Investigation of Diels–Alder Reaction of 7‐Substituted 4‐Styrylcoumarins with Symmetrical Dienophiles Leading to 3,4‐Annulated Coumarins

The thermal [4 + 2] cycloaddition reaction of 7‐substituted 4‐styrylcoumarins with N‐phenylmaleimide and tetracyanoethylene in nitrobenzene under reflux conditions rapidly gives 3,4‐annulated coumarins as the Diels–Alder adducts. The position of the surviving double bond was determined on the basis of NMR and supported by energies of the possible structures. The effects of the 7‐substituent and the solvent on the reaction were studied.     

Shear‐induced lamellar phase of an ionic liquid crystal at room temperature

The phase behaviour of a number of N‐alkylimidazolium salts was studied using polarizing optical microscopy, differential scanning calorimetry and X‐ray diffraction. Two of these compounds exhibit lamellar mesophases at temperatures above 50°C. In these systems, the liquid crystalline behaviour may be induced at room temperature by shear. Sheared films of these materials, observed between crossed polarisers, have a morphology that is typical of (wet) liquid foams: they partition into dark domains separated by brighter (birefringent) walls, which are approximately arcs of circle and meet at “Plateau borders” with three or more sides. Where walls meet three at a time, they do so at approximately 120° angles. These patterns coarsen with time and both T1 and T2 processes have been observed, as in foams. The time evolution of domains is also consistent with von Neumann's law. We conjecture that the bright walls are regions of high concentration of defects produced by shear, and that the system is dominated by the interfacial tension between these walls and the uniform domains. The control of self‐organised monodomains, as observed in these systems, is expected to play an important role in potential applications.     

Evaluation of novel ZnO–Ag cathode for CO2 electroreduction in solid oxide electrolyser

CO₂ and steam/CO₂ electroreduction to CO and methane in solid oxide electrolytic cells (SOEC) has gained major attention in the past few years. This work evaluates, for the very first time, the performance of two different ZnO–Ag cathodes: one where ZnO nanopowder was mixed with Ag powder for preparing the cathode ink (ZnO_mix–Ag cathode) and the other one where Ag cathode was infiltrated with a zinc nitrate solution (ZnO_inf –Ag cathode). ZnO_mix–Ag cathode had a better distribution of ZnO particles throughout the cathode, resulting in almost double CO generation while electrolysing both dry CO₂ and H₂/CO₂ (4:1 v/v). A maximum overall CO₂ conversion of 48% (in H₂/CO₂) at 1.7 V and 700 °C clearly indicated that as low as 5 wt% zinc loading is capable of CO₂ electroreduction. It was further revealed that for ZnO_inf –Ag cathode, most of CO generation took place through RWGS reaction, but for ZnO_mix–Ag cathode, it was the synergistic effect of both RWGS reaction and CO₂ electrolysis. Although ZnO_inf –Ag cathode produced trace amount of methane at higher voltages, with ZnO_mix–Ag cathode, there was absolutely no methane. This seems to be due to strong electronic interaction between Zn and Ag that might have suppressed the catalytic activity of the cathode towards methanation.

     

Lattice engineering route for self-assembled nanohybrids of 2D layered double hydroxide with 0D isopolyoxovanadate: chemiresistive SO2 sensor

Tuning the interior chemical composition of layered double hydroxides (LDHs) via lattice engineering route is a unique approach to enable multifunctional applications of LDHs. In this regard, the exfoliated 2D LDH nanosheets coupled with various guest species lead to the lattice-engineered LDH-based multifunctional self-assembly with precisely tuned chemical composition. This article reports the synthesis and characterization of mesoporous zinc–chromium-LDH (ZC-LDH) hybridized with isopolyoxovanadate nanohybrids (ZCiV) via lattice-engineered self-assembly between delaminated ZC-LDH nanosheets and isopolyoxovanadate (iPOV) anions. Electrostatic self-assembly between 2D ZC-LDH monolayers and 0D iPOV significantly altered structural, morphological, and surface properties of ZC-LDH. The structural and morphological study demonstrated the formation of mesoporous interconnected sheet-like architectures composed of restacked ZCiV nanosheets with expanded surface area and interlayer spacing. In addition, the ZCiV nanohybrid resistive elements were used as a room-temperature gas sensor. The selectivity of ZCiV nanohybrid was tested for various oxidizing (SO₂, Cl₂, and NO₂) gases and reducing (LPG, CO, H₂, H₂S, and NH₃) gases. The optimized ZCiV nanohybrid demonstrated highly selective SO₂ detection with the maximum SO₂ response (72%), the fast response time (20 s), low detection limit (0.1 ppm), and long-term stability at room temperature (27 ± 2 °C). Of prime importance, ZCiV nanohybrids exhibited moderately affected SO₂ sensing responses with high relative humidity conditions (80%–95%). The outstanding SO₂ sensing performance of ZCiV is attributed to the active surface gas adsorptive sites via plenty of mesopores induced by a unique lattice-engineered interconnected sheet-like microstructure and expanded interlayer spacing.     

Gravity-free hydraulic jumps and metal femtoliter cups

Hydraulic jumps created by gravity are seen everyday in the kitchen sink. We show that at small scales a circular hydraulic jump can be created in the absence of gravity by surface tension. The theory is motivated by our experimental finding of a height discontinuity in spreading submicron molten metal droplets created by pulsed-laser ablation. By careful control of initial conditions, this leads to solid femtoliter cups of gold, silver, copper, niobium, and tin.     

A Photochemical/Thermal Switch Based on 4,4′-Bis(benzimidazolio)stilbene: Synthesis and Supramolecular Properties.

Stilbene derivatives are well-recognised substructures of molecular switches based on photochemically and/or thermally induced (E)/(Z) isomerisation. We combined a stilbene motif with two benzimidazolium arms to prepare new sorts of supramolecular building blocks and examined their binding properties towards cucurbit[n]urils (n=7, 8) and cyclodextrins (β-CD, γ-CD) in water. Based on the ¹H NMR data and molecular dynamics simulations, we found that two distinct complexes with different stoichiometry, i. e., guest@β-CD and guest@β-CD₂, coexist in equilibrium in a water solution of the (Z)-stilbene-based guests. We also demonstrated that the bis(benzimidazolio)stilbene guests can be transformed from the (E) into the (Z) form via UV irradiation and back via thermal treatment in DMSO.     

N-Chlorosuccinimide (NCS)–N,N-dimethylformamide (DMF), a reagent for the oxidation of benzylic alcohols to aldehydes and ketones

Molecular Diversity - The oxidation of benzylic alcohol to corresponding aldehyde and ketone using N-chlorosuccinimide (NCS)–N,N-dimethylformamide (DMF) has been described. This method gives...     

Computational Approaches to Discover Novel Natural Compounds for SARS-CoV-2 Therapeutics

Scientists all over the world are facing a challenging task of finding effective therapeutics for the coronavirus disease (COVID-19). One of the fastest ways of finding putative drug candidates is the use of computational drug discovery approaches. The purpose of the current study is to retrieve natural compounds that have obeyed to drug-like properties as potential inhibitors. Computational molecular modelling techniques were employed to discover compounds with potential SARS-CoV-2 inhibition properties. Accordingly, the InterBioScreen (IBS) database was obtained and was prepared by minimizing the compounds. To the resultant compounds, the absorption, distribution, metabolism, excretion and toxicity (ADMET) and Lipinski's Rule of Five was applied to yield drug-like compounds. The obtained compounds were subjected to molecular dynamics simulation studies to evaluate their stabilities. In the current article, we have employed the docking based virtual screening method using InterBioScreen (IBS) natural compound database yielding two compounds has potential hits. These compounds have demonstrated higher binding affinity scores than the reference compound together with good pharmacokinetic properties. Additionally, the identified hits have displayed stable interaction results inferred by molecular dynamics simulation results. Taken together, we advocate the use of two natural compounds, STOCK1N-71493 and STOCK1N-45683 as SARS-CoV-2 treatment regime.     

Determination of palladium in synthetic nuclear wastes by differential pulse voltammetry

A novel method for the determination of palladium in synthetic nuclear waste samples has been developed using a computerized voltammetric analyzer. The electrode system consists of hanging mercury drop electrode (HMDE)/glassy carbon/Ag-AgCl electrode. Various experimental conditions including electrolyte type, pH and concentration have been optimized, leading to a detection limit of 40 ng/ml. The mixture of 4^.10^-3M citric acid + 2^.10^-2M ammonia-ammonium chloride buffer + 4^.10^-3M EDTA was used as a supporting electrolyte at pH 9.0. Standard addition method was employed to determine the concentration of palladium present in the nuclear waste sample. The relative standard deviation of the proposed method was found to be 8% at 40 ng/ml of palladium content. The method is direct, simple, rapid and free from any possible interference.