Solvent effect of fluorescence on/off switching of diarylethene linked to excited-state intramolecular proton transfer fluorophore

Efficient fluorescence on/off switching of a dyad consisting of a photochromic diarylethene and a fluorescence dye based on excited state intramolecular proton transfer (ESIPT) was designed and demonstrated. Diarylethenes linked to (2-(2-methoxy-5-methylphenyl)benzothiazol-6-yl)- and (2-(2-hydroxy-5-methylphenyl)benzothiazol-6-yl)-9,9-dioctylfluorene moieties (1a and 2a, respectively) exhibited fluorescence on/off switching upon alternating irradiation with ultraviolet and visible light in various solvents. The fluorescence on/off contrast of 2a was found to be higher than that of 1a in n-hexane because the overlap integral between the absorption spectrum of the diarylethene closed-ring form and the fluorescence spectrum of 2a is larger than that of 1a. Diarylethene 2a exhibited green fluorescence with large Stokes shift in n-hexane, which is ascribed to the ESIPT process from the enol form to the keto form. In contrast, the fluorescence of 2a in N,N-dimethylsulfoxide (DMSO) was mainly observed as blue fluorescence from enol form, while diarylethene 1a exhibited blue fluorescence in n-hexane and DMSO. The fluorescence on/off contrast of 2a in n-hexane was higher than that in DMSO because of the difference in the spectral overlaps in n-hexane and DMSO.     

Intramolecular Diels-Alder reaction of N-allyl 2-furoyl amides: effect of steric strain and amide rotational isomerism

Intramolecular Diels-Alder reactions of various N-allyl 2-furoyl amides with different substituents on the nitrogen atom were investigated. The reaction of amides having bulky substituents proceeded at a faster rate than the analogs whose substituents were of less bulkiness. From the systematic experimental survey of the substituent effects and the energetic evaluation based on the DFT calculations at the B3LYP/6-31G(d) level, the enhanced reactivity was ascribed to the relief of steric strain upon cyclization rather than the amide rotational isomerism governed by the bulky substituents.     

Direct detection of nanoparticles and components in smoke by time-of-flight mass spectrometry with soft plasma ionization

A new system combining a soft plasma ionization (SPI) source with a time-of-flight mass spectrometer (TOFMS) has been successfully developed and applied to direct and on-line analysis of nanoparticles in smoke generated during combustion of mosquito coils with no sample preparation. The mass spectra of nanoparticles in smoke were examined in conjunction with the effects of species, pressure and current of the SPI discharge on fragmentation. The results indicated that a maximum mass of m/z 1576 was detectable when the following optima SPI conditions were satisfied: a He gas pressure of 1000 Pa with an air pressure of 1600 Pa and a discharge current of 110 mA. Furthermore, considering the results for emission spectra we suppose an ionization mechanism of SPI in which excitation and ionization of nitrogen molecule is promoted by the presence of He gas, leading to promote the smoke sample ionization. The mass spectrum of nanoparticles showed specific patterns of a peak interval of 74 which were assigned to triacetylene (1,3,5-hexatriyne). The most abundant peak in the mass spectrum, at m/z 452, was assigned to triacontanoic acid.     

Theoretical study on singlet oxygen adsorption onto surface of graphene-like aromatic hydrocarbon molecules

Recently, graphene sheet is one of interesting systems to realize novel electronic properties. Especially, interaction between graphene and adsorbed oxygen molecule is very important to control electronic condition. In this paper, we employed some aromatic hydrocarbons as simple systems of graphene sheet and ab initio MO calculations were carried out to investigate inter-molecular interaction. It is found that not triplet but singlet O₂ molecule have potential of chemisorption onto graphene surface. From the calculated potential energy surface (PES) for distance between benzene and O₂ molecules, meta-stable structure is found at about 1.5 Å with potential barrier. In the optimized structure of its meta-stable state, structural strain can be relaxed through bending of planer benzene ring. Its energy is estimated at 70.10 kcal/mol for benzene. We also estimated the strain effects for naphthalene and pyrene molecules as larger case of graphene and they were 80.85 and 72.45 kcal/mol, respectively.     

Aerobic reduction of olefins by in situ generation of diimide with synthetic flavin catalysts

A versatile reducing agent, diimide, can be generated efficiently by the aerobic oxidation of hydrazine with neutral and cationic synthetic flavin catalysts 1 and 2. This technique provides a convenient and safe method for the aerobic reduction of olefins, which proceeds with 1 equiv of hydrazine under an atmosphere of O(2) or air. The synthetic advantage over the conventional gas-based method has been illustrated through high hydrazine efficiency, easy and safe handling, and characteristic chemoselectivity. Vitamin B(2) derivative 6 acts as a highly practical, robust catalyst for this purpose because of its high availability and recyclability. Association complexes of 1b with dendritic 2,5-bis(acylamino)pyridine 15 exhibit unprecedented catalytic activities, with the reduction of aromatic and hydroxy olefins proceeding significantly faster when a higher-generation dendrimer is used as a host pair for the association catalysts. Contrasting retardation is observed upon similar treatment of non-aromatic or non-hydroxy olefins with the dendrimer catalysts. Control experiments and kinetic studies revealed that these catalytic reactions include two independent, anaerobic and aerobic, processes for the generation of diimide from hydrazine. Positive and negative dendrimer effects on the catalytic reactions have been ascribed to the specific inclusion of hydrazine and olefinic substrates into the enzyme-like reaction cavities of the association complex catalysts.     

Wide control of proton conductivity in porous coordination polymers

The proton conductivities of the porous coordination polymers M(OH)(bdc-R) [H(2)bdc = 1,4-benzenedicarboxylic acid; M = Al, Fe; R = H, NH(2), OH, (COOH)(2)] were investigated under humid conditions. Good correlations among pK(a), proton conductivity, and activation energy were observed. Fe(OH)(bdc-(COOH)(2)), having carboxy group and the lowest pK(a), showed the highest proton conductivity and the lowest activation energy in this system. This is the first example in which proton conductivity has been widely controlled by substitution of ligand functional groups in an isostructural series.     

Potential energy curve for ring-opening reactions: comparison between broken-symmetry and multireference coupled cluster methods

The spin-unrestricted Hartree-Fock (UHF)-based coupled cluster singles and doubles (UHF-CCSD) and Mukherjee's state-specific multireference CCSD (MkCCSD) methods are applied to four ring-opening reactions. The spin-restricted Hartree-Fock (RHF)-based CCSD (RHF-CCSD) calculations are also performed for comparison. In the case of the UHF-CCSD method, an approximate spin-projection (AP) method is applied to the broken-symmetry (BS) singlet solution to remove the spin contamination effect. For potential energy curves (PECs) of all reactions presented in this study, the results of RHF-CCSD and UHF-CCSD are substantially different from those of MkCCSD, while the results after the AP method (AP-UCCSD) reproduce the MkCCSD results well. It strongly suggests that the spin contamination effect should be removed by the AP correction even at the UHF-CCSD level to predict reliable energetics of these reactions.     

MOF-on-MOF heteroepitaxy: perfectly oriented [Zn2(ndc)2(dabco)]n grown on [Cu2(ndc)2(dabco)]n thin films

We report the successful heteroepitaxial growth of perfectly oriented hybrid MOF thin films. By employing step-by-step liquid-phase epitaxy (LPE), [Zn(2)(ndc)(2)(dabco)](n) was grown on [Cu(2)(ndc)(2)(dabco)](n), thus demonstrating that the MOF-on-MOF deposition scheme developed for powdered microcrystalline MOF materials can also be applied in connection with LPE for MOF thin films or multilayers. The deposition was monitored by surface plasmon resonance (SPR) spectroscopy, the resulting MOF heterostructures were characterized using IR spectroscopy and different types of X-ray diffraction (XRD)-based techniques. The results suggest that the LPE method is a promising way to fabricate and grow MOF heterostructures, and also demonstrates the potential of [Cu(2)(ndc)(2)(dabco)](n) MOF thin films as substrates for the LPE-based growth of different MOFs on top.     

Hydroxyl group recognition by hydrogen-bonding donor and acceptor sites embedded in a layered metal-organic framework

One of the dominant types of interactions between host and guest molecules is hydrogen-bonding, and these interactions can work selectively for a guest molecule. Here, we demonstrate a metal-organic framework (MOF) having both hydrogen-bonding donor and acceptor sites that are quite effective for selective sorption. The MOF selectively interacts with hydroxylic guests in contrast to aprotic hydrogen-bonding guests and shows a sorption selectivity for protic H(2)O, MeOH, and EtOH guests. Notably, this is the first compound that shows complete selectivity in adsorption not for MeCN and MeCHO but for EtOH, which has similar fundamental properties except for its proticity.     

Precise control and consecutive modulation of spin transition temperature using chemical migration in porous coordination polymers

Precise control of spin transition temperature (T(c)) is one of the most important challenges in molecular magnetism. A Hofmann-type porous coordination polymer {Fe(pz)[Pt(II)(CN)(4)]} (1; pz = pyrazine) exhibited cooperative spin transition near room temperature (T(c)(up) = 304 K and T(c)(down) = 284 K) and its iodine adduct {Fe(pz)[Pt(II/IV)(CN)(4)(I)]} (1-I), prepared by oxidative addition of iodine to the open metal sites of Pt(II), raised the T(c) by 100 K. DSC and microscopic Raman spectra of a solid mixture of 1-I and 1 revealed that iodine migrated from 1-I to 1 through the grain boundary after heating above 398 K. We have succeeded in precisely controlling the iodine content of {Fe(pz)[Pt(CN)(4)(I)(n)]} (1-In; n = 0.0-1.0), which resulted in consecutive modulation of T(c) in the range 300-400 K while maintaining the hysteresis width. Furthermore, it was demonstrated that iodine migration in the solid mixture was triggered by the spin transition of 1-I. The magnetically bistable porous framework decorating guest interactive open-metal-site in the pore surface makes it possible to modulate T(c) ad arbitrium through unique postsynthetic method using iodine migration.