Synthesis and applications of a novel supramolecular polymer network with multiple H‐bonded melamine pendants and uracil crosslinkers

A conjugated main‐chain copolymer ( PBT ) consisting of bithiazole, dithieno[3,2‐b:2′,3′‐d]pyrroles (DTP), and pendent melamine units was synthesized by Stille polymerization, which can be hydrogen‐bonded (H‐bonded) with proper molar amounts of bi‐functional π‐conjugated crosslinker F (i.e., two uracil motifs covalently attached to a fluorene core through triple bonds symmetrically) to develop a novel supramolecular polymer network ( PBT/F ). The effects of multiple H‐bonds on light harvesting capabilities, HOMO levels, and photovoltaic properties of polymer PBT and H‐bonded polymer network PBT/F are investigated. The formation of supramolecular polymer network ( PBT/F ) between PBT and F was confirmed by FTIR and XRD measurements. Because of the stronger light absorption, lower HOMO level, and higher crystallinity of H‐bonded polymer network PBT/F , the solar cell device containing PBT/F showed better photovoltaic properties than that containing polymer PBT . The preliminary results show that the solar cell device containing 1:1 weight ratio of PBT/F and [6,6]‐phenyl C₇₁ butyric acid methyl ester (PC₇₁BM) offers the best power conversion efficiency (PCE) value of 0.86% with a short‐circuit current density (J_sc) of 4.97 mA/cm², an open circuit voltage (V_oc) of 0.55 V, and a fill factor (FF) of 31.5%. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

One‐Pot Synthesis of Pomegranate‐Structured Fe3O4/Carbon Nanospheres‐Doped Graphene Aerogel for High‐Rate Lithium Ion Batteries

A unique hierarchically nanostructured composite of iron oxide/carbon (Fe₃O₄/C) nanospheres‐doped three‐dimensional (3D) graphene aerogel has been fabricated by a one‐pot hydrothermal strategy. In this novel nanostructured composite aerogel, uniform Fe₃O₄ nanocrystals (5–10 nm) are individually embedded in carbon nanospheres (ca. 50 nm) forming a pomegranate‐like structure. The carbon matrix suppresses the aggregation of Fe₃O₄ nanocrystals, avoids direct exposure of the encapsulated Fe₃O₄ to the electrolyte, and buffers the volume expansion. Meanwhile, the interconnected 3D graphene aerogel further serves to reinforce the structure of the Fe₃O₄/C nanospheres and enhances the electrical conductivity of the overall electrode. Therefore, the carbon matrix and the interconnected graphene network entrap the Fe₃O₄ nanocrystals such that their electrochemical function is retained even after fracture. This novel hierarchical aerogel structure delivers a long‐term stability of 634 mA h g^?1 over 1000 cycles at a high current density of 6 A g^?1 (7 C), and an excellent rate capability of 413 mA h g^?1 at 10 A g^?1 (11 C), thus exhibiting great potential as an anode composite structure for durable high‐rate lithium‐ion batteries.     

Ligand‐Functionalization of BPEI‐Coated YVO4:Bi3+,Eu3+ Nanophosphors for Tumor‐Cell‐Targeted Imaging Applications

In this study, surface‐functionalized, branched polyethylenimine (BPEI)‐modified YVO₄:Bi³⁺,Eu³⁺ nanocrystals (NCs) were successfully synthesized by a simple, rapid, solvent‐free hydrothermal method. The BPEI‐coated YVO₄:Bi³⁺,Eu³⁺ NCs with high crystallinity show broad‐band excitation in the λ=250 to 400 nm near‐ultraviolet (NUV) region and exhibit a sharp‐line emission band centered at λ=619 nm under excitation at λ=350 nm. The surface amino groups contributed by the capping agent, BPEI, not only improve the dispersibility and water/buffer stability of the BPEI‐coated YVO₄:Bi³⁺,Eu³⁺ NCs, but also provide a capability for specifically targeted biomolecule conjugation. Folic acid (FA) and epidermal growth factor (EGF) were further attached to the BPEI‐coated YVO₄:Bi³⁺,Eu³⁺ NCs and exhibited effective positioning of fluorescent NCs toward the targeted folate receptor overexpressed in HeLa cells or EGFR overexpressed in A431 cells with low cytotoxicity. These results demonstrate that the ligand‐functionalized, BPEI‐coated YVO₄:Bi³⁺, Eu³⁺ NCs show great potential as a new‐generation biological luminescent bioprobe for bioimaging applications. Moreover, the unique luminescence properties of BPEI‐coated YVO₄:Bi³⁺,Eu³⁺ NCs show potential to combine with a UVA photosensitizing drug to produce both detective and therapeutic effects for human skin cancer therapy.     

Preparation of Unconventional Dendrimers that Contain Rigid NH?Triazine Linkages and Peripheral tert‐Butyl Moieties for CO2‐Selective Adsorption

Three unconventional dendrimers that contained rigid NH? triazine linkages and peripheral tert‐butyl moieties were prepared by using a convergent approach and characterized by ¹H and ¹³C NMR spectroscopy, mass spectrometry, and elemental analysis. Based on a thermogravimetric analysis study, these dendrimers were observed to display thermal stability at about 300 °C. The NH? triazine moiety, which possessed protonated and proton‐free nitrogen sites (like the imidazole unit), displayed the capture of polarizable CO₂ molecules through hydrogen‐bond and/or dipole–quadrupole interactions. In addition, the adsorption of various amounts of CO₂ and N₂ at different pressures suggests that the dendritic pores, which arise from the stacking of the middle co‐planar and rim protuberant dendrimers, G _n ‐N～N‐G _n (n=1–3), either swell or shrink at high pressure, thus indicating that these dendrimers may have a breathing ability.     

Efficient cross polarization with simultaneous adiabatic frequency sweep on the source and target channels

In this work, we propose a new and efficient heteronuclear cross polarization scheme, in which adiabatic frequency sweeps from far off-resonance toward on-resonance are applied simultaneously on both the source and target spins. This technique, which we call as Simultaneous ADIabatic Spin-locking Cross Polarization (SADIS CP), is capable of efficiently locking both the source and target spins with moderate power even in the presence of large spectral distribution and fast relaxation. It is shown that by keeping the time-dependent Hartmann-Hahn mismatch minimal throughout the mixing period, polarization transfer can be accelerated. Experiments are demonstrated in a powder sample of L-alanine.     

Transesterification of Soybean Oil Catalyzed by Calcium Hydroxide which Obtained from Hydrolysis Reaction of Calcium Carbide

Calcium carbide residue (CCR) was investigated in transesterification reaction of triglycerides to determine its viability as a solid catalyst for biodiesel synthesis. Literature survey showed that CCR has never been studied as a solid catalyst in the transesterification of triglyceride. The scope of the study includes the effects of CCR calcination temperature, calcination time, the alcohol/oil molar ratio, the catalyst amount (wt % of oil) and the reaction time. The relationship between chemical composition and catalytic activity of waste cement was also investigated. These CCR catalysts, thermally activated at 600 °C, can give rise to fatty acid methyl esters (FAME) purity higher than 99.5%, after 3 h of reaction, when oil/methanol molar ratio of 1/12 and 1 wt % of the catalyst were employed. Application of CCR as catalyst for biodiesel production in this study may not only provide a cost‐effective and environment friendly way of recycling CCR waste but also reduce hopefully the cost of biodiesel production.     

Biotransformation-mediated synthesis of (1S)-1-(2,6-dichloro-3-fluorophenyl)ethanol in enantiomerically pure form

An efficient four-step biotransformation-mediated synthesis of (1S)-1-(2,6-dichloro-3-fluorophenyl)ethanol in enantiomerically pure form is described. This compound is a key intermediate required for the preparation of PF-2341066, a potent inhibitor of c-Met/ALK that is currently in clinical development. The described synthesis was used to manufacture 6 kg of the title compound and can also be employed to produce the corresponding (1R)-enantiomer.     

The nuclear reaction matrix

Different difinitions of the reaction matrix G appropriate to the calculation of nuclear structure are reviewed and discussed. Qualitative physical arguments are presented in support of a two-step calculation of the G-matrix for finite nuclei. In the first step the high-energy excitations are included using orthogonalized plane-wave intermediate states, and in the second step the low-energy excitations are added in, using harmonic oscillator intermediate states. Accurate calculations of G-matrix elements for nuclear structure calculations in the A ≈ 18 region are performed following this procedure and treating the Pauli exclusion operator Q_2ν by the method of Tsai and Kuo. The treatment of Q_2ν, the effect of the intermediate-state spectrum and the energy dependence of the reaction matrix are investigated in detail. The present matrix elements are compared with various matrix elements given in the literature. In particular, close agreement is obtained with the matrix elements calculated by Kuo and Brown using approximate methods.     

Synthesis and structure of a helical diindenophenanthrene with four congested phenyl substituents as a molecular spiral staircase

Treatment of 9 with potassium tert-butoxide produced 10 having a helical twist in a single operation. The X-ray structure of 10 shows that the four phenyl substituents are essentially parallel to one another but are virtually perpendicular to the helical axis of the diindenophenanthrene ring system. Viewing from the direction perpendicular to the helical axis, the structure of 10 resembles that of a segment of a spiral staircase having four parallel steps.