Theory on the optical-phonon Raman scattering in GaAs/AlAs heterostructures

A microscopic theory of Raman scattering by optical phonons in GaAs/GaAlAs heterostructures is worked out systematically, on the basis of recent advances in our knowledge of the electronic structure and the optical-phonon modes in superlattices and quantum wells. Theories have shown that specific features of the intermediate states are of special importance for a quantitative theory. Thus, the heavy and light hole mixing effect, and the angular momentum state of the four-component excitons, can play a decisive role in determining the predominant scattering channels. Special attention has been paid to the Frolich-interaction induced scattering, which is dipole forbidden in bulk materials but allowed in multiple quantum wells owing to the barrier penetration and the hole mixing. Based on the microscopic theory, explanations are provided for such experimental facts as the asymmetry between the incoming and the outgoing resonance, the line shape of Raman spectra and the features of two-phonon Raman scattering in quantum well systems.     

Synthesis, morphology and random laser action of ZnO nanostructures

Three-dimensional (3-D) ZnO random-wall nanostructures and one-dimensional (1-D) ZnO nanorods were prepared on silicon substrates by a simple solid-vapour phase thermal sublimation technique. Optical pumped random lasing has been observed in the ZnO random-wall arrays with a threshold intensity of 0.38 MW/cm² in the emission wavelength from 380 to 395 nm. The optical gain was attributed to the closed-loop scattering and light amplification of the ZnO random-wall. The experimental result suggests that the morphology of nanostructure is the key factor to effect random lasing.     

生活中的物理知识

日常生活中有许多家用电器与我们学习的知识有着密切关系，可是当学生遇到此类问题时，就不能正确解答因此在教学中应注意，利用生活中的实物分析物理问题会收到良好的效果。     

白光干涉条纹变密的原因探讨

讨论了在测定透明介质折射率的过程中彩色条纹变密的现象，并在其基础上分析其成因：一是由于媒质折射率加大；二是由于平形板介质平行度不好造成楔形的倾角变大，最后在实验中验证了理论结果。     

Strong visible PL from the nc-Si thin film by Ni silicide mediated crystallization

We studied the growth of nanocrystalline silicon (nc-Si) thin film exhibiting a strong room temperature photoluminescence (PL) at 1.81–2.003 eV. The amorphous silicon was crystallized by Ni silicide mediated crystallization (Ni SMC) and then Secco-etched to exhibit the PL. The PL peak energy and intensity increase with increasing the metal density on the a-Si because of the reduction in the grain size down to 2 nm. The photoluminescence energy and peak intensity depend strongly on the Secco etch time because the grain size is reduced by etching the grain boundaries.     

An algorithm for three-way data analysis that alternatively minimizes coupled vector (COV) resolution error and PARAFAC error.

A novel algorithm, alternatively minimizing coupled vector (COV) resolution error and PARAFAC error algorithm, is proposed in this paper. This algorithm can overcome the problem of slow convergence and is insensitive to the estimation of component number, such problems are unavoidable while using the traditional parallel factors analysis (PARAFAC) algorithm. In other words, this algorithm is capable of improving the computing speed and providing accurate resolutions provided that the number of factors used in the computation is no less than that of the actual underlying ones. The characteristic performances were demonstrated with a novel fluorescence data array.     

The structure of multi-electrode-pair pulse laser and discharge pulse time selection

Applying multi-electrode-pair pulse TEA CO₂ laser to one optical resonance cavity will have several advantages over traditional method, including higher gain, shorter pulse discharge time interval, and in particular, continuous adjustable time interval of multi-pulse laser output can be achieved without high vacuum condition. To improve laser's working stabilization, we proposed new approaches to optimize laser structure design and discharge pulse time interval selection.     

一种新颖的超结构光纤Bragg光栅梳状滤波器的设计

报道一种新颖的用于多波长光纤激光器的超结构光纤Bragg光栅（SFBG）梳状滤波器，其突出特点是仅由单个光栅构成、折射率调制和局部啁啾富于变化、反射峰均匀性好、窄带宽和标准的信道间隔.采用基于LP算法的IS光纤光栅设计技术，将整体加窗切趾法改进为各信道独立加窗切趾，成功地设计出所需的SFBG，同时对SFBG的制作技术也进行了探讨.用传输矩阵法分析反射谱、时延曲线和群时延抖动.结果表明，所设计的SFBG满足各项设计指标要求，在DWDM系统中，这种新颖的SFBG可望成为用于多波长光纤激光器的最理想的高性 能梳 关键词： 超结构光纤Bragg光栅 光栅设计 梳状滤波器     

CRYSTAL AND MOLECULAR STRUCTURE OF A NOVEL Au Ag SUPRACLUSTER COMPOUND [Au_13Ag_12(μ-Br)_4(μ_3-Br)_2(Ph_3P)_10-

<正> [Au13Ag12(μ-Br)1(μ3-Br)2 (Ph3P)10Br2] Br, monoclinic. space group C2/m, a = 36. 496(17). b=16. 878(7), c-=19. 772(9) A , β=99. 87(5)°, V=11998. 9 A3.Z=2. The final R(Rw) is 0. 097(0. 109) for 3779 reflections with I>3σ(I). The structure can he considered as two icosahedral cluster units (AurAg6) sharing one vertex and linked hy six bromine atoms. The Au - Au, Au - Ag. and Ag-Ag distances fall in the ranges of 2. 69-2. 96. 2. 84-3. 02. and 2. 92-3. 26 A, respectively.