Highly Stereoselective Cationic Cyclization Assisted by a Sulfenyl Group. Scope, Limitation, and Mechanism

When 8-acetoxy-2-methyl-9-(phenylthio)-2-nonene (1a) was treated with an acid, followed by a base, alkylative cyclization proceeded to give a mixture of 1,2-disubstituted cyclohexanes: 2a, 3a, and 4a. The stereochemistry of the reaction was only slightly affected by the leaving group and the reaction conditions, such as the temperature, solvent, and acid. However, the bulkiness of the sulfenyl group had a great effect on the stereochemical course of the reaction. High trans selectivity was attained when 1c (a derivative of 1a with a bulkier sulfenyl group) was used as a substrate. On the other hand, the length and rigidity of the carbon chain of the substrate also had a major effect on the stereochemistry of the reaction; a high cis selectivity was observed when 10a (a one-carbon-fewer analog of 1a) or 15a (a derivative with one more double bond in the carbon chain than in 1a) was used as the substrate. The reaction proceeded via a 6,5- or 5,5-fused-ring intermediate. The sulfenyl-group-assisted reaction could be a useful method for the stereoselective cyclization of acetates of alpha-sulfenylated secondary alcohols.     

Removal of aqueous ammonium with magnesium phosphates obtained from the ammonium-elimination of magnesium ammonium phosphate

In order to recycle magnesium ammonium phosphate (MgNH4PO4.6H2O: MAP) obtained from MAP process, which is one of the attractive processes for removal of aqueous ammonium and phosphate from wastewater, ammonium elimination from MAP to magnesium phosphates and ammonium incorporation into the magnesium phosphates have been investigated in the present study. It is confirmed that magnesium hydrogen phosphate (MgHPO4) is favorably obtained from the ammonium elimination from MAP at temperatures greater than 353 K, although magnesium phosphate (Mg3(PO4)2) and magnesium pyrophosphate (Mg2P2O7) have been suggested as possible candidates. Based on the dissolution-precipitation mechanism for the removal of aqueous ammonium with magnesium phosphates, three magnesium phosphates were employed for the removal of aqueous ammonium. The order of the removal rate of the aqueous ammonium was MgHPO4>Mg3(PO4)2>Mg2P2O7, as expected from the solubility of those magnesium phosphates. The removability of the solid obtained from ammonium elimination of MAP is also confirmed. The present results show that MAP can be employed as an advanced material for the removal/recovery of ammonium, although it is generally accepted that an excess of MAP obtained from the wastewater treatment can be only used as a slow-acting fertilizer.     

A facile combinatorial approach to construct a ratiometric fluorescent sensor: application for the real-time sensing of cellular pH changes

Realtime monitoring of the cellular environment, such as the intracellular pH, in a defined cellular space provides a comprehensive understanding of the dynamics processes in a living cell. Considering the limitation of spatial resolution in conventional microscopy measurements, multiple types of fluorophores assembled within that space would behave as a single fluorescent probe molecule. Such a character of microscopic measurements enables a much more flexible combinatorial design strategy in developing fluorescent probes for given targets. Nanomaterials with sizes smaller than the microscopy spatial resolution provide a scaffold to assemble several types of fluorophores with a variety of optical characteristics, therefore providing a convenient strategy for designing fluorescent pH sensors. In this study, fluorescein (CF) and tetramethylrhodamine (CR) were assembled on a DNA nanostructure with controlling the number of each type of fluorophore. By taking advantage of the different responses of CF and CR emissions to the pH environment, an appropriate assembly of both CF and CR on DNA origami enabled a controlled intensity of fluorescence emission and ratiometric pH monitoring within the space defined by DNA origami. The CF and CR-assembled DNA origami was successfully applied for monitoring the intracellular pH changes.

A combinatorial assembly of two types of intensity-based fluorophores on a DNA nanostructure provided a ratiometric pH probe with high emission intensity for monitoring intracellular pH changes.     

Pressure effect on bulk weak ferromagnets: (BDH-TTP)[M(isoq)2(NCS)4] (M = Cr(III), Fe(III); isoq = Isoquinoline)

The pressure dependence of the magnetic properties of weak ferromagnets (BDH-TTP)[M(isoq)2(NCS)4] [BDH-TTP = 2,5-bis(1',3'-dithiolan-2'-ylidene)-1,3,4,6-tetrathiapentalene; M = Cr, Fe; isoq = isoquinoline] is discussed. These salts form two-dimensional magnetic sheets, where ferrimagnetic chains of donor cation radical (S = 1/2) and anion [S = 3/2 (Cr), 5/2 (Fe)] are antiferromagnetically connected by weak donor-donor and anion-anion interchain S...S contacts. Under ambient pressure, both the Cr and Fe salts undergo a weak ferromagnetic transition at Tc = 7.6 K, below which a spontaneous magnetization emerges along the direction perpendicular to the sheets. The application of the pressure elevates the transition temperatures up to 16.6 and 11.6 K at 9 kbar for M = Cr and Fe, respectively. As the pressure increases, the remanent magnetization M(r) decreases, whose pressure dependence for the Cr salt is larger than that for the Fe salt. This difference indicates that the spin-canting angle of the Cr salt is reduced because of the increase of antiferromagnetic interaction by applied pressure, in contrast to the Fe salt, where single-ion anisotropy contributes less. The quantitative analysis of the magnetization curves of the Cr salt using the mean-field approximation reveals that the intermolecular exchange interaction increases as the pressure increases, among which the interchain anion-anion interaction has the highest pressure sensitivity. This result is consistent with the temperature dependence of the crystal structure showing that the thermal contraction in the distances of interchain anion-anion S...S contacts is the most remarkable in intrachain S...S contacts. The large pressure dependence of the transition temperature of these salts is therefore explained as a result of the fact that the interchain interactions, the anion-anion interaction in particular, are strengthened by applied pressure.     

Comparison of secondary ion intensity enhancement from polymers on silicon and silver substrates by using Au-TOF-SIMS

The usefulness of the usage of cluster primary ion source together with an Ag substrate and detection of Ag cationized molecular ions was studied from the standpoint to realize high sensitivity TOF-SIMS analysis of organic materials. Although secondary ions from polymer thin films on a Si substrate can be detected in a higher sensitivity with Au₃⁺ cluster primary ion compared with Ga⁺ ion bombardment, it was clearly observed that the secondary ion intensities from samples on an Ag substrate showed quite a different tendency from that on Si. When monoatomic primary ions, e.g., Au⁺ and Ga⁺, were used for the measurement of the sample on an Ag substrate, [M+Ag]⁺ ions (M corresponds to polyethylene glycol molecule) were detected in a high sensitivity. On the contrary, when Au₃⁺ was used, no intensity enhancement of [M+Ag]⁺ ions was observed. The acceleration energy dependence of the detected secondary ions implies the different ionization mechanisms on the different substrates.     

Substoichiometric and non-destructive determination of trace impurities in high-purity optical glasses by neutron activation analysis

A method of radioactivation analysis has been developed for the determination of 17 elements as impurities in high-purity optical glasses. The substoichiometric extraction of platinum with dithizone was studied and a simple procedure was proposed for the determination of platinum. Copper and manganese were also determined substoichiometrically by the extractions with dithizone and with thenoyltrifluoracetone, respectively. The non-destructive γ-ray spectrometry using a Ge(Li) detector has been applied for the determination of the other 14 elements (Ag, Co, Cr, Eu, Fe, Ir, Sc, Zn, Cs, Hf, Rb, Sb, Ta and Tb). Impurity elements at the ppb level were analysed by the proposed method and it is shown that the method is reliable for the determination of trace impurities in high-purity optical glasses.     

Determination of nickel,gold and silver in gallium arsenide by radioactivation analysis based on the quantitative isotope dilution principle

A method of radioactivation analysis has been developed for the determination of Ni, Au and Ag impurities in gallium arsenide. The separation and substoichiometric extraction of these elements were studied and analytical procedures are suggested for their determination. All components are separated by suitable procedures and determined by substoichiometric methods. Ni is extracted as diethyldithiocarbamate into toluene, Au as a complex of rhodamine-B in chloroform, and Ag as dithizonate in carbon tetrachloride. The contents of Ni, Au and Ag in a gallium arsenide crystal with a carrier concentration of 1.8·10¹⁶/cm³ were 0.05–0.08, 0.006–0.008 and 0.002–0.005 ppm, respectively.     

The synthesis of novel polycyclic heterocyclic ring systems via photocyclization. 1. Thieno[3′,2′:4,5]thieno[2,3-c]quinoline and thieno[2′,3′:4,5]thieno[2,3-c]quinoline

The synthesis of two previously unknown heterocyclic ring systems, namely, thieno[3′,2′:4,5]thieno[2,3-c]-quinoline and thieno[2′,3′:4,5]thieno[2,3-c]quinoline is reported. These two novel ring systems were assembled by photocyclization of the appropriate anilides.     

Isomeric yield ratios of fission products in the system of 24 MeV proton-induced fission of238U

Isomeric yield ratios of 30 fission products in 24 MeV proton-induced fission of²³⁸U were measured by the use of the ion-guide isotope separator on-line. The obtained isomeric yield ratios were converted to the angular momenta of primary fission fragments based on the statistical model. The deduced angular momenta were examined from various aspects. It is found that in general the angular momentum continuously increases with the fragment mass number including the region of symmetric mass division. However, there are some exceptions. For Sn isotopes the deduced angular momenta are quite small due to the spherical shape of the nuclear shell configuration. It is also concluded from the consideration of the charge distribution that the angular momentum of fission product scatters considerably within the narrow range of mass division. The dependence of the angular momentum on the available energy of fragments at scission point indicates that the individual fragment possesses a characteristic deformation at scission and/or the deduced angular momentum is seriously affected by the particle excitation after scission.     

Substoichiometric determination of chromium by neutron activation analysis

A method of radioactivation analysis has been developed for the determination of chromium. It is based on the substoichiometric extraction of chromium diethyldithio-carbamate into methyl-isobutyl-ketone from acetate buffer solution in the presence of EDTA and potassium cyanide. The method has been applied for the determination of chromium in high-purity calcium carbonate and NBS glasses as standard reference materials.