Polyether-bridged sexithiophene as a complexation-gated molecular wire for intramolecular photoinduced electron transfer

The porphyrin-sexithiophene-fullerene triad 2, where the two central thiophene units of the sexithiophene spacer are bridged with a crown-ether-like polyether chain, undergoes efficient intramolecular electron transfer from the photoexcited porphyrin moiety to the fullerene through the sexithiophene. However, complexation with a sodium cation in the crown ether ring causes complete suppression of electron transfer as a result of a drastic conformational change of the sexithiophene backbone. Furthermore, decomplexation resumes the photoinduced electron transfer. This on/off switching phenomenon indicates that the polyether-bridged sexithiophene can function as a complexation-gated molecular wire.     

Crystal structure of a methyl(methoxy)carbene complex of nickel(II), trans-[Ni(C6Cl5)(PMe2Ph)2{C(OMe)Me}]BF4

The structure of a nickel(II) complex, trans-[Ni(C₆Cl₅)(PMe₂Ph)₂{C(OMe)Me}]BF₄, containing the simplest alkyl(alkoxy)carbene ligand has been determined by X-ray crystallography (R = 0.091). The geometry around the nickel atom is square-planar. The comparatively short NiC(1) bond length of 1.843(10) Å showed the presence of π-bonding in the nickel-carbene bond.     

Morphological change of gold-dendrimer nanocomposites by laser irradiation

Gold-dendrimer nanocomposites are prepared in aqueous solutions in the presence of poly(amidoamine)dendrimers (PAMAM) (generation 3 and 5) or poly(propyleneimine)dendrimers (PPI) (generation 3 and 4) by wet chemical NaBH(4) method. Thus prepared gold-dendrimer nanocomposites are irradiated by laser at 532 nm. UV-vis absorption spectroscopy and transmission electron microscopy reveal that the gold nanoparticles grow with the laser irradiation time as well as the fluence of the laser; in particular, the gold nanoparticles prepared at lower concentrations of PAMAM dendrimer as well as lower generations of PAMAM grow significantly. On the other hand, in the case of PPI dendrimers, the gold nanoparticles hardly grow by irradiation. In addition, dynamic light-scattering measurements show that the laser irradiation markedly promotes the association of the gold-PAMAM G3 dendrimer nanocomposites compared to that of the gold-PAMAM G5 dendrimer nanocomposites, while the sizes of association for the gold-PPI G3, G4 dendrimer nanocomposites hardly change by laser irradiation.     

A distance-controlled oligopeptide linker as a novel photo-induced energy transfer switch by secondary structural transition

By using an oligopeptide chain as a functional linker and introducing coumarin 2 and coumarin 343 at the chain ends, an effective photo-induced energy transfer system was constructed and energy transfer from coumarin 2 to coumarin 343 was switched on and off by a solvent-induced helix-coil secondary transition of the oligopeptide chain.     

Effects of hydrogen bonding on metal ion-promoted intramolecular electron transfer and photoinduced electron transfer in a ferrocene-quinone dyad with a rigid amide spacer

A ferrocene-quinone dyad (Fc-Q) with a rigid amide spacer and Fc-(Me)Q dyad, in which the amide proton acting as a hydrogen-bonding acceptor is replaced by the methyl group, are employed to examine the effects of hydrogen bonding on both the thermal and the photoinduced electron-transfer reactions. The hydrogen bonding of the semiquinone radical anion with the amide proton in Fc-Q(.-) produced by the electron-transfer reduction of Fc-Q is indicated by the significant positive shift of the one-electron reduction potential of Fc-Q. The hyperfine coupling constants of Fc-Q(.-) also indicate the existence of hydrogen bonding, agreeing with those predicted by the density functional calculation. The hydrogen-bonding dynamics in the photoinduced electron transfer from the ferrocene (Fc) to the quinone moiety (Q) in Fc-Q have been successfully detected in the femtosecond laser flash photolysis experiments. Thermal intramolecular electron transfer from Fc to Q in Fc-Q and Fc-(Me)Q also occurs efficiently in the presence of metal ions in acetonitrile at 298 K. The hydrogen bond formed between the semiquinone radical anion and the amide proton in Fc-Q results in remarkable acceleration of the rate of metal ion-promoted electron transfer as compared to the rate of Fc-(Me)Q in which hydrogen bonding is prohibited. The metal ion-promoted electron-transfer rates are well correlated with the binding energies of superoxide ion-metal ion complexes, which are derived from the g(zz) values of the ESR spectra.     

Effect of pH on adsolubilization of single and binary organic solutes into a cationic hydrocarbon surfactant adsorbed layer on silica

The adsolubilization behaviors of 2-naphthol, biphenyl, and their binary solutes in the hexadecyltrimethyl ammonium bromide (HTAB) adsorbed layer formed on silica have been studied with solution pH. Two feed concentrations of HTAB are employed: 1.5 and 3.0 mmol dm(-3). At the feed concentration of 1.5 mmol dm(-3) HTAB, most of HTAB are adsorbed on the silica as a monolayer, while a bilayer formation occurs at the feed concentration of 3.0 mmol dm(-3). It is found that the adsolubilized amounts of respective single solutes increase with increasing solution pH except acidic region for biphenyl under a constant feed concentration of 2-naphthol (0.4 mmol dm(-3)) and biphenyl (0.047 mmol dm(-3)). The adsolubilization of binary solutes depends on the feed concentration of HTAB; at the low HTAB feed concentration, competitive adsolubilization between 2-naphthol and biphenyl occurs above pH 4.5, while at the high HTAB feed concentration the adsolubilization of biphenyl is enhanced by the incorporation of 2-naphthol over a whole pH region. These behaviors in the adsolubilization are discussed from the surfactant structure of HTAB adsorbed as well as the admicellar partitioning coefficients.     

Biodegradable Polyurethanes from Plant Components

Abstract

Polyurethane (PU) sheets and foams having plant components in their network were prepared by using the following procedure. Polyethylene glycol (PEG) was mixed with one of the following; molasses, lignin, woodmeal, or coffee grounds. The mixture obtained was reacted with diphenylmethane diisocyanate (MDI) at room temperature, and precured PUs were prepared. The precured PUs were heat-pressed and PU sheets were obtained. In order to make PU foam, the above mixture was reacted with MDI after the addition of plasticizer, surfactant (silicone oil), catalyst (di-n-butyltin dilaurate), and droplets of water under vigorous stirring. The glass transition temperature, tensile and compression strengths, and Young's modulus of the PU sheets and foams increased with an increasing amount of plant components. This suggests that saccharide and lignin residues act as hard segments in PUs. It was found that the PUs obtained were biodegradable in soil. The rate of biodegradation of the PUs derived from molasses and coffee grounds was between that of cryptomeria (Cryptomeria japonica) and beech (Fagus sieboldi).     

Synthesis of a “molecular rope curtain”: Preparation and characterization of a sliding graft copolymer with grafted poly(ethylene glycol) side chains by the “grafting onto” strategy

A sliding graft copolymer (SGC) with poly(ethylene glycol) (PEG) side chains was prepared by ester formation between terminal carboxyl groups of oxidized PEG methyl ether with molecular weight of 2000 (mPEG2000‐COOH) and hydroxyl groups of a polyrotaxane consisting of PEG and cyclodextrins (CDs). Formation of the SGC structure was confirmed by ¹H NMR, attenuated total reflectance Fourier‐transformed infrared, and gel permeation chromatography. The SGC was soluble in good solvents of PEG and insoluble in poor solvents of PEG. Estimation of the number of grafted mPEG chains suggested a “rope‐curtain” like structure, in which an mPEG chain is connected to each CD ring. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Response of ocean bottom dwellers exposed to underwater shock waves

The paper reports results of experiments to estimate the mortality of ocean bottom dwellers, ostracoda, against underwater shock wave exposures. This study is motivated to verify the possible survival of ocean bottom dwellers, foraminifera, from the devastating underwater shock waves induced mass extinction of marine creatures which took place at giant asteroid impact events. Ocean bottom dwellers under study were ostracoda, the replacement of foraminifera, we readily sampled from ocean bottoms. An analogue experiment was performed on a laboratory scale to estimate the domain and boundary of over-pressures at which marine creatures’ mortality occurs. Ostracods were exposed to underwater shock waves generated by the explosion of 100mg PETN pellets in a chamber at shock over-pressures ranging up to 44MPa. Pressure histories were measured simultaneously on 113 samples. We found that bottom dwellers were distinctively killed against overpressures of 12MPa and this value is much higher than the usual shock over-pressure threshold value for marine-creatures having lungs and balloons.