and tackle its aqueous solubility at pH 7. Additionally, our methodology allowed to obtain a ferrofluid with a higher content of magnetite and a fairly unimodal distribution of monodisperse clusters. Finally, MRI and cell experiments demonstrated the potential usefulness of this product as a potential MRI contrast agent that might be used for cell tracking.