Methods for the preparation of mercury and osmium samples suitable for ion microprobe measurements

Using radiotracer solutions of Hg (²⁰³Hg) and Os (¹⁸⁵Os), techniques have been developed for sampling these elements presumably suitable for ion probe measurements. Mercury has been electrodeposited on the cross-sectional area (5 mm²) of an electrochemically pure Cu wire giving a recovery 25 to 30% at the tip. Similar efficiency is found for Hg distillate solutions. Osmium has been collected in a Ni–NiS bead after loading its thiourea complex solution on filter paper. The recovery in the bead is 80–90%. These methods should be of help for isotopic study of these elements by ion microprobe. The suitability of these samples for measurements remains unconfirmed.     

Spectrophotometric studies on the zirconium complex of 2-(3,6-disulfo-8-hydroxynaphthylazo)-1,8-dihydroxynaphtualene-3, 6-disulfonic acid

Summary A chromotropic azo dye, DSNADNS, prepared from chromotropic acid and 1-amino-8-naphthol-3,6-disulfonic acid has been found to produce quantitative precipitation of zirconium in acid medium. The blue-violet complex formed is insoluble in all organic solvents commonly used for solvent extraction work, but is soluble in a number of liquid organic bases and solutions of ammonium salts in water showing pink to violet colouration. Spectrophotometric studies as to the nature of the complex in pyridine, triethanolamine ammonium acetate, oxalate and carbonate solutions and the analytical possibility of these solutions have been made. The complex appears to decompose in pyridine, ammonium acetate and ammonium oxalate solutions, but it is fairly stable in ammonium carbonate and triethanolamine solutions. The absorbance peaks of the dye in these solutions occur at 500 and 520 nm respectively, while the complex in triethanolamine and ammonium carbonate both shows absorbance maxima at 540 nm. The solution of the complex in these two solvents obeys Beer's law within a concentration range 4 to 25 mg of zirconium per litre. The molar absorbance coefficients of the complex in triethanolamine and ammonium carbonate are respectively 686 and 823, which indicate poor sensitivity. The solution of the complex in the former solvent is more stable than that in the latter and an analytical procedure for the spectrophotometric determination of zirconium, with little interference from foreign ions, may be developed with ease in the triethanolamine solution.

---

Zusammenfassung Ein Azofarbstoff der Chromotropsäure, DSNADNS, der aus Chromotropsäure und 1-Amino-8-naphthol-3,6-disulfonsäure dargestellt werden kann, ergibt mit Zirkonium in saurer Lösung eine quantitative Fällung. Der blauviolett gefärbte Komplex ist in allen üblichen organischen Lösungsmitteln unlöslich, löst sich jedoch in einigen flüssigen organischen Basen sowie wäßrigen Lösungen von Ammoniumsalzen mit rosa bis violetter Färbung. Die Lösungen des Komplexes in Pyridin, Triäthanolamin sowie in Ammoniumacetat, -oxalat und -carbonatlösungen und ihre analytische Verwendbarkeit werden spektrophotometrisch untersucht. In Pyridin sowie in Ammoniumacetat und -oxalatlösungen scheint sich der Komplex zu zersetzen, während er in Triäthanolamin und Ammoniumcarbonatlösungen ziemlich beständig ist. Das Absorptionsmaximum des Farbstoffs in diesen beiden Lösungsmitteln liegt bei 500 bzw. 520 nm, der Komplex weist in beiden Fällen ein Maximum bei 540 nm auf. Das Beersche Gesetz wird in beiden Lösungsmitteln von 4–25 mg Zr/l erfüllt. Der molare Absorptionskoeffizient beträgt 686 bzw. 823. Die Lösung des Komplexes in Triäthanolamin ist stabiler als in Ammoniumcarbonatlösung. Eine spektrophotometrische Bestimmung von Zirkonium, die nur wenig von Fremdionen gestört wird, könnte daher gut in Triäthanolaminlösung durchgeführt werden.

     

Synthesis, X-ray structure and properties of a new nitrite-bound copper(II) complex with 2-(3,5- dimethylpyrazol-1-ylmethyl)pyridine in a CuN4(O) coordination

Synthesis and characterization of a nitrite-bound copper(II) compound [CuL⁴)₂(ONO)]ClO₄ have been achieved (L⁴ = 2-(3,5-dimethylpyrazol-1-ylmethyl)pyridine]. The bidentate ligand L⁴ provides a pyridine and a pyrazole donor site; however, they are separated by a methylene spacer. The complex has been structurally characterized and it belongs to only a handful of complexes having nitrito-bound mononuclear copper(II) centre. The metal atom has a distorted square pyramidal geometry with the copper atom displaced from the equatorial plane by 0.25 Å. In MeCN solution the green complex exhibits a broad ligand-field transition at 655 nm with a shoulder at 675 nm and in dichloromethane-toluene glass (80 K) it exhibits an EPR spectral feature characteristic of the unpaired electron in the d_x²−y² orbital. Variable-temperature (80–300 K) magnetic susceptibility measurements in the solid state as well as room temperature measurement in MeCN solution reveal mononuclear magnetically dilute copper(II) centre. When examined by cyclic voltammetry (MeCN solution) it displays electrochemically irreversible Cu^II---Cu^I response [cathodic peak potential, E_pc (V vs saturated calomel electrode (SCE)): −0.32]. An oxidative response is observed at 1.14 V, probably due to bound-nitrite oxidation and is partially removed to generate a solvated complex at the electrode surface. The latter species gives rise to reversible Cu^II---Cu^I redox response [ ].     

Stability of AQUO-organic silver iodide sol

Summary The coagulation concentration for silver iodide sol, both in presence of pyridine and dioxane, increases for mono- and bivalent coagulating electrolyte. In presence of a mixture of pyridine and dioxane in equal volume, the coagulation concentration assumes an intermediate value, which is nearer to dioxane. However, in presence of dioxane more bivalent electrolyte is needed than in presence of pyridine. If a bivalent coagulating electrolyte is added to a sol containing a mixture of pyridine and dioxane, the amount of electrolyte required to coagulate is less than pyridine and greater than dioxane. Thus silver iodide sol is more stable toward mono- and bivalent coagulating electrolytes. The degree of stabilization increases with the decrease of the dielectric constant of the dispersing medium. The intermediate values for dioxane pyridine mixture is accountable by the fact that dioxane acts as a solvent for pyridine. The PH value of the sol increases up to the coagulation point. Beyond this, there is an abrupt decrease. When the particles settle down completely a rise in PH is again noted on the further addition of electrolytes. The increase in the electrical conductance is more significant after coagulation. These changes have been explained by adsorption of the ions and due to the release of ions from the electrical double layer.

---

Zusammenfassung Die Koagulationskonzentration für Silberjodidsol in Gegenwart von Pyridin und Dioxan steigt für ein- und zweiwertige Elektrolyte an. In Gegenwart einer Mischung zu gleichen Volumen erh?lt man mittlere Werte, n?her denen zu Dioxan. Für Koagulation in Gegenwart von Dioxan ist jedoch mehr zweiwertiger Elektrolyt notwendig als in Gegenwart von Pyridin. Bei Koagulation mit zweiwertigem Elektrolyt verbraucht ein Sol mit der Mischung von Pyridin und Dioxan weniger als für Pyridin und mehr als für Dioxan. Daher ist das Silbersol gegenüber ein- und zweiwertigen Elektrolyten stabiler. Der Grad der Stabilisierung w?chst mit abnehmender Dielektrizit?tskonstante des Dispersionsmediums. Die Zwischenwerte der Dioxan-Pyridin-Mischungen lassen sich verstehen durch die Tatsache, da? Dioxan als L?sungsmittel für Pyridin wirkt. Der PH-Wert des Sols w?chst bis zum Koagulationspunkt, darüberhinaus erfolgt ein steiler Abfall. Wenn die Teilchen vollst?ndig absetzen, ist bei weiterer Zugabe von Elektrolyt ein erneuter Anstieg im PH feststellbar. Der Anstieg der elektrolytischen Leitf?higkeit wird nach der Koagulation ausgepr?gter. Diese ?nderungen lassen sich durch Ionenadsorption und Freiwerden von Ionen aus der elektrischen Doppelschicht erkl?ren.

---

---

Our thanks are due to Prof. R. C. Mehrotra for providing all the facilities for this work and to Prof. S. Ghosh of Allahabad University for helpful discussions. Thanks are also due to the University Grants Commission, Government of India, for the award of a research scholarship to one of us (V. K. S.).     

Spectrophotometric determination of traces of selenium(IV) in various environmental samples using the flow-injection technique (FIT)

A simple, sensitive, and rapid flow-injection spectrophotometric method was developed for the determination of trace amounts of selenium(IV). The method is based on the oxidation reaction of 3-methyl-2-benzothiazolinone hydrazone hydrochloride (MBTH) by selenium(IV) followed by the coupling reaction with chromotropic acid (4.5-dihydroxy naphthalene-2.7-disulphonic acid) in a basic medium (phosphate buffer, pH 10.5) to give a pink derivative with λ_max 530 nm that is stable for more than 7 days at 35°C. The reaction and flow conditions of the full experimental design were optimized. A detection limit (2s) of 0.25 μg/L Se(IV) was obtained at a sampling rate of 10 samples per hour. Beer’s law is obeyed for a Se(IV) concentration range of 0.05–0.5 μg/mL at the wavelength of maximum absorption. The detailed study of various interference ions indicates that the method is highly selective. The method was successfully applied to the determination of traces of selenium(IV) in various water samples. The results obtained were in good agreement with those obtained by the reported methods at the 95% confidence level. The text was submitted by the authors in English.     

Kinetics of substitution of aquo ligands fromcis-diaquo-bis-(biguanide) cobalt(III) and chromium(III) ions by aspartic acid in ethanol—water mixtures

The kinetics of substitution of aqua ligands fromcis-diaqua-bis(biguanide)cobalt(III) and chromium(III) ions by aspartic acid in EtOH–H₂O media have been studied spectrophotometrically in the 30 to 45°C range. We propose the following rate law for the anation

Silica-alumina supported transition metal oxide catalyst for alkylation of aromatic compounds

Titanium oxide on silica-alumina support is described to be an efficient regenerable catalyst for alkylation of aromatic compounds with alkyl halides, alcohols and olefins, and the reaction is proposed to be initiated by the protonated metal active species present in the catalyst.     

On the characterization of electrified interface

Summary Estimation of zeta potential from experimental data on electroosmotic and electrophoretic effects for Zeokarb 225 (Na⁺ form)/methanol-water system has been made and discussed. Results indicate that zeta potentials estimated from electroosmotic flux and electrophoretic mobility are not in agreement and vary with applied potential difference in a linear manner. Reasons for the variation of zeta potential with electrical field have been discussed. It has been argued that zeta potentials estimated from electroosmotic data are more reliable in comparison to the values obtained from electrophoretic data.With 2 figures and 2 tables     

Solution- and solid-phase synthesis of natural product-like tetrahydroquinoline-based polycyclics having a medium size ring

A solid-phase synthesis of tetrahydroquinoline-derived polycyclic 4, having a medium size ring with an enamide functionality, was achieved from tetrahydroquinoline derivative 3 in five steps with overall 40-45% yield. An enantiopure, tetrahydroquinoline-derived beta-amino ester, 1, was converted into compound 2 that has a free phenolic hydroxyl group as an anchoring site for solid-phase synthesis. The solid-phase worked well for this sequence, in which the synthesis of the unsaturated eight-membered enamide lactam was obtained by a ring-closing metathesis approach. Compound 4 is a novel, natural product-like polycyclic derivative that could further be utilized in library generation for developing small molecule chemical probes.