Self‐assembly of Carbon Particles as a Heat Sink Coating to Promote Radiative Cooling

Novel composite carbon particles are developed that can self‐assemble as a coating on a substrate without a binder. These carbon particles were used as a coating to enhance thermal dissipation and their thermal conductivity, surface emissivity and cooling performance were measured. Carbon particles with both thiol and epoxy functional groups self‐assembled to form a coating on the surface of a heat sink without a binder, which greatly improved the thermal conductivity of the coating. Coating a heat sink with the carbon particles yielded a higher thermal conductivity and emissivity than could be obtained with the addition of binder in the conventional approach, and significantly enhanced the cooling performance. In addition, the cooling performance of the carbon nanotube outperformed all other particles when coated on a substrate, because it had the highest thermal conductivity and good radiation emissivity. We developed an equation to describe the various parameters affecting the cooling performance of the thermally dissipative coating. This equation was confirmed by the experimental data.     

Synthesis and Characterization of Iron Nanowires

The iron nanowires can be fabricated via the process in which sodium borohydride reduces iron salts in external magnetic field. The iron nanowires are found to be covered by passivated layers of iron oxide which prevent the oxidation of iron nanowires. In this process, the boron will include in iron nanowires. The average length and diameter of iron nanowires is around 1.2 micrometers and 60 nanometers, respectively. According to ICP results, the contents of B and Fe are about 1.98 wt% and 87.04 wt%, respectively, in iron nanowires. A wide variety of equipment is used to investigate the morphological, microchemical, and structural characteristics of the newly synthesized iron nanowires ––– e.g., XRD, FE‐SEM, HR‐TEM, VSM and XANES. XANES analysis indicates the boron in iron nanowires exists in the form of B₂O₃. The saturation magnetization and the coercive force of iron nanowires are 157.93 emu/g and 9.74 Oe, respectively. In‐situ images of synthesized iron nanowires during reduction process in magnetic field are observed by NSRRC transmission X‐ray microscope. Thus, this study develop a novel process to produce iron nanowires with large quantitates and can control its length and diameter by various the concentration of precursors for various applications.     

Easy One‐Pot Synthesis of 1‐Monosubstituted Aliphatic 1,2,3‐Triazoles from Aliphatic Halides,Sodium Azide and Propiolic Acid by a Click Cycloaddition/Decarboxylation Process

1‐Monosubstituted aliphatic 1,2,3‐triazoles were synthesized by a one‐pot reaction from aliphatic halides (Cl and Br), sodium azide and propiolic acid. The yields ranged from moderate to good. The reaction was easily carried out in DMF with Cs₂CO₃ at 100°C by copper‐catalyzed click cycloaddition/decarboxylation.     

Decontamination of radionuclides on construction materials

A wide variety of materials can become contaminated by radionuclides, either from a terrorist attack or an industrial or nuclear accident. The final disposition of these materials depends, in large part, on the effectiveness of decontamination measures. This study reports on investigations into the decontamination of a selection of building materials. The aim has been to find an effective, easy-to-use and inexpensive decontamination system for radionuclides of cesium and cobalt, considering both the chemical and physical nature of these potential contaminants. The basic method investigated was surface washing, due to its ease and simplicity. In the present study, a basic decontamination formulation was modified by adding isotope-specific sequestering agents, to enhance the removal of cesium(I) and cobalt(II) from such construction materials as concrete, marble, aluminum and painted steel. Spiking solutions contained ¹³⁴Cs or ⁶⁰Co, which were prepared by neutron activation in the SLOWPOKE-2 nuclear reactor facility at the Royal Military College of Canada. Gamma spectroscopy was used to determine the decontamination efficiency. The results showed that the addition of sequestering agents generally improved the radiological decontamination. Although the washing of both cesium and cobalt from non-porous materials, such as aluminum and painted steel, achieved a 90–95 % removal, the decontamination of concrete and marble was more challenging, due to the porous nature of the materials. Nevertheless, the removal efficiency from 6-year-old concrete increased from 10 % to approximately 50 % for cobalt(II), and from 18 to 55 % for cesium(I), with the use of isotope binding agents, as opposed to a simple water wash.     

聚合物驱蚊剂的慢释放研究

本文研究了丙烯酸酯共聚物载体对驱蚊剂N,N-二乙基间甲苯酰胺(DETA)慢释放行为的控制,探讨了单体配比、共聚物分子量以及DETA含量对释放速率的影响。结果表明。增加亲水性单体丙烯酸(AA),可提高DETA的释放速率;降低共聚物数均分子量,会减少DETA的释放量;剂型中DETA含量与释放量存在线性正比关系,但DETA的含量增加并不导致释放有效时间的线性增加。本文还就共聚物膜的透湿性和碱溶性作了研究,亲水性单体AA的增加同样导致透湿性和碱溶性的增加。制备的聚合物驱蚊剂经现场应用试验,表明具有良好的长效驱蚊特性。     

A ULFC method for d(4)(D(2d)) ions and a study of the spin singlets contributions to zero-field splitting of Cr(2+) ions in zinc sulfide crystals

A simple theoretical method is shown to yield a detailed explanation of numerous EPR parameters for a d4 configuration ion in tetragonal ligand field. Using the unified ligand-field-coupling (ULFC) scheme, the formulas relating the microscopic spin Hamiltonian parameters with the crystal structure parameters are derived. On the basis of the theoretical formulas, the 210 x 210 complete energy matrices including all the spin states are constructed within a strong field representation. By diagonalizing the complete energy matrices, the local lattice structure and Jahn-Teller energy of Cr(2+) ions in ZnS:Cr(2+) system have been investigated. It is found that the theoretical results are in good agreement with the experimental values. Moreover, the contributions of the spin singlets to the zero-field splitting (ZFS) parameters of Cr(2+) ions in ZnS crystals are investigated for the first time. The results indicate that the spin singlets contributions to ZFS parameter b(0)(4) is negligible, but the contributions to ZFS parameters b(0)(4) and b(4)(4) cannot be neglected.     

溶胶-凝胶法制备高取向Bi4Ti3O12/SrTiO3(100)薄膜

Bi4Ti3O12具有良好的铁电、电光等性能山、特别是Bi4Ti3O12薄膜很适合作永久性存储材料，也可用于电光器件问．在微电子学、光电子学、集成光学、集成铁电学等领域均有广泛开发和应用前景，国外已用溅射法、激光沉积法制备出c轴取向Bi。Ti3Ol。薄膜【’，＼山东大学用MOCVD法制     

氰戊菊酯立体异构体在手性键合相上的分析

本文介绍了采用高效液相色谱法在(R)-N-3,5-二硝基苯甲酰苯甘氨酸手性键合相上氰戊菊酯的四个立体异构体的分离,以外消旋氰戊菊酯样品为参照,计算了光学活性氰戊菊酯样品的四个立体异构体的百分含量,确定了在手性键合相上氰戊菊酯四个立体异构体构型的流出顺序为SR→RS→SS→RR。     

μ-氧-双(三苄基锡)的合成及晶体结构

用X-射线衍射方法测定了μ-氧-双(三苄基锡)的晶体结构，该化合物晶体属三方晶系，空间群为R3，晶体学参数：a=b=c=0.9646 nm，α=β=γ=83.99(1)°，V=0.8840 nm³, Z=1, D_x=1.503 g·cm^-3, μ=14.473 cm^-1, F(000)=402, R相似文献   

洁净环境中的电化学

本文综述了电化学技术在洁净环境方面所取得的进展。电化学技术因其独特的功能, 可以有效地应用于处理废气、废水和废渣, 转化与利用二氧化碳, 饮用水消毒, 回收资源, 提供洁净、高效的能源, 连续监测环境的状态。电化学工业的工艺改进大大地减小了对环境的危害。