The molecular structure of chlorothiomethoxymethyl-bis(triphenylphosphine)palladium(II) methylenechloride solvate at −160°C

The precise molecular structure of [PdCl(CH₂SCH₃)(PPh₃)₂] has been determined from three-dimensional X-ray diffraction data collected at ?160°C. The CH₂Cl₂ solvated crystal ([PdCl(CH₂SCH₃)(PPh₃)₂ · CH₂Cl₂]) belongs to the monoclinic system, space group P2₁/n, with four formula units in a cell of dimensions: a 14.973(3), b 15.333(3), c 17.377(3) Å and β 115.77(1)° at ?160°C. The structure was solved by the conventional heavy atom method and refined by the least-squares procedure to R = 0.035 for observed reflections. The geometry around the palladium atom is square-planar. The phosphorus atoms of the two triphenylphosphine ligands are mutually trans. The CH₂SCH₃ group is bonded to the palladium atom only through the PdC σ-bond and the sulfur atom is not bonded to the metal atom (PdC(1) 2.061(3), SC(1) 1.796(3), SC(2) 1.817(5), Pd?S 2.973(1) Å, PdC(1)S 100.64(14)° and C(1)SC(2) 101.28(18)°). The structure is in contrast to that of [PdCl(CH₂SCH₃)(PPh₃)], in which both the carbon and sulfur atoms of the CH₂SCH₃ group are bonded to the palladium atom.     

Isomerization polymerization of β-propiolactones carrying side-chain ester groups

Based on our recent discovery of the isomerization polymerization of β-(2-acetoxyethyl)-β-propiolactone into poly-δ-ester,^1,2 we examined the generality of this phenomenon by using two related monomers. The catalysts were (EtAlO)_n and Et(ZnO)₂ZnEt. The side-chains in the monomers selected were the (CH₃)₂CHCOO? CH₂CH₂? (2) and (CH₃)CICHCOO? CH₂CH₂? (3) groups in which steric effects are almost identical but electronic effects are in opposition. The monomers yielded isomerized poly-δ-ester units, depending on the terminal substituent groups in the side-chain. These observations can be interpreted with the bicyclic intermediate proposed in the earlier work. Monomer (2) was reactive and produced a poly-δ-ester structure most readily, probably because of the higher electron density at the side-chain ester group which coordinated with the catalyst. In contrast, monomer (3) was less reactive, and the probability of isomerization was the lowest, i.e., the electron deficient side-chain ester group apparently interfered with the formation of the intermediate, especially in the Zn-catalysis. Equibinary random copolymers were prepared from (2) and (3) according to the catalyst and polymerization conditions chosen.     

Thermal rearrangements of allyl 2,2-dichlorovinyl and 1,2,2-trichlorovinyl sulfides

Unique rearrangements of allyl 2,2-dichlorovinyl and 1,2,2-trichlorovinyl sulfides have been found. On heating the former gave 1,2-dichloro-l,4-pentadienes and the latter 2,3-dichloro-5-chloromethyl-4,5-dihydrothiophenes and 3,5,6-trichloro-3,4-dihydro-2H-thiopyranes .     

A new synthesis of pyrroles by the condensation of cyclopropenes and nitriles mediated by gallium(III) and indium(III) salts

Gallium(III) and indium(III) halides were found to mediate the condensation of cyclopropenes and nitriles to give pyrrole derivatives in moderate yields. When excess nitrile was present, diazepine was also formed.     

Profiling and comprehensive expression analysis of ABC transporter solute-binding proteins of Bacillus subtilis membrane based on a proteomic approach

We analyzed ABC transporter solute-binding proteins (SBPs) of the Bacillus subtilis membrane using a proteomic approach. We prepared a washed cell membrane fraction that was insoluble in 134 mM nondetergent sulfobetaine and then extracted proteins using mixtures of detergents in a stepwise manner. The membrane proteins were resolved by three two-dimensional polyacrylamide gel electrophoresis (2-D PAGE) or two one-dimensional (1-D) PAGE procedures, electroblotted, and digested in the presence of 5% or 80% acetonitrile. Thereafter, matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (MALDI-TOF MS) identified 637 proteins corresponding to 15.9% of the total cellular proteins. We predicted that among these, 256 were membrane proteins, 101 were lipoproteins or secretory proteins and 280 were soluble proteins containing peripheral proteins that function in both the cytoplasm and the cell membrane such as SecA and FtsY. Among the 637 proteins, we identified 30 SBPs among 38 importers predicted by a bioinformatic search of the genome. We confirmed expression of the genes for the 30 SBPs using DNA microarray analysis. We compared the 2-D gel separation profiles of submembrane fractions solubilized by 1% n-dodecyl-beta-D-maltoside from cells cultured on Luria Bertani (LB), S7, and S7 medium without glutamate as well as DNA microarray data on LB and S7. The results suggested that YcdH, YtmK and YurO are binding proteins for Mn(++), glutamate and glucose, respectively, and that YqiX and YxeM are binding proteins for amino acids (tryptophan in S7 medium).     

m-Diethynylbenzene macrocycles: syntheses and self-association behavior in solution

m-Diethynylbenzene macrocycles (DBMs), buta-1,3-diyne-bridged [4(n)]metacyclophanes, have been synthesized and their self-association behaviors in solution were investigated. Cyclic tetramers, hexamers, and octamers of DBMs having exo-annular octyl, hexadecyl, and 3,6,9-trioxadecyl ester groups were prepared by intermolecular oxidative coupling of dimer units or intramolecular cyclization of the corresponding open-chain oligomers. The aggregation properties were investigated by two methods, the (1)H NMR spectra and the vapor pressure osmometry (VPO). Although some discrepancies were observed between the association constants obtained from the two methods, the qualitative view was consistent with each other. The analysis of self-aggregation by VPO revealed unique aggregation behavior of DBMs in acetone and toluene, which was not elucidated by the NMR method. Namely, the association constants for infinite association are several times larger than the dimerization constant, suggesting that the aggregation is enhanced by the formation of dimers (a nucleation mechanism). In polar solvents, DBMs aggregate more strongly than in chloroform due to the solvophobic interactions between the macrocyclic framework and the solvents. Moreover, DBMs self-associate in aromatic solvents such as toluene and o-xylene more readily than in chloroform. In particular, the hexameric DBM having a large macrocyclic cavity exhibits extremely large association constants in aromatic solvents. By comparing the aggregation properties of DBMs with the corresponding acyclic oligomers, the effect of the macrocyclic structure on the aggregation propensity was clarified. Finally, it turned out that DBMs tend to aggregate more readily than the corresponding phenylacetylene macrocycles, acetylene-bridged [2(n)]metacyclophanes, owing to the withdrawal of the electron density from the aromatic rings by the butadiyne linkages which facilitates pi-pi stacking interactions.     

Depletion flocculation of latex dispersion in ionic micellar systems

The flocculation behavior of anionic and cationic latex dispersions induced by addition of ionic surfactants with different polarities (SDS and cetyltrimethylammonium bromide (CTAB)) have been evaluated by rheological measurements. It was found that in identical polar surfactant systems with particle surfaces of SDS + anionic lattices and CTAB + cationic lattices, a weak and reversible flocculation has been observed in a limited concentration region of surfactant, which was analyzed as a repletion flocculation induced by the volume-restriction effect of the surfactant micelles. On the other hand, in oppositely charged surfactant systems (SDS + cationic lattices and CTAB + anionic lattices), the particles were flocculated strongly in a low surfactant concentration region, which will be based on the charge neutralization and hydrophobic effects from the adsorbed surfactant molecules. After the particles stabilized by the electrostatic repulsion of adsorbed surfactant layers, the system viscosity shows a weak maximum again in a limited concentration region. This weak maximum was influenced by the shear rate and has a complete reversible character, which means that this weak flocculation will be due to the depletion effect from the free micelles after saturated adsorption.     

Starburst dendrimer-supported pseudostationary phases for electrokinetic chromatography

Pseudo-stationary phases for electrokinetic chromatography were prepared by the alkylation of starburst dendrimers (SBDs). The SBD-supported pseudo-stationary phase with dodecyl groups showed higher efficiency than short-akyl derivatives, and maintained the hydrophobic property inthe presence of methanol. The dodecyl-modified SBD provided wide migration time windows ar high methanol content to effect the separation of sixteen aromatic hydrocarbons, the priority pollutants designated by EPA, in 65% methanol. The selectivity of polymer-supported pseudo-stationary phase can be varied simply by changing the length of the alkyl groups. The dodecyl SBD showed relatively similar selectivity as sodium dodecyl culfate micelle, whereas short alkyl derivatives showed preference towards rigid and planar compounds based on the rigid and planar compounds based on the rigid polymer backbones. The selectivity of SBD-supported pseudo-stationary phases was dominated by the chain length of the alkyl groups, with the minor effect of the structure of the core and the generation of SBD where alkyl groups were attached.     

Synthesis of Indolones via Radical Cyclization of N‐(2‐Halogenoalkanoyl)‐Substituted Anilines

The radical reactions of N‐(2‐halogenoalkanoyl)‐substituted anilines (anilides) of type 1 have been investigated under various conditions. Treatment of compounds 1a – 1o with Bu₃SnH in the presence of (2,2′‐azobis(isobutyronitrile) (AIBN) afforded a mixture of the indolones (oxindoles) 2a – 2o and the reduction products 5a – 5o (Table 1). In contrast, the N‐unsubstituted anilides 1p – 1s, 1u , and 1v gave the corresponding reduction products exclusively (Table 1). Similar results were obtained by treatment of 1 with Ni powder (Table 2) or wth Et₃B (Table 3). Anilides with longer N‐(phenylalkyl) chains such as 6 and 7 were inert towards radical cyclization, with the exception of N‐benzyl‐2‐bromo‐N,2‐dimethylpropanamide ( 6b ), which, upon treatment with Ni powder in i‐PrOH, afforded the cyclized product 9b in low yield (Table 4). Upon irradiation, the extended anilides 6, 7, 10 , and 11 yielded the corresponding dehydrobromination products exclusively (Table 5).     

Redox-responsive molecular switches based on azoterpyridine-bridged Ru/Os complexes

Three new terpyridine-based dinuclear complexes, [(tpy)Ru(azotpy)Ru(tpy)]4+ (tpy = 2,2':6',2'-terpyridine, azotpy = bis[2,6-bis(2-pyridyl)-4-pyridyl]diazene), [(tpy)Os(azotpy)Os(tpy)]4+, and [(tpy)Ru(azotpy)Os(tpy)]4+ were prepared and their electrochemical and photophysical properties investigated. The bridging ligand, azotpy, in these complexes is reduced at less negative potentials than the unsubstituted tpy ligand. These complexes exhibit absorption bands due to the metal-to-ligand charge-transfer transitions both to the unsubstituted tpy ligand and the bridging azotpy ligand, the latter absorption being observed at the lower energy side of the former. These observations are consistent with the lower lying pi* level of the azotpy ligand than that of the tpy ligand. These complexes are nonluminescent, since the excited electron is trapped in this lower lying pi* level of the azotpy ligand in the excited state. Reduction of this bridging ligand by constant potential electrolysis renders the shape of absorption spectra for these complexes nearly identical to those of the parent complexes, [M(tpy)2]2+ (M = Ru, Os). In this reduced state, the homodinuclear Os complex becomes luminescent at room temperature, whereas the homodinuclear Ru complex becomes luminescent at 77 K, thus establishing their photoswitching behavior. The reduced heterodinuclear complex exhibits luminescence from the Os center, which is sensitized by the Ru center in the same molecule as evidenced by the excitation spectra. Thus, the intramolecular energy transfer can be switched on and off by the redox reaction of the bridging component.