Preparation of well-aligned carbon nanotubes by pyrolysis of phenolic resin in anodic alumina pores

Well-aligned carbon nanotubes (CNTs) of high quality were synthesized by pyrolysis of phenolic resin at 800 °C in anodic alumina oxide (AAO) pores under argon protection. The innocuous source materials and safe operational conditions permit this method to synthesize well-aligned CNTs in large-scale and low cost. The formation mechanism of the synthesized CNTs is also proposed in this work by a series of visual sketches and is proved with obvious evidence. Firstly, phenolic resin nanotubes form in the template pores through the evaporation of solvent. Heat treatment then transfers these tubes into CNTs.     

Synthesis and characterization of liquid crystalline side‐chain block copolymers containing luminescent 4,4′‐bis(biphenyl)fluorene pendants

A series of new liquid crystalline homopolymers, copolymers, and block copolymers were polymerized from styrene‐macroinitiator ( SMi ) and methacrylates with pendent 4,4′‐bis(biphenyl)fluorene ( M1 ) and biphenyl‐4‐ylfluorene ( M2 ) groups through atom transfer radical polymerization (ATRP). The number‐average molecular weights (Mn) of polymers P1 ‐ P4 were 10,007, 14,852, 6,275, and 10,463 g mol^?1 with polydispersity indices values of 1.21, 1.15, 1.31, and 1.22, respectively. All polymers exhibit the nematic phase. The thermal, mesogenic, and photoluminescent properties of all polymers were investigated. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4564–4572, 2007     

Multi-valued solutions and branch point singularities for nonlinear hyperbolic or elliptic systems

Multi-valued solutions are constructed for 2 × 2 first-order systems using a generalization of the hodograph transformation. The solution is found as a complex analytic function on a complex Riemann surface for which the branch points move as part of the solution. The branch point singularities are envelopes for the characteristics and thus move at the characteristic speeds. We perform an analysis of stability of these singularities with respect to perturbations of the initial data. The generic singularity types are folds, cusps, and nondegenerate umbilic points with non-zero 3-jet. An isolated singularity is generically a square root branch point corresponding to a fold. Two types of collisions between singularities are generic: At a “tangential” collision between two singularities moving at the same characteristic speed, a cube root branch point is formed, corresponding to a cusp. A “non-tangential” collision, between two square root branch points moving at different characteristic speeds, remains a square root branch point at the collision and corresponds to a nondegenerate umbilic point. These results are also valid for a diagonalizable n-th order system for which there are exactly two speeds. © 1993 John Wiley & Sons, Inc.     

Working group report: Flavor physics and model building

This is the report of flavor physics and model building working group at WHEPP-9. While activites in flavor physics have been mainly focused on B-physics, those in model building have been primarily devoted to neutrino physics. We present summary of working group discussions carried out during the workshop in the above fields, and also briefly review the progress made in some projects subsequently.     

Ge_x Si_(1-x)/Si超晶格中纵声学声子的喇曼散射强度研究

本文用光弹理论,在全面考虑了超晶格中两种材料的声速,质量密度和光弹常数存在差别的基础上,计算了Ge_xSi_(1-x)/Si超晶格中折迭纵声学声子的喇曼散射强度,在高达50cm~(-1)的频率范围内,理论值和实验符合得很好。     

Synthesis of the D-Galactopyranoside Derivative of C_(60)

ThefascinatingsbocturesandpropertiesoffullereneshaveoPeneduPanewfieldofchendstry.Inparticular,F.Wudletal.l'2haveshownthatwatersofubleC6ocomPoundsinhibittheHITVen-zymesprotease(HIVP)andreversetranscriPtase(HIVRT).IthasbeenafocusofstUdytoinvestigatethebiologicalactivitiesofthesenovelsubstances.Fortheirpossiblemedicaluses,tolinkC6omoleculetonaturalProductssuchassugars,pephdes,amioacides,andsoonisanimPortantmethodinthisfield.Vasella3reportedthefirstglucosidederivativeofC6o'InthispaPer,w…     

Polymerization of cyclopentadiene initiated by methylaluminoxane

The polymerization of cyclopentadiene (CPD) was effectively initiated by methylaluminoxane (MAO) to generate poly(cyclopentadiene) (polyCPD). The effects on the polymerization of some reaction parameters such as the monomer concentration, the initiator concentration, and solvents were investigated. The conversion of CPD was monitored with gas chromatography to investigate the reaction kinetics. The polymerization rate was proportional to the concentrations of MAO in the first order and of the CPD monomer in the second order, and a reasonable cationic polymerization mechanism was suggested on the basis of the kinetic study. PolyCPD obtained at a low temperature could be dissolved in toluene or chloroform, and this indicated lower cross‐coupling during the polymerization reaction. ¹H NMR and IR analysis of the polymer indicated that there were almost equal amounts of 1,2‐enchainment and 1,4‐enchainment in the polymer chain. The measurement of polyCPD showed its unique properties as a potential candidate for stable wrappings or electronic packaging materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 264–272, 2006     

A copper‐based reverse atom‐transfer radical polymerization process for the living radical polymerization of polyacrylonitrile

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living radical polymerization of acrylonitrile (AN). A hexasubstituted ethane thermal iniferter, diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS), was firstly used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 57.4 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 226–231, 2006     

Synthesis of polyacrylonitrile via reverse atom transfer radical polymerization catalyzed by FeCl3/isophthalic acid

FeCl₃ coordinated by isophthalic acid was first used as a catalyst in the azobisisobutyronitrile‐initiated reverse atom transfer radical polymerization of acrylonitrile. N,N‐Dimethylformamide was used as a solvent to improve the solubility of the ligand. An FeCl₃‐to‐isophthalic acid ratio of 0.5 not only gave the best control of the molecular weight and its distribution but also provided rather a rapid reaction rate. The effects of different solvents on the polymerization of acrylonitrile were also investigated. The rate of the polymerization in N,N‐dimethylformamide was faster than that in propylene carbonate and toluene. The molecular weight of polyacrylonitrile agreed reasonably well with the theoretical molecular weight in N,N‐dimethylformamide. The rate of polymerization increased with increasing polymerization temperature, and the apparent activation energy was calculated to be 59.9 kJ mol^?1. Reverse atom transfer radical polymerization was first used to successfully synthesize acrylonitrile polymers with a molecular weight higher than 80,000 and a narrow polydispersity as low as 1.22. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 219–225, 2006     

Enhanced transmission of electromagnetic waves through metamaterials

This paper reviews our recent experimental and simulation results regarding the electromagnetic wave transmission through three configurations of sandwiching structures of metamaterials: a metallic mesh sandwiched between two identical layers composed of split rings, metallic fractals, and fractal slits, respectively. We observed the enhanced transmission of the waves through these three types of sandwiching composites with respect to the opaque metallic mesh. The locations of the transmission peaks in the spectrum are associated closely with the band characteristics of the sandwiching layer by appearing either on the left- or the right-hand side of its band. PACS 41.20.Jb; 42.70.Qs; 78.20.-e; 42.25.Bs; 47.53.+n