Synthesis of maremycins A and D1 via cycloaddition of a nitrone with (E)-3-ethylidene-1-methylindolin-2-one

A concise synthesis of maremycins A and D1 has been accomplished via cycloaddition of a chiral cyclic nitrone with ( E)-3-ethylidene-1-methylindolin-2-one as a key step. This synthesis clarifies the stereochemistry of the maremycins and is suitable for large-scale synthesis for biological screening.     

Interaction forces between poly(amidoamine) (PAMAM) dendrimers adsorbed on gold surfaces

Interaction forces between two gold surfaces with adsorbed poly(amidoamine) (PAMAM) dendrimers (generations G3.0 and G5.0) have been investigated using colloidal probe atomic force microscopy (AFM). In the absence of dendrimers or at their low concentrations, an attractive force derived from the van der Waals interaction was observed. On the other hand, this attractive interaction changed to repulsion with increasing dendrimer concentration. The origin of the repulsion can be attributed to either an electric double layer interaction or a steric effect of the adsorbed dendrimers, depending on the concentration of dendrimer. The steric hindrance was also influenced by the generation of the dendrimer; the force-detectable distance in the presence of PAMAM G5.0 dendrimer was slightly longer than that in the presence of G3.0 dendrimer. In order to estimate the occupied area of each dendrimer adsorbed on gold, quartz crystal microbalance (QCM) measurement was also carried out.     

Structural and electronic differences of copper(I) complexes with tris(pyrazolyl)methane and hydrotris(pyrazolyl)borate ligands

Copper(I) complexes with tripodal nitrogen-containing neutral ligands such as tris(3,5-diisopropyl-1-pyrazolyl)methane (L1') and tris(3-tertiary-butyl-5-isopropyl-1-pyrazolyl)methane (L3'), and with corresponding anionic ligands such as hydrotris(3,5-diisopropyl-1-pyrazolyl)borate (L1-) and hydrotris(3-tertiary-butyl-5-isopropyl-1-pyrazolyl)borate (L3-) were synthesized and structurally characterized. Copper(I) complexes [Cu(L1')Cl] (1), [Cu(L1')(OClO3)] (2), [Cu(L1')(NCMe)](PF6) (3a), [Cu(L1')(NCMe)](ClO4) (3b), [Cu(L1')(CO)](PF6) (4a), and [Cu(L1')(CO)](ClO4) (4b) were prepared using the ligand L1'. Copper(I) complexes [Cu(L3')Cl] (5) and [Cu(L3')(NCMe)](PF6) (6) with the ligand L3' were also synthesized. Copper(I) complexes [Cu(L1)(NCMe)] (7) and [Cu(L1)(CO)] (8) were prepared using the anionic ligand L1-. Finally, copper(I) complexes with anionic ligand L3- and acetonitrile (9) and carbon monoxide (10) were synthesized. The complexes obtained were fully characterized by IR, far-IR, 1H NMR, and 13C NMR spectroscopy. The structures of both ligands, L1' and L3', and of complexes 1, 2, 3a, 3b, 4a, 4b, 5, 6, 7, and 10 were determined by X-ray crystallography. The effects of the differences in (a) the fourth ligand and the counteranion, (b) the steric hindrance at the third position of the pyrazolyl rings, and most importantly, (c) the charge of the N3 type ligands, on the structures, spectroscopic properties, and reactivities of the copper(I) complexes are discussed. The observed differences in the reactivities toward O2 of the copper(I) acetonitrile complexes are traced back to differences in the oxidation potentials determined by cyclic voltammetry. A special focus is set on the carbonyl complexes, where the 13C NMR and vibrational data are presented. Density functional theory (DFT) calculations are used to shed light on the differences in CO bonding in the compounds with neutral and anionic N3 ligands. In correlation with the vibrational and electrochemical data of these complexes, it is demonstrated that the C-O stretching vibration is a sensitive probe for the "electron richness" of copper(I) in these compounds.     

Preparation of monodispersed vinylpyridine–divinylbenzene porous copolymer resins and their application to high-performance liquid chromatographic separation of aromatic amines

For the separation of aromatic amines, two types of monodispersed porous polymer resins were prepared by the copolymerization of 2-vinylpyridine and 4-vinylpyridine with divinylbenzene in the presence of template silica gel particles (particle size 5 μm), followed by dissolution of the template silica gel in an alkaline solution. The transmission electron micrographs and the scanning electron micrograph revealed that these templated polymer resins have a spherical morphology with a good monodispersity and porous structure. Using these monodispersed polymer resins, the high-performance liquid chromatographic separation of aromatic amines in the mobile phases of pHs 2.0, 2.9, 4.1, 7.2 and 11.7 were carried out. The 2-vinylpyridine–divinylbenzene copolymer resins showed slightly stronger retentions for aromatic amines than the 4-vinylpyridine–divinylbenzene copolymer resins. Under acidic conditions (around pH 2.0), aniline and the toluidines showed no retention on these copolymer resins due to the repulsion between the cationic forms of these amines and pyridinium cations in the stationary phase, whereas less basic aromatic amines or non-basic acetanilide showed slight retentions. Above pH 4.1, the separation of aromatic amines with these polymer resins showed a typical reversed-phase mode separation. Therefore, the separation patterns of aromatic amines are effectively tunable by changing the pH value of the mobile phases. A good separation of eight aromatic amines was achieved at pH 2.9 using the 2-vinylpyridine–divinylbenzene copolymer resins.     

Metal ions dramatically enhance the enantioselectivity for lipase-catalysed reactions in organic solvents

We propose a simple and a powerful method to enhance the enantioselectivity for lipase-catalysed transformations in organic solvents by an addition of metal ion-containing water to the reaction mixture. In this paper, various metal ions such as LiCl or MgCl2 are tested to improve the enantioselectivity for the model reactions. The enantioselectivities obtained are dramatically enhanced, the E values of which are about 100-fold as compared with the ordinary conditions without a metal ion, for example, E = 200 by addition of LiCl. Furthermore, lowering the reaction temperature led to an almost perfect enantioselectivity of lipase in the presence of a metal ion, for example, E = 1,300 by addition of LiCl. Also, a mechanism for the drastic enhancement by metal ions is discussed briefly on the basis of the EPR spectroscopic study and the initial rate for each enantiomer of the substrate.     

Stereocontrol in radical polymerization

The stereospecific radical polymerization of vinyl esters, methacrylates, and alpha-substituted acrylates was studied. Fluoroalcohols, as a solvent, have remarkable effects on the stereoregularity of the radical polymerizations of vinyl acetate, vinyl pivalate, and vinyl benzoate, affording polymers rich in syndiotacticity, heterotacticity, and isotacticity, respectively. This method was successfully applied to the polymerization of methacrylates to give syndiotactic polymers. The steric repulsion between the entering monomer and the chain-end monomeric unit bound by the solvent through hydrogen bonding is important for the stereochemical control in these systems. Lewis acid catalysts, such as lanthanide trifluoromethanesulfonates and zinc salts, were also effective for the stereocontrol during the radical polymerization of methyl methacrylate, to reduce the syndiotacticity and alpha-(alkoxymethyl)acrylates to synthesize isotactic and syndiotactic polymers. Radical polymerization of the methacrylates bearing a bulky ester group, such as the triphenylmethyl methacrylate derivatives, gave highly isotactic polymers, as in the case of anionic polymerization. In addition, the control of one-handed helical conformation was attained in the radical polymerization of 1-phenyldibenzosuberyl methacrylate using chiral neomenthanethiol or cobalt(II) complexes as an additive.     

Carbonyl reduction with CaH2 and R3SiCl catalyzed by ZnCl2

Ketones and aldehydes were effectively reduced to the corresponding alcohols (or their silyl ethers) by the reaction with CaH₂ and R₃SiCl in the presence of a catalytic amount of ZnCl₂. In the absence of the carbonyl substrate, the reagent reduced R₃SiCl to the corresponding hydrosilane under mild reaction conditions.     

Biosynthetic Conclusions from the Functional Dissection of Oxygenases for Biosynthesis of Actinorhodin and Related Streptomyces Antibiotics

1. Download : Download high-res image (332KB)
2. Download : Download full-size image

Highlights? ActVA-ORF5 is a flavin-dependent monooxygenase required for actinorhodin biosynthesis ? ActVA-ORF5 and its three close homologs were functionally dissected ? ActVA-ORF5 and Gra-21 are bifunctional at C-6/C-8, while Med-7 acts only for C-6 ? AlnT exhibits different regiospecificity for oxidation of tricyclic substrates     

Immobilization of polysaccharide derivatives onto silica gel Facile synthesis of chiral packing materials by means of intermolecular polycondensation of triethoxysilyl groups

The 3,5-dimethylphenylcarbamates of cellulose and amylose bearing a small amount of 3-(triethoxysilyl)propyl residues were synthesized by a simple process and efficiently immobilized onto a silica gel support by intermolecular polycondensation of the triethoxysilyl groups. The obtained chiral packing materials (CPMs) were evaluated by high-performance liquid chromatography. The polysaccharide derivatives containing about 1-2% of the 3-(triethoxysilyl)propyl residue were efficiently immobilized with a high chiral recognition. The immobilized CPMs could be used with the eluents containing chloroform and tetrahydrofuran, which cannot be used with the conventional coated-type CPMs. By using these eluents, the chiral recognitions for many racemates could be improved.