Interaction and arrangement of nitrogen and carbon atoms in fcc γ-iron

A Mössbauer effect measurement has been done for Fe?N, Fe?Al?C and Fe?Ni?C austenite in order to study the interaction between the interstitial atoms and their distribution among the octahedral sites of the fcc lattice, together with the influence of Al and Ni atoms. The spectra for Fe?N and Fe?Al?C austenite are decomposed into three components; one singlet γ₀, and two sets of doublet γ₁ and γ₂, with different quadrupole splittings, while no γ₂ component is found in the spectrum for Fe?Ni?C. By analyzing the component ratio in each spectrum, it is concluded that, in Fe?N and Fe?Al?C, the interaction between 2nd nearest neighboring nitrogen or carbon atoms is attractive, and is repulsive between 1st nearest for Fe?N, and that the interaction between 2nd nearest atoms is repulsive for Fe?Ni?C. By measuring the spectra of Fe?Ni?C in magnetic field, the sign of EFG for most of the γ₁ component is determined to be negative.     

Residual stresses and warp generated by one-sided quench of an epoxy-resin beam

This paper discusses the warp and accompanying residual stress in a rectangular epoxy beam produced by water cooling its lower surface. First, the theoretical values of this warp and residual stress are obtained by the linear-viscoelastic theory. The specimen is then subjected to quenching. The variations in the warp are observed. After quenching, the residual stress is measured by a layer-removal method. The experimental and theoretical results are then compared and discussed.     

Validated method using liquid chromatography-electrospray ionization tandem mass spectrometry for the determination of contamination of the exterior surface of vials containing platinum anticancer drugs

Contamination of the exterior surface of vials of cytostatic drugs by the drugs themselves is a potential hazard to human health. This study developed a validated method using liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS) for the determination of contamination of the exteriors of vials of cisplatin and carboplatin. Large Alpha^® sampling swabs were employed to wipe the vial exterior. Cisplatin or carboplatin and gold(III) as an internal standard were derivatized by N,N-diethyldithiocarbamate (DDTC). Pt(DDTC)₃⁺ and Au(DDTC)₂⁺ were monitored by the respective transitions of m/z 639.3-490.9 and 493.0-345.0, respectively. Each separation was completed within 9 min using a 3 μm particle ODS-column. Calibration curves for cisplatin and carboplatin were linear over concentration ranges of 30-10,000 and 30-30,000 pg vial⁻¹, respectively. The accuracies and precisions were 96.1-102.5% and within 8.2% for intra-assay and 99.6-103.3% and within 7.6% for inter-assay, respectively. Their lower limit of quantification was 30 pg vial⁻¹. Amounts of 0.17-17.0 ng vial⁻¹ as cisplatin and 0.48-794 ng vial⁻¹ as carboplatin were detected from the exterior surface of the vials. This validated method using LC-ESI-MS/MS for the determination of platinum anticancer drugs is helpful for monitoring contamination of the exterior surface of drug vials.     

Determination of cyanide in blood by electrospray ionization tandem mass spectrometry after direct injection of dicyanogold

An electrospray ionization tandem mass spectrometric (ESI-MS-MS) method has been developed for the determination of cyanide (CN^–) in blood. Five microliters of blood was hemolyzed with 50 μL of water, then 5 μL of 1 M tetramethylammonium hydroxide solution was added to raise the pH of the hemolysate and to liberate CN^– from methemoglobin. CN^– was then reacted with NaAuCl₄ to produce dicyanogold, Au(CN)₂^–, that was extracted with 75 μL of methyl isobutyl ketone. Ten microliters of the extract was injected directly into an ESI-MS-MS instrument and quantification of CN^– was performed by selected reaction monitoring of the product ion CN^– at m/z 26, derived from the precursor ion Au(CN)₂^– at m/z 249. CN^– could be measured in the quantification range of 2.60 to 260 μg/L with the limit of detection at 0.56 μg/L in blood. This method was applied to the analysis of clinical samples and the concentrations of CN^– in the blood were as follows: 7.13 ± 2.41 μg/L for six healthy non-smokers, 3.08 ± 1.12 μg/L for six CO gas victims, 730 ± 867 μg for 21 house fire victims, and 3,030 ± 97 μg/L for a victim who ingested NaCN. The increase of CN^– in the blood of a victim who ingested NaN₃ was confirmed using MS-MS for the first time, and the concentrations of CN^– in the blood, gastric content and urine were 78.5 ± 5.5, 11.8 ± 0.5, and 11.4 ± 0.8 μg/L, respectively.     

Palladium-catalyzed stereospecific 1,4-hydrogen migration of cis-cyclohex-2-en-1,4-diol systems

It has been revealed that the generation of 2-cyclohexenones from cis-1,4-dihydroxycyclohexene derivatives under PdCl₂(PPh₃)₂-HCO₂NH₄ system takes place in an intramolecular pathway involving unprecedented mode of suprafacial 1,4-hydrogen migration across the 1,4-allylic centers.     

Determination of tin by resin-suspension electrothermal atomic absorption spectrometry after enrichment as the complex with ammonium pyrrolidinedithiocarbamate.

A resin-phase extraction method has been optimized for the trace determination of tin(II) by ETAAS. Tin(II) was extracted on a finely divided anion exchange resin as the complex with ammonium pyrrolidinedithiocarbamate (APDC). The resin was collected on a membrane filter and then dispersed in 1.00 ml of 1 mol l(-1) nitric acid containing 100 microg of Pd(II) and 60 microg of Ni(II). The resulting resin suspension was subjected to GFAAS. The proposed method was applied to the determination of tin(II) in hydrochloric acid.     

Nonstoichiometric polycondensation of 4‐acetoxybenzoic acid in the presence of monoacetate

Nonstoichiometric polycondensation of 4‐acetoxybenzoic acid (ABA) was examined in the presence of three kinds of aromatic monoacetates: 4‐hexyloxyphenyl acetate, 4‐decyloxyphenyl acetate, and 4‐octadecyloxyphenyl acetate. Polymerizations were carried out in liquid paraffin at 320 °C under nonstoichiometric conditions, in which the acetoxy group was in large excess of the carboxyl group. Poly(4‐oxybenzoyl) (POB) was obtained as crystal at the molar ratio of monoacetates in feed (χ) of less than 80 mol %, meaning that the concentration of the acetoxy group was five times that of the carboxylic group. The obtained POB possessed much higher number average degree of polymerization (DP_n), ranging from 353 to 467, than the calculated DP_n on the basis of χ. High molecular weight polymer was synthesized even under nonstoichiometric conditions via crystallization of oligomers and the following solid‐state polymerization in the crystals. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1757–1766, 2005     

Invariance of selfinjective algebras of quasitilted type under stable equivalences

We prove that the class of finite dimensional selfinjective algebras over a field which admit Galois coverings by the repetitive algebras of the quasitilted algebras, with Galois groups generated by compositions of the Nakayama automorphisms with strictly positive automorphisms, is invariant under stable and derived equivalences. Dedicated to Claus Michael Ringel on the occasion of his sixtieth birthday