New indole trimers as precursors for molecular electronic materials

We have prepared two new C₃-symmetric, substituted-triazatruxene molecules using a facile one-pot trimerisation of 5-carboxyindole and 6-bromoindole in acetic acid using Br₂, giving 2a and 3a, respectively. These were subsequently modified by the addition of six alkyl chains to the N- and carboxyl-positions of 2a giving 2b and three alkyl chains to the N-positions of 3a giving 3b. The new molecules were characterised using cyclic voltammetry, UV/vis and emission spectroscopy, DFT calculations and in the case of 3b, field-effect transistor measurements showing gate-modulated source-drain current. These represent a straightforward route to large polyaromatic molecules with easily-modified side groups and are suitable as building blocks for synthesis of functional molecules for materials.     

Morphological change of gold-dendrimer nanocomposites by laser irradiation

Gold-dendrimer nanocomposites are prepared in aqueous solutions in the presence of poly(amidoamine)dendrimers (PAMAM) (generation 3 and 5) or poly(propyleneimine)dendrimers (PPI) (generation 3 and 4) by wet chemical NaBH(4) method. Thus prepared gold-dendrimer nanocomposites are irradiated by laser at 532 nm. UV-vis absorption spectroscopy and transmission electron microscopy reveal that the gold nanoparticles grow with the laser irradiation time as well as the fluence of the laser; in particular, the gold nanoparticles prepared at lower concentrations of PAMAM dendrimer as well as lower generations of PAMAM grow significantly. On the other hand, in the case of PPI dendrimers, the gold nanoparticles hardly grow by irradiation. In addition, dynamic light-scattering measurements show that the laser irradiation markedly promotes the association of the gold-PAMAM G3 dendrimer nanocomposites compared to that of the gold-PAMAM G5 dendrimer nanocomposites, while the sizes of association for the gold-PPI G3, G4 dendrimer nanocomposites hardly change by laser irradiation.     

Wavelength dependence of matrix-assisted laser desorption and ionization using a tunable mid-infrared laser

Matrix-assisted laser desorption and ionization by infrared laser (IR-MALDI) is expected to be an effective methods for soft-ionization of high-molecular weight proteins and intracellular proteins. IR-MALDI is not widely used because its low sensitivity, complexity, high cost, and as it does not work well on commercial MALDI time-of-flight mass spectrometers (TOFMSs). We employed a tunable mid-infrared (MIR) laser as a light source for MALDI to investigate the IR-MALDI. The laser wavelength can be tuned within a range from 5.5 to 10.0 μm, and included several biomaterial group vibration modes. We evaluated the wavelength dependence of ionization in IR-MALDI for four matrices: succinic acid, urea, 3,5-dimethoxy-4-hydroxycinnamic acid (sinapic acid) and 2,5-dihydroxybenzoic acid (DHB). These matrices contained various groups of vibration modes, and absorbed an infrared (IR) energy at a specific wavelength. The mass spectra of angiotensin II was obtained at a specific wavelength corresponding to the CO stretching and benzene ring vibration mode. In IR-MALDI, we considered the strong molecular bond attracting an electron from a neighboring hydrogen atom, possibly protonating the hydrogen atom.     

Adsorption and micellization behavior of novel gluconamide-type gemini surfactants

The adsorption and micellization behavior of novel sugar-based gemini surfactants (N,N(')-dialkyl-N,N(')-digluconamide ethylenediamine, Glu(n)-2-Glu(n), where n is the hydrocarbon chain length of 8, 10 and 12) has been studied on the basis of static/dynamic surface tension, fluorescence, dynamic light scattering (DLS) and cryogenic transmission electron microscope (cryo-TEM) data. The static surface tension of the aqueous Glu(n)-2-Glu(n) solutions measured at the critical micelle concentration (cmc) is observed to be significantly lower than that of the corresponding monomeric surfactants. This suggests that the gemini surfactants, newly synthesized in the current study, are able to form a closely packed monolayer film at the air/aqueous solution interface. The greater ability in the molecular association is supported by the remarkably (approximately 100-200 times) lower cmc of the gemini surfactants compared with the corresponding monomeric ones. With a combination of the fluorescence and DLS data, a structural transformation of the Glu(n)-2-Glu(n) micelles is suggested to occur with an increase in the concentration. The cryo-TEM measurements clearly confirm the formation of worm-like micelles of Glu(12)-2-Glu(12) at the concentration well above the cmc.     

Determination of cyanide in blood by electrospray ionization tandem mass spectrometry after direct injection of dicyanogold

An electrospray ionization tandem mass spectrometric (ESI-MS-MS) method has been developed for the determination of cyanide (CN^–) in blood. Five microliters of blood was hemolyzed with 50 μL of water, then 5 μL of 1 M tetramethylammonium hydroxide solution was added to raise the pH of the hemolysate and to liberate CN^– from methemoglobin. CN^– was then reacted with NaAuCl₄ to produce dicyanogold, Au(CN)₂^–, that was extracted with 75 μL of methyl isobutyl ketone. Ten microliters of the extract was injected directly into an ESI-MS-MS instrument and quantification of CN^– was performed by selected reaction monitoring of the product ion CN^– at m/z 26, derived from the precursor ion Au(CN)₂^– at m/z 249. CN^– could be measured in the quantification range of 2.60 to 260 μg/L with the limit of detection at 0.56 μg/L in blood. This method was applied to the analysis of clinical samples and the concentrations of CN^– in the blood were as follows: 7.13 ± 2.41 μg/L for six healthy non-smokers, 3.08 ± 1.12 μg/L for six CO gas victims, 730 ± 867 μg for 21 house fire victims, and 3,030 ± 97 μg/L for a victim who ingested NaCN. The increase of CN^– in the blood of a victim who ingested NaN₃ was confirmed using MS-MS for the first time, and the concentrations of CN^– in the blood, gastric content and urine were 78.5 ± 5.5, 11.8 ± 0.5, and 11.4 ± 0.8 μg/L, respectively.     

Validated method using liquid chromatography-electrospray ionization tandem mass spectrometry for the determination of contamination of the exterior surface of vials containing platinum anticancer drugs

Contamination of the exterior surface of vials of cytostatic drugs by the drugs themselves is a potential hazard to human health. This study developed a validated method using liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS) for the determination of contamination of the exteriors of vials of cisplatin and carboplatin. Large Alpha^® sampling swabs were employed to wipe the vial exterior. Cisplatin or carboplatin and gold(III) as an internal standard were derivatized by N,N-diethyldithiocarbamate (DDTC). Pt(DDTC)₃⁺ and Au(DDTC)₂⁺ were monitored by the respective transitions of m/z 639.3-490.9 and 493.0-345.0, respectively. Each separation was completed within 9 min using a 3 μm particle ODS-column. Calibration curves for cisplatin and carboplatin were linear over concentration ranges of 30-10,000 and 30-30,000 pg vial⁻¹, respectively. The accuracies and precisions were 96.1-102.5% and within 8.2% for intra-assay and 99.6-103.3% and within 7.6% for inter-assay, respectively. Their lower limit of quantification was 30 pg vial⁻¹. Amounts of 0.17-17.0 ng vial⁻¹ as cisplatin and 0.48-794 ng vial⁻¹ as carboplatin were detected from the exterior surface of the vials. This validated method using LC-ESI-MS/MS for the determination of platinum anticancer drugs is helpful for monitoring contamination of the exterior surface of drug vials.     

Palladium-catalyzed stereospecific 1,4-hydrogen migration of cis-cyclohex-2-en-1,4-diol systems

It has been revealed that the generation of 2-cyclohexenones from cis-1,4-dihydroxycyclohexene derivatives under PdCl₂(PPh₃)₂-HCO₂NH₄ system takes place in an intramolecular pathway involving unprecedented mode of suprafacial 1,4-hydrogen migration across the 1,4-allylic centers.     

Preparation of poly(p‐oxybenzoyl) crystals using direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides

Poly(p‐oxybenzoyl) (POB) crystals were prepared by reaction‐induced crystallization during direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides. Polymerizations were carried out at 300 °C in dibenzyltoluene at a concentration of 1% with three kinds of anhydrides of boronic acid such as 3,4,5‐trifluorophenylboronic acid (TFB), 4‐methoxyphenylboronic acid (MPB) and 4‐biphenylboronic acid (BPB). The POB crystals were formed as precipitates in the solution and the morphology was considerably influenced by both the structure of the boronic anhydride and its concentration (c_B). Needle‐like crystals were firmed in the presence of TFB anhydride (TFBA) at c_Bs of 5 and 10 mol % by the spiral growth of lamellae. Spherical aggregates of slab‐like crystals were formed at c_Bs from 50 to 100 mol %. The polymerization with MPB anhydride and BPB anhydride (BPBA) also yielded the needle‐like crystals at c_Bs of 50 and 5 mol %, respectively. The polymerization with TFBA at lower c_B was favorable to prepare the needle‐like crystal. Molecular weight was also influenced by the structure of the boronic anhydride and c_B. M_n increased generally with c_B and BPBA gave the highest M_n of 14.7 × 10³ at c_B of 100 mol %. The loose packing of the molecules in the crystal caused by the bulkiness of the end‐groups made the polymerization in the crystals more efficiently. Morphology and molecular weight of the POB crystals could be controlled by the chemical structure and the content of boronic anhydride. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.