Photolysis of tris(trimethylsilyl)-phenylsilane in alcohols: A consecutive generation of sililene species

Photolysis of tris(trimethylsilyl)phenylsilane, in alcohols yielded 1-aikoxy-1-phenyl-2, 2,2-trimethyldisilane, dialkoxyphenylsilane, hexamethyldistlane, and trimethylstlane as major products. The formation of the products was explained by a mechanssm which included the consecutive generatinn of phenyltrimethylsilylsilyleses and alkoxyphenylsilylenes.     

Colloid chemical studies of polystyrene latices polymerized without any surface-active agents

Summary The influence of secondary minimum for the stability of spherical colloid has been studied using a series of soap-free polystyrene latices from 350 m to 1400 m in diameter.The critical flocculation concentration (c. f. c.) and the zeta-potential at the c. f. c. for each latex were determined with several salts of different ionic valencies. The values of c. f. c. varied with the particle size, reaching a maximum value at 750 m and then decreasing gradually with the diameter.Another phenomenon detected in the experiment was the complete reversibility of coagulation which was observed only in the cases of large size latices, i. e., the coagulates of large size particles were fully redispersed in the solution by stirring. The time-dependence of their sedimentation curves was reproducible.These experimental results could not be explained by the simple theoretical consideration for stability of suspension. The satisfactory explanation is given only using the term of secondary minimum of interaction potential, i. e., the origin of coagulation was shifted from the ordinary primary minimum to the shallow secondary minimum at about 750 m of the particle diameter.

---

Zusammenfassung Der Einfluß des Sekundär-Minimum auf die Stabilität von Kolloiden wurde an seifenfreien Polystyrol-Latex-Suspensionen mit einem Durchmesser von 350 m bis 1400 m untersucht. Die kritische Flockungskonzentration (c. f. c.) und das Zeta-Potential bei c. f. c. wurde mit verschiedenen Salzen bestimmt.Der Wert von c. f. c. ändert sich mit der Teilchengröße.Ein weiterer wichtiger experimenteller Befund ist die vollständige Reversibilität der Flockung bei größeren Latices.Derartige Versuchsergebnisse können durch das Sekundär-Minimum befriedigend erklärt werden.

---

---

With 7 figures in 10 details and 2 tables     

[a,b]-factorization of a graph

Let a and b be integers such that 0 ? a ? b. Then a graph G is called an [a, b]-graph if a ? d_G(x) ? b for every x ? V(G), and an [a, b]-factor of a graph is defined to be its spanning subgraph F such that a ? d_F(x) ? b for every vertex x, where d_G(x) and d_F(x) denote the degrees of x in G and F, respectively. If the edges of a graph can be decomposed into [a.b]-factors then we say that the graph is [2a, 2a]-factorable. We prove the following two theorems: (i) a graph G is [2a, 2b)-factorable if and only if G is a [2am,2bm]-graph for some integer m, and (ii) every [8m + 2k, 10m + 2k]-graph is [1,2]-factorable.     

Enantioselective acylation of secondary alcohols catalyzed by chiral N-heterocyclic carbenes

[reaction: see text] The synthetic utility of chiral N-heterocyclic carbenes, which have been used mainly in transition metal-catalyzed reactions as a ligand, was demonstrated by the enantioselective acylation of secondary alcohols.     

Helical gold nanotube synthesized at 150 K

Gold nanowires were synthesized at 150 K by electron beam thinning of a gold thin foil in an UHV electron microscope. The gold nanowires were found to have a helical multishell structure (HMS). One particular nanowire, which was thinner than the 7-1 HMS nanowire, was found to have a tubular structure. The gold single wall nanotube is composed of five atomic rows that coil about the tube axis. The diameter was 0.4 nm and the pitch was 11 nm. The stability of the (5,3) nanotube was discussed in terms of the shear deformation of the triangular network of gold atoms.     

Polyacrylamides as hydrophilic selectors in non-aqueous capillary electrophoresis

Polyacrylamides (PAAms) were investigated as hydrophilic selectors in non-aqueous capillary electrophoresis (CE). Separation of 10 substituted benzoates and unsubstituted benzoate as model samples was greatly improved by the addition of PAAms in acetonitrile-CE. The migration behavior indicates that the carbonyl moiety of PAAms works as a good hydrogen-accepting site toward hydrogen-donating analytes such as 4-hydroxybenzoate anion (4OH-BA) in acetonitrile. PAAms also serve as electron-accepting agents with its amide proton interacting with the dissociated carboxyl groups of the benzoates. The ion-dipole interaction is useful to control the migration behavior of benzoates without hydrogen-donating substituents. The overall mode of the interaction is similar to that of polyethylene glycol (PEG) 20000 reported previously, but the complex formation constant of poly(N-tert.-butyl)acrylamide (PBAAm) with 40H-BA estimated here was 130-fold larger than that of PEG 20000. This would be ascribed to the strong basicity of the carbonyl oxygen atoms of PBAAm as compared with the ether oxygen atoms of PEG. Furthermore, a copolymer of (N-tert.-butyl)acrylamide-acrylamide [70:30 (in feed)] exhibited a complex formation constant of about fourfold larger toward 4OH-BA than PBAAm, most probably due to decrease in steric hindrance from the tert.-butyl groups. Adrenaline and its six precursors have been separated successfully using the PAAms.     

Wave packet dynamics in a quasi-one-dimensional metal-halogen complex studied by ultrafast time-resolved spectroscopy

An ultrafast optical response is studied in a quasi-one-dimensional halogen-bridged mixed-valence metal complex [Pt(en)(2)] [Pt(en)2I2] (ClO4)(4) with ultrafast time resolution. Wave packet motions both in the ground and self-trapped exciton (STE) states are observed as oscillatory modulations in the time-resolved reflectivity. The wave packet motion on the STE potential surface begins after about 50 fs with respect to the photoexcitation. This delay is attributed to the lattice relaxation from the free exciton state to the STE state.     

Application of Dithlol-s-triazine Derivatives to PVC CrossUnking

The effects of crosslinking on PVC are well known in regard to the improvement of mechanical properties, creep behavior, and softening temperature. Little is known, however, on the application of the PVC-crosslinking reaction, because most of crosslinked PVC tends to color easily at elevated temperatures. In this paper, a novel PVC-crosslinking reaction with 2-R-4,6-dithiol-s-triazine (I) has been presented to obtain insoluble products which hardly color on ageing. The reaction rate and induction period of the crosslinking reaction with I are made controllable by selecting the basicity of the substituent R of I as well as that of an acid acceptor in the blends. The utility of I as stabilizer as well as a crosslinking agent is also emphasized.     

Selective synthesis of poly(p‐oxybenzoyl) by fractional polycondensation: Enhancement of selectivity by shearing

The influence of shear flow, especially the timing for the application of shearing, was examined to enhance the selectivity for the preparation of poly(p‐oxybenzoyl) (Pp‐OB) by using hydrodynamically induced phase separation during polymerization of 4‐(4‐acetoxybenzoyloxy)benzoic acid (p‐ABAD) and m‐acetoxybenzoic acid (m‐ABA). The polymers containing few m‐oxybenzoyl (m‐OB) moieties were obtained as precipitates even at high content of m‐OB moiety in feed (χ_f) under shear flow. The content of m‐OB moiety in the precipitates (χ_p) prepared under shearing throughout the polymerization at the shear rate (γ) of 489 s^?1 was 6.3 mol % even at χ_f of 60 mol %. Especially, the Pp‐OB was obtained as the precipitates at χ_f of less than 50 mol %. The timing of the application of the shearing influenced the selectivity significantly, and the shearing just after the precipitation of the oligomers started was quite efficient to enhance the selectivity more. The χ_p of the precipitates prepared with shearing at γ of 489 s^?1 just after the precipitation was only 3.9 mol % even at χ_f of 60 mol %. The shear flow reduced the difference in the reactivity between p‐ABAD and m‐ABA, resulting in the decrease in the selectivity with regard to the formation of p‐oxybenzoyl homo‐oligomer. However, the shear flow enhanced the difference in the miscibility between homo‐oligomers and co‐oligomers. This change in the miscibility by shear flow brought about the more rapid precipitation of homo‐oligomers, leading to the enhancement of the selectivity. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of poly(p‐oxybenzoyl) crystals using direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides

Poly(p‐oxybenzoyl) (POB) crystals were prepared by reaction‐induced crystallization during direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides. Polymerizations were carried out at 300 °C in dibenzyltoluene at a concentration of 1% with three kinds of anhydrides of boronic acid such as 3,4,5‐trifluorophenylboronic acid (TFB), 4‐methoxyphenylboronic acid (MPB) and 4‐biphenylboronic acid (BPB). The POB crystals were formed as precipitates in the solution and the morphology was considerably influenced by both the structure of the boronic anhydride and its concentration (c_B). Needle‐like crystals were firmed in the presence of TFB anhydride (TFBA) at c_Bs of 5 and 10 mol % by the spiral growth of lamellae. Spherical aggregates of slab‐like crystals were formed at c_Bs from 50 to 100 mol %. The polymerization with MPB anhydride and BPB anhydride (BPBA) also yielded the needle‐like crystals at c_Bs of 50 and 5 mol %, respectively. The polymerization with TFBA at lower c_B was favorable to prepare the needle‐like crystal. Molecular weight was also influenced by the structure of the boronic anhydride and c_B. M_n increased generally with c_B and BPBA gave the highest M_n of 14.7 × 10³ at c_B of 100 mol %. The loose packing of the molecules in the crystal caused by the bulkiness of the end‐groups made the polymerization in the crystals more efficiently. Morphology and molecular weight of the POB crystals could be controlled by the chemical structure and the content of boronic anhydride. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.