Mechanisms and kinetics of trisodium 2-hydroxy-1,1'-azonaphthalene-3,4',6-trisulfonate adsorption onto chitosan

Chitosan, a naturally abundant biopolymer, has widely been studied for metal adsorption from various solutions, but the extension of chitosan as an adsorbent to remove organic substances from water and wastewater has seldom been explored. In this study, the adsorption of an azo dye, trisodium 2-hydroxy-1,1'-azonaphthalene-3,4',6-trisulfonate (1), from aqueous solution onto the various degrees of deacetylated chitosan has been investigated. Equilibrium studies have been carried out to determine the capacity of chitosan for dye. The experimental data were analyzed using two isotherm correlations, namely, Langmuir and Freundlich equations. The linear correlation coefficients were determined for each isotherm and the Langmuir provided the best fit. The experimental adsorption isotherms were perfectly reproduced in the simulated data obtained from numerical analysis on the basis of the Langmuir model and the isotherm constants. Adsorption of (1) onto the chitosan flakes was found to be strongly depending on degrees of deacetylation in chitosan and temperatures. Significant amounts of (1) were adsorbed by chitosan 8B (higher degree of deacetylated chitosan), but the adsorption capacity was reduced remarkably with increasing solution temperatures. Thermodynamic parameters such as change in free energy (DeltaG), enthalpy (DeltaH), and entropy (DeltaS) were also determined. In addition, kinetic study indicated that the adsorption process mechanisms were both transport- and attachment-limited.     

1,5-Benzothiazepine Derivatives: Green Synthesis,In Silico and In Vitro Evaluation as Anticancer Agents

Considering the importance of benzothiazepine pharmacophore, an attempt was carried out to synthesize novel 1,5-benzothiazepine derivatives using polyethylene glycol-400 (PEG-400)-mediated pathways. Initially, different chalcones were synthesized and then subjected to a cyclization step with benzothiazepine in the presence of bleaching clay and PEG-400. PEG-400-mediated synthesis resulted in a yield of more than 95% in less than an hour of reaction time. Synthesized compounds 2a–2j were investigated for their in vitro cytotoxic activity. Moreover, the same compounds were subjected to systematic in silico screening for the identification of target proteins such as human adenosine kinase, glycogen synthase kinase-3β, and human mitogen-activated protein kinase 1. The compounds showed promising results in cytotoxicity assays; among the tested compounds, 2c showed the most potent cytotoxic activity in the liver cancer cell line Hep G-2, with an IC₅₀ of 3.29 ± 0.15 µM, whereas the standard drug IC₅₀ was 4.68 ± 0.17 µM. In the prostate cancer cell line DU-145, the compounds displayed IC₅₀ ranges of 15.42 ± 0.16 to 41.34 ± 0.12 µM, while the standard drug had an IC₅₀ of 21.96 ± 0.15 µM. In terms of structural insights, the halogenated phenyl substitution on the second position of benzothiazepine was found to significantly improve the biological activity. This characteristic feature is supported by the binding patterns on the selected target proteins in docking simulations. In this study, 1,5-benzothiazepines have been identified as potential anticancer agents which can be further exploited for the development of more potent derivatives.     

Synthesis,Structural Investigations,and In Vitro/In Silico Bioactivities of Flavonoid Substituted Biguanide: A Novel Schiff Base and Its Diorganotin (IV) Complexes

Quercetin is one of the most powerful bioactive dietary flavonoids. The in vivo biological study of quercetin is extremely difficult due to its very low solubility. However, diorganotin complexes of quercetin are more useful when contrasted with quercetin due to increased solubility. In the present study, quercetin, substituted biguanide synthesized in the form of Schiff base and its di-alkyl/aryl tin (IV) complexes were obtained by condensing Schiff base with respective di-alkyl/aryl tin (IV) dichloride. Advanced analytical techniques were used for structural elucidation. The results of biological screening against Gram-positive/Gram-negative bacteria and fungi showed that these diorganotin (IV) derivatives act as potent antimicrobial agents. The in silico investigation with dihydropteroate (DHPS) disclosed a large ligand–receptor interaction and revealed a strong relationship between the natural exercises and computational molecular docking results.     

Collisional-radiative model for non-Maxwellian inductively coupled argon plasmas using detailed fine-structure relativistic distorted-wave cross sections

Our recently developed collisional-radiative model which included fine-structure cross sections calculated with a fully relativistic distorted-wave method [R.K. Gangwar, L. Sharma, R. Srivastava, A.D. Stauffer, J. Appl. Phys. 111, 053307 (2012)] has been extended to study non-Maxwellian inductively coupled argon plasmas. We have added more processes to our earlier collisional-radiative model by further incorporating relativistic distorted-wave electron impact cross sections from the 3p ⁵4sJ = 0, 2 metastable states, (1s ₃, 1s ₅ in Paschen’s notation) to the 3p ⁵5p (3p _i ) excited states. The population of various excited levels at different pressures in the range of 1–25 mTorr for an inductively coupled argon plasma have been calculated and compared with the recent optical absorption spectroscopy measurements as well as emission model results of Boffard et al. [Plasma Sources Sci. Technol. 19, 065001 (2010)]. We have also calculated the intensities of two emission lines, 420.1 nm (3p ₉ → 1s ₅) and 419.8 nm (3p ₅ → 1s ₄) and compared with measured intensities reported by Boffard et al. [J. Phys. D 45, 045201 (2012)]. Our results are in good agreement with the measurements.     

Sb induced (7×7) to (1×1) surface phase transformation of the Si(111) surface

Adsorption of Sb at a very low flux rate results in an epitaxial layer-by-layer growth on Si(111) surface held at room-temperature. Band-bending is not observed for submonolayer Sb coverages while sharp changes in the photoemission features are observed for 1.0 monolayer (ML) Sb adsorption. Changes in the core level binding energy and width in X-ray photoelectron spectroscopy, surface related feature in Electron energy loss spectroscopy and spot intensity ratios in Low energy electron diffraction studies suggest a surface phase transition upon adsorption of 1.0 monolayer of Sb. A plausible model is proposed to explain the abrupt metal-semiconductor transformation at this critical coverage of 1.0 ML.     

Curing and thermal behaviour of a flame retardant cycloaliphatic epoxy resin based on phosphorus containing poly(amide–imide)s

The curing behaviour of 3,4-epoxycyclohexylmethyl 3,4-epoxycyclohexane carboxylate was investigated by the dynamic differential scanning calorimetry (DSC) using phosphorus-containing poly(amide–imide)s (PAIs) having free amine groups, 4,4′-diaminodiphenylmethane (PM) and p-phenylenediamine (PA), in the ratio of 1:1. The PAIs were prepared by co-polymerization of diimide–diacid (DIDA) and phosphorus-containing triamines having phenylene moiety. l-Tryptophan and pyromellitic anhydride were used to synthesize DIDA. Triamines used in the synthesis PAIs were tris(3-aminophenyl) phosphine (TAP), tris(3-aminophenyl) phosphine oxide (TAPO) and bis(3-aminophenyl) aminotolyl phosphine (BAP). TAP-, TAPO- and BAP-containing PAIs were designated as PTAP, PTAPO and PBAP, respectively. These PAIs with free amine groups were characterized by FTIR, ¹H NMR, ¹³C NMR spectroscopic techniques and elemental analysis. The mixture of PAIs and PM or/and PA in the ratios of 0:1, 1:0 and 0.5:0.5 was used for investigation. DSC was used to study the curing of epoxy by recording the DSC scans at heating rates of 10 °C min^?1. Thermal stability of epoxy resin cured isothermally was evaluated by recording thermo gravimetric traces in nitrogen atmosphere at the heating rate of 20 °C min^?1. All samples are highly stable, and the 10 % mass loss found was in the range of 335–520 °C. The percent char yield was highest in case of resin sample E/PM/PTAPO. The flame-retardant properties of cured epoxy resins were investigated by the limiting oxygen index test (LOI) and UL94 test. When phosphorus was incorporated in epoxy resin, the epoxy resin system met the UL94 V-0 classification and the LOI reached at 37.8, because of nitrogen–phosphorus synergistic effect.     

Synthesis,spectral characterization and redox studies of [1-alkyl-2-(naphthyl-β-azo)imidazole] palladium(II) catecholates

1-Alkyl-2-(naphthyl--azo)imidazoles [-NaiR; R = Me (a), Et (b), CH₂Ph (c)] react with Pd(MeCN)₂Cl₂ to yield Pd(-NaiR)Cl₂ (2), the i.r. spectra of which support the presence of a cis-PdCl₂ configuration. The complexes react with catechols in the presence of Et₃N to yield ternary complexes [Pd(-NaiR)(O,O)] [O,O = pyrocatecholato (cat) (3), 4-t-butylcatecholato (tbcat) (4), 3,5-di-t-butylcatecholato (dtbcat) (5), and tetrachlorocatecholato (tccat) (6)], which were characterized by elemental analysis, i.r. and ¹H-n.m.r. spectral data. Redox studies by cyclic voltammetry suggest the existence of four successive redox couples wherein two responses, positive to s.c.e. are due to catechol to semiquinone and semiquinone to quinone oxidation, respectively; the couples at negative to s.c.e. are referred to azo reductions. The complexes exhibit ligand-ligand charge-transfer transitions in the near-i.r. region. The band position is largely dependent upon the substitutent on the catechol frame and exhibits negative solvatochromic effects. The transition is qualitatively assigned as the HOMO (cat) LUMO (-NaiR) transition. This fact is also supported by theoretical calculations using the PM3 method.     

Surface Interaction of Ionic Liquids: Stabilization of Polyethylene Terephthalate-Degrading Enzymes in Solution

The effect of aqueous solutions of selected ionic liquids solutions on Ideonella sakaiensis PETase with bis(2-hydroxyethyl) terephthalate (BHET) substrate were studied by means of molecular dynamics simulations in order to identify the possible effect of ionic liquids on the structure and dynamics of enzymatic Polyethylene terephthalate (PET) hydrolysis. The use of specific ionic liquids can potentially enhance the enzymatic hydrolyses of PET where these ionic liquids are known to partially dissolve PET. The aqueous solution of cholinium phosphate were found to have the smallest effect of the structure of PETase, and its interaction with (BHET) as substrate was comparable to that with the pure water. Thus, the cholinium phosphate was identified as possible candidate as ionic liquid co-solvent to study the enzymatic hydrolyses of PET.     

Fluorescent azophenol-quinazoline dyad as multichannel reversible pH indicator in aqueous media: an innovative concept on diazo based dyads

A novel azophenol-quinazoline dyad 1 has been designed, synthesized and demonstrated as an efficient reversible multichannel pH indicator through distinct signalling in aqueous media. Owing to the competence between highly fluorescent quinazoline moiety and a well known fluorescence quencher diazo group, dyad 1 is moderately fluorescent in nature. Under acidic conditions 1 displays diverse fluorogenic changes (blue emission at pH 4.25; green at pH 1.80) while under basic condition (pH 11.80) chromogenic changes were observed.     

Universal consequences of the presence of excluded volume interactions in dilute polymer solutions undergoing shear flow

The role of solvent quality in determining the universal material properties of dilute polymer solutions undergoing steady simple shear flow is examined. A bead-spring chain representation of the polymer molecule is used, and the influence of solvent molecules on polymer conformations is modelled by a narrow Gaussian excluded volume potential that acts pairwise between the beads of the chain. Brownian dynamics simulations data, acquired for chains of finite length, and extrapolated to the limit of infinite chain length, are shown to be model independent. This feature of the narrow Gaussian potential, which leads to results identical to a delta-function repulsive potential, enables the prediction of both universal crossover scaling functions and asymptotic behavior in the excluded volume limit. Universal viscometric functions, obtained by this procedure, are found to exhibit increased shear thinning with increasing solvent quality. In the excluded volume limit, they are found to obey power law scaling with the characteristic shear rate beta, in close agreement with previously obtained renormalization group results. The presence of excluded volume interactions is also shown to lead to a weakening of the alignment of the polymer chain with the flow direction.