Synchrotron radiation photoelectron spectroscopy and near-edge X-ray absorption fine structure study on oxidative etching of diamond-like carbon films by hyperthermal atomic oxygen

Surface structural changes of a hydrogenated diamond-like carbon (DLC) film exposed to a hyperthermal atomic oxygen beam were investigated by Rutherford backscattering spectroscopy (RBS), synchrotron radiation photoelectron spectroscopy (SR-PES), and near-edge X-ray absorption fine structure (NEXAFS). It was confirmed that the DLC surface was oxidized and etched by high-energy collisions of atomic oxygen. RBS and real-time mass-loss data showed a linear relationship between etching and atomic oxygen fluence. SR-PES data suggested that the oxide layer was restricted to the topmost surface of the DLC film. NEXAFS data were interpreted to mean that the sp² structure at the DLC surface was selectively etched by collisions with hyperthermal atomic oxygen, and an sp³-rich region remained at the topmost DLC surface. The formation of an sp³-rich layer at the DLC surface led to surface roughening and a reduced erosion yield relative to the pristine DLC surface.     

Control of hole opening in single-wall carbon nanotubes and single-wall carbon nanohorns using oxygen

Due to the simplicity of the process, holes in the graphene walls of single-wall carbon nanotubes (SWNTs) and single-wall carbon nanohorns (SWNHs) have often been opened using O2 gas at high temperatures, even though this contaminates the nanotubes with carbonaceous dust (C-dust). To open holes with less C-dust contamination, we found that a slow temperature increase of 1 degrees C/min or less, in air, was effective. We also found that SWNHs having little C-dust could store a large quantity of materials inside the tubes. We infer that the local temperature increase due to the exothermic reaction of combustion may have been suppressed in the slow combustion process, which was effective in reducing the C-dust.     

Sequential pericyclic reaction of ene-diallenes: an efficient approach to the steroid skeleton

[reaction: see text] The one-pot construction of polycyclic aromatic systems from acyclic ene-bis(propargyl alcohols) was achieved through a tandem dual [2,3]-sigmatropic rearrangement/6pi-electrocyclic reaction/intramolecular [4 + 2] cycloaddition sequence. A steroidal compound was conveniently synthesized using the present method.     

Ion storage in Kingdon trap

Abstract

The characteristics of stored ions in a Kingdon trap have been investigated. The charge distribution of stored ions was measured by a time of flight (TOF) mass spectrometer. Storage of Ar^q+ (q = 1, 2, 3, 4) produced by electron beam irradiation has been confirmed. The dependences of Ar ion yields on the trapping potential and storage time have been systematically studied.

Applying a voltage to end plates is very important for the storage of ions. Remarkable oscillations of the ion yields are found in the decay curves as a function of storage time for Ar⁺, Ar²⁺ and Ar³⁺ indicating periodical motion of each ion group about the central wire. The three dimensional orbits of ions in the trap are analysed by a computer calculation to understand the experimental results.     

Synthesis of Functionalized (η5‐Indenyl)rhodium(III) Complexes and Their Application to C−H Bond Functionalization

It has been established that reductive complexation of functionalized benzofulvenes, which are readily prepared from commercially available indene and 2‐methylindene, with RhCl₃ in ethanol affords the corresponding indenyl–rhodium(III) dichlorides bearing substituents at the 1‐ (H or CO₂Et), 2‐ (H or Me), and 3‐ [CH₂Ph or CH₂(2‐MeOC₆H₄)] positions. The indenyl–rhodium(III) complexes bearing one ethoxycarbonyl group showed higher thermal stability and regioselectivity than our previously reported Cp^ERh^III complex toward the oxidative [3+2] annulation of acetanilides with internal alkynes.     

Apotirucallane and tirucallane triterpenoids from Cedrela sinensis

Nine new triterpenoids, 1-9, were isolated from the cortex of Cedrela sinensis (Meliaceae), together with six known compounds, sapelin E acetate, grandifoliolenone, azadirone, bourjotinolone A, piscidinol A, and hispidol B. The structures of 1-9 were determined by the 2D NMR experiments, chemical methods, and X-ray crystallography.     

Excellent Redox Properties of Poly(thienylphenylamine)s

Triphenylamines with thienyl groups are electro‐oxidatively polymerized to yield the corresponding branched polymers on an electrode. The resulting polymers show significantly better redox properties, such as redox activity, catalytic activity, and conductivity when compared with for example the linear polymeric analog. The good properties of the branched polymers are based on the higher electronic conductivity (2–6 S/cm), since the branching provides multiple routes for charge carriers. The redox‐active polymers show high capacity (ca. 40 mC/cm²) and catalytic activity for the electron transfer of ferrocene on the electrode.     

Cationic amylopectin derivatives as additives for analysis of proteins in capillary electrophoresis

Positively charged amylopectin, which is a major constituent of cationic starch, was used to modify the inner surface of fused-silica capillaries by addition to the running solution, which was subsequently employed in CE. Capillaries filled with cationic amylopectin derivatives were shown to generate a stable reversed EOF in the investigated range of pH 4-8. Among the additives studied, quaternary ammonium amylopectin derivatives with high amino and low hydroxypropyl groups showed fast electroosmotic mobility and very effectively suppressed the adsorption of proteins. The run-to-run and batch-to-batch repeatability of the procedures were satisfactory with RSDs of 0.5% and 2.4%, respectively. A basic protein, alpha-chymotrypsinogen, migrated within 6 min and the theoretical plate number of it reached 560 000 plates/m.     

Oxidation of 7,8‐diaminotheophylline with lead tetraacetate and reaction of the oxidation product, 6‐cyanoimino‐5‐diazo‐1,3‐dimethylpyrimidine‐2,4‐dione with alcohols or amines

Oxidation of 7,8‐diaminotheophylline (1) with lead tetraacetate in refluxing toluene gave a mixture of 3‐amino‐5,7‐dimethylpyrimido[4,5‐e][1,2,4]triazine‐6,8‐dione ( 2 ) and 6‐cyanoimino‐5‐diazo‐1,3‐dimethylpyrimidine‐2,4‐dione ( 4 ). The latter was transformed to 2 by the reaction with 1‐propanethiol in quantitative yield. The reaction of 4 with methanol, ethanol and 1‐propanol in the presence of rhodium ( II ) acetate gave 5‐alkoxy‐6‐(2‐alkyl‐3‐isoureido)‐1,3‐dimethylpyrimidine‐2,4‐diones ( 7a‐c ). A similar reaction of 4 with alkylamines such as n‐propylamine, n‐butylamine, isobutylamine and n‐hexylamine gave a mixture of 7‐alkyl‐8‐aminotheophyllines ( 8a‐d ) and (5‐alkylamino‐1,3‐dimethyl‐2,4‐dioxopyrimidin‐6‐yl)cyanamides ( 9a‐d ).