New alkaline earth aluminum hydride with one-dimensional zigzag chains of [AlH6]: synthesis and crystal structure of BaAlH5

The title hydride and its deuteride were successfully synthesized. The crystal structure of the deuteride was determined by time-of-flight neutron powder diffraction. BaAlD(5) crystallizes with a new orthorhombic structure in space group Pna2(1) (No. 33), cell parameters a = 9.194(1) A, b = 7.0403(9) A, and c = 5.1061(6) A, Z = 4. BaAlH(5) is the first example that contains one-dimensional zigzag chains of [AlH(6)] along the crystallographic c axis.     

Synthesis and mechanism research of an ethylene glycol-based sol-gel method for preparing PZT nanopowders

Lead zirconate titanate nanopowders Pb(Zr_0.52Ti_0.48)O₃ (PZT) were prepared by modified sol-gel process in ethylene glycol system with zirconium nitrate as the zirconium source. The research showed that it was critical to add lead acetate after the reaction of zirconium nitrate and tetrabutyl titanate in ethylene glycol system for preparing PZT of exact titanium content. The reaction mechanisms of the sol synthesis, preparation of xerogel and agglutinating process were characterized through using FT-IR, NMR, TG-FTIR, and GC-MS. The experiment proved that ethylene glycol system did not rely on hydrolysis and condensation reactions in the process of the sol formation, but on the formation of chain or network large molecules from complexation of ethylene glycol and all Ti and minor Pd, Zr. In the preparation of xerogel, the complexation reaction was so completed that it formed large molecules network composed of metal and dioxyethyl. Bulk weight loss happened before 350°C in the process of sintering xerogel to prepare PZT nanopowders. Volatile matters and vapor phase decomposition resultants were primarily oxy-compounds including ethylene glycol, aldehyde-ketone compounds, carbon dioxide and nitrate radical conversion matters. After 350°C, primary vapor phase decomposition resultants were carbon dioxide and minor carbonyl compound.     

Supramolecular isomers in the same crystal: a new type of entanglement involving ribbons of rings and 2D (4,4) networks polycatenated in a 3D architecture

The reaction of corresponding cadmium salts with the flexible ligand 1,4-bis(1,2,4-triazol-1-ylmethyl)benzene (bbtz) affords the 3D coordination network [Cd3(bbtz)6(H2O)6](BF4)(6.1.75H2O (1), containing ribbons of rings and planar 2D (4,4) networks polycatenated with each other, the undulating 2D (4,4) network [Cd(bbtz)2(H2O)2](ClO4)2.2H2O (2), and ribbons of rings [Cd(bbtz)2(H2O)2](BF4)2.3DMF (3) and [Cd(bbtz)2(H2O)2](ClO4)2.3DMF (4).     

An ab initio study on luminescent properties and aurophilic attraction of binuclear gold(I) complexes with phosphinothioether ligands

Electronic structures and spectroscopic properties of the binuclear head-to-tail [Au(2)(PH(2)CH(2)SH)(2)](2+) (1) complex were investigated by ab initio calculations. The solvent effect of the complex in the acetonitrile solution was taken into account by the weakly solvated [Au(2)(PH(2)CH(2)SH)(2)](2+).(MeCN)(2) (2) moiety in the calculations. The ground-state geometries of 1 and 2 were fully optimized by the MP2 method, while their excited-state structures were optimized by the CIS method. Aurophilic attraction apparently exists between the two Au(I) atoms in the ground state and is strongly enhanced in the excited state. A high-energy phosphorescent emission was calculated at 337 nm for 1 in the absence of the interactions with solvent molecules and/or counteranion in solid state; however the lowest-energy emission of 2 was obtained at 614 nm with the nature of (3)A(u)(s(sigma)) --> (1)A(g)(d(sigma)) (metal-centered, MC) transition. The coordination of acetonitrile to the gold atom in solution results in a dramatic red shift of emission wavelength. The investigations on the head-to-tail [Au(2)(PH(2)CH(2)SCH(3))(2)](2+) (5) and [Au(2)(PH(2)CH(2)SCH(3))(2)](2+).(MeCN)(2) (6) moieties indicate that the CH(3) substituent on the S atom causes blue shifts of emission wavelength for 5 and 6 with respect to 1 and 2. By comparison between Au(I) thioether 1 and head-to-tail Au(I) thiolate [Au(2)(PH(2)CH(2)S)(2)] (7), it is concluded that the S-->Au dative bonding results in evidently different transition characteristics from the S-Au covalent bonding in the Au(I) thioether/thiolate complexes.     

六氰合铁酸铜钴在蜡浸石墨电极表面的电化学沉积

首次报道了电化学沉积的混合金属六氰合铁酸盐修饰电极作为电流型传感器的研究。针对六氰合铁酸盐修饰电极在中性和碱性条件下的不稳定性，采用混合金属电沉积的方法，成功地提高了电极的稳定性，所得到的修饰电极在 ｐＨ ４～１０之间均表现出良好的稳定性。该电极的响应时间（ｔ９５％）为 ０．５ｓ，并对Ｆｅ３＋／Ｆｅ２＋电对表现出良好的电催化作用。催化氧化峰电流与Ｆｅ２＋的浓度在１．０×１０－４～６．５×１０－２ｍｏｌ/Ｌ范围内呈很好的线性关系，检测下限为 １．４×１０－６ｍｏｌ／Ｌ。     

Receptor-bound conformation of an alpha(5)beta(1) integrin antagonist by (15)N-edited 2D transferred nuclear overhauser effects

We report the results of (15)N-edited 2D transferred NOE experiments of the partially (15)N-labeled alpha(5)beta(1) antagonist c[Mpa(15)N-Arg-(15)N-Gly-(15)N-Asp-(15)N-Asp-(15)N-Val-Cys]-NH(2) (Mpa denotes mercaptopropionic acid) in the presence of the native alpha(5)beta(1) receptor. The alpha(5)beta(1) integrin receptor is believed to be involved in tumor metastasis and the rational design of alpha(5)beta(1) integrin antagonist is therefore of considerable interest. Our experiments provide insight into the alpha(5)beta(1) receptor-bound conformation of the antagonist c[MpaRGDDVC]-NH2 and will be important for the design of novel antagonists.     

Detection of single nucleotide polymorphisms using electrospray ionization mass spectrometry: validation of a one-well assay and quantitative pooling studies

Single nucleotide polymorphisms (SNPs) are currently being mapped and databased at a remarkable pace, providing a viable means for understanding disease susceptibility, differential drug response and human evolution. Consequently, there is an increasing demand for SNP genotyping technologies that are simple, rapid, cost effective and readily amenable to automation for high-throughput analyses. In this study, we improved the Survivor Assay, a SNP detection method based on electrospray ionization mass spectrometry (ESI-MS), with several developments. One improvement is the development of a one-well assay, requiring no off-line purification of the polymerase chain reaction product, achieved by simple addition of reagent solution into a single well. Another is the on-line separation of magnesium and dideoxynucleotides using an in-house made monolithic metal chelating column, eliminating any off-line sample preparation prior to mass spectrometric analysis. Here the Survivor Assay is extended from a proof-of-principle concept to a validated method by genotyping six SNPs from five different regions of human genomic DNA in 55 individual samples with 100% accuracy. This improved Survivor Assay eliminates the tedious and time-consuming steps of sample preparation, minimizes sample handing and offers a high-throughput analysis of SNPs by ESI-MS. The current combined preparation and analysis time is 2 min per sample. The simplicity of this method has potential for full automation and parallel chromatography and, thus, reduced analysis time. In addition, we have adapted the Survivor Assay for quantitative SNP analysis in pooled DNA samples. The capabilities and sensitivity of this approach were evaluated. We demonstrate that an allele occurring at a frequency of 2% can consistently be quantitated.     

二碘化钐还原硫代碳酸酯

在ＳｍＩ＿２－ＨＭＰＡ－ＴＨＦ－ｔ－ＢｕＯＨ体系中，硫代碳酸酯的酰硫键发生还原断裂反应，得到相应的二硫醚产物。     

Synthesis of a silica-bonded bovine serum albumin s-triazine chiral stationary phase for high-performance liquid chromatographic resolution of enantiomers

A novel method of synthesizing protein chiral stationary phase (protein-CSP) is proposed with 2,4,6-trichloro-1,3,5-triazine as the activator. The bovine serum albumin (BSA) based chiral columns (150 x 4.6 mm I.D.) were prepared successfully within 8 h. With tryptophan as the probe solute, it was observed that the BSA immobilized by this method had a better ability to distinguish enantiomers than that activated by glutaric dialdehyde. This may be due to the well-maintained BSA conformation and the larger amount of BSA immobilized on the silica gel. The BSA-CSP prepared by this method was relatively stable under experimental conditions, and the resolution of 13 chiral compounds was achieved. The coupling reaction in this method is mild, reliable and reproducible; it is also suitable for the immobilization of various biopolymers in the preparation of bioreactor, biosensor and affinity chromatography columns.