Glassy carbon and boron doped glassy carbon electrodes for voltammetric determination of linuron herbicide in the selected samples

In this study the application of home-made unmodified (GC) and bulk modified boron doped glassy carbon (GCB) electrodes for the voltammetric determination of the linuron was investigated. The electrodes were synthesized with a moderate temperature treatment (1000°C). Obtained results were compared with the electrochemical determination of the linuron using a commercial glassy carbon electrode (GC-Metrohm). The peak potential (E _p ) of linuron oxidation in 0.1 mol dm⁻³ H₂SO₄ as electrolyte was similar for all applied electrodes: 1.31, 1.34 and 1.28 V for GCB, GC and GC-Metrohm electrodes, respectively. Potential of linuron oxidation and current density depend on the pH of supporting electrolyte. Applying GCB and GC-Metrohm electrodes the most intensive electrochemical response for linuron was obtained in strongly acidic solution (0.1 mol dm⁻³ H₂SO₄). Applying the boron doped glassy carbon electrode the broadest linear range (0.005–0.1 μmol cm⁻³) for the linuron determination was obtained. The results of voltammetric determination of the linuron in spiked water samples showed good correlation between added and found amounts of linuron and also are in good agreement with the results obtained by HPLC-UV method. This appears to be the first application of a boron doped glassy carbon electrode for voltammetric determination of the environmental important compounds.      

Inhibitive properties and surface morphology of a group of heterocyclic diazoles as inhibitors for acidic iron corrosion

The heterocyclic diazoles 3-amino-1H-isoindole, indazole, imidazole, 4-bromoimidazole, 4-methylimidazole, pyrazole, 4-nitropyrazole, and 4-sulfopyrazole were investigated as corrosion inhibitors of iron in 1 M HCl using ac and dc techniques. The polarization curves showed a decrease in corrosion current for the inhibitor-containing solution. Impedance spectra demonstrate that the charge-transfer resistance in the presence of these inhibitors was greater than in inhibitor-free solution, except for 4-nitropyrazole. The resistance increased with inhibitor concentration and with immersion time. The structural and electronic parameters of these diazoles were calculated using computational methodologies. The elemental composition and the speciation of the treated surfaces were investigated via XPS measurements, and morphological changes were monitored by vertical scanning interferometery.     

Atomic force microscopy of soil and stream fulvic acids

Atomic force microscopy (AFM) was used to image fulvic acid (FA) deposited from aqueous solution on to the basal-plane surfaces of freshly cleaved muscovite, and allowed to air dry. Two fulvic acid samples were used: a soil fulvic acid (SFA) prepared by NaOH extraction from a muck soil underlying a freshwater fen in the New Jersey Pinelands and the IHSS standard Suwannee River fulvic acid (SRFA). The use of tapping-mode AFM (TMAFM), a relatively new technique which reduces the lateral frictional forces generally associated with contact-mode AFM, allowed excellent images of delicate FA structures to be obtained with minimal sample disturbance. Four main structures were observed on SFA. At low concentrations, sponge-like structures consisting of rings ( 15 nm in diameter) appeared, along with small spheres (10–50 nm). At higher concentrations, aggregates of spheres formed branches and chain-like assemblies. At very high surface coverage, perforated sheets were observed. On some samples, all of these structures were apparent, perhaps owing to concentration gradients on drying. SRFA samples were only imagined at higher concentrations. Spheres, aggregated branches, and perforated sheets were apparent. The results agree with previous work by Stevenson and Schnitzer [Soil Sci., 133(1992) 179], who applied TEM to soil FAs freeze-dried on muscovite. However, the TEM images did not detect the smaller spheres and sponge-like structures observed by AFM at low concentrations. The relevance of imaging dried samples remains questionable; hence, it is hoped in the future to use new in situ TMAFM to image FAs sorbed to surfaces in solution. Although TMAFM provided excellent images, a variety of artifacts and potential problems were encountered, as discussed.     

Mechanistic study of the photochemical hydroxide ion release from 9-hydroxy-10-methyl-9-phenyl-9,10-dihydroacridine

The excited-state behavior of 9-hydroxy-10-methyl-9-phenyl-9,10-dihydroacridine and its derivative, 9-methoxy-10-methyl-9-phenyl-9,10-dihydroacridine (AcrOR, R = H, Me), was studied via femtosecond and nanosecond UV-vis transient absorption spectroscopy. The solvent effects on C-O bond cleavage were clearly identified: a fast heterolytic cleavage (τ = 108 ps) was observed in protic solvents, while intersystem crossing was observed in aprotic solvents. Fast heterolysis generates 10-methyl-9-phenylacridinium (Acr(+)) and (-)OH, which have a long recombination lifetime (no signal decay was observed within 100 μs). AcrOH exhibits the characteristic behavior needed for its utilization as a chromophore in the pOH jump experiment.     

Crystallization-Enhanced Emission and Room-Temperature Phosphorescence of Cyclic Triimidazole-Monohexyl Thiophene Derivatives

The development of organic room-temperature phosphorescent (ORTP) materials represents an active field of research due to their significant advantages with respect to their organometallic counterparts. Two cyclic triimidazole (TT) derivatives bearing one and three hexyl-thiophene moieties, TT-HThio and TT-(HThio)₃, have been prepared and characterized. Both compounds display enhanced quantum yields in their crystalline form with respect to those in a solution state, revealing crystallization-enhanced emissive (CEE) behavior. Importantly, while single fluorescence is observed in solution, crystalline powders also feature dual ORTP, whose respective molecular and aggregate origins have been disclosed through X-ray diffraction analysis and DFT/TDDFT calculations. The relation between the photophysical properties of TT-HThio and its crystallinity degree has been confirmed by a decrease in photoluminescent quantum yield (Φ) and loss of vibronic resolution when its crystals are ground in a mortar, revealing mechanochromic behavior and confirming CEE features.     

Plasma biomarker identification in S-adenosylhomocysteine hydrolase deficiency

S-Adenosylhomocysteine hydrolase (AHCY) deficiency is a rare congenital disorder in methionine metabolism clinically characterized by white matter atrophy, delayed myelination, slowly progressive myopathy, retarded psychomotor development and mildly active chronic hepatitis. In the present study, we utilized a comparative proteomics strategy based on 2-DE/MALDI-MS and LC/ESI-MS to analyze plasma proteins from three AHCY-deficient patients prior to and after receiving dietary treatment designed to alleviate disease symptoms. Obtained results revealed candidate biomarkers for the detection of myopathy specifically associated with AHCY deficiency, such as carbonic anhydrase 3, creatine kinase, and thrombospondin 4. Several proteins mediating T-cell activation and function were identified as well, including attractin and diacylglycerol kinase α. Further validation and functional analysis of identified proteins with clinical value would ensure that these biomarkers make their way into routine diagnosis and management of AHCY deficiency.     

Thermolysis and photolysis of 2‐ethyl‐4‐nitro‐1(2H)‐isoquinolinium hydroperoxide

The thermal and light‐induced O ? O bond breaking of 2‐ethyl‐4‐nitro‐1(2H)‐isoquinolinium hydroperoxide (IQOOH) were studied using ¹H NMR, steady‐state UV/vis spectroscopy, femtosecond UV/vis transient absorption (fs TA) and time‐dependent density functional theory (TD DFT) calculations. Thermal O ? O bond breaking occurs at room temperature to generate water and the corresponding amide. The rate of this reaction, k = 5.4 · 10^?6 s^?1, is higher than the analogous rates of simple alkyl and aryl hydroperoxides; however, the rate significantly decreases in the presence of small amounts of methanol. The calculated structure of the transition state suggests that the thermolysis is facilitated by a 1,2 proton shift. The photochemical process yields the same products, as confirmed using NMR and UV/vis spectroscopy. However, the quantum yield for the photolysis is low (Φ = 0.7%). Fs TA studies provide additional detail of the photochemical process and suggest that the S₁ state of IQOOH undergoes fast internal conversion to the ground state, and this process competes with the excited‐state O ? O bond breaking. This result was supported by the fact that the model compound IQOH exhibits similar excited‐state decay lifetimes as IQOOH, which is assigned to the S₁ → S₀ internal conversion. Copyright © 2013 John Wiley & Sons, Ltd.     

Photoinduced electron transfer and geminate recombination in liquids on short time scales: Experiments and theory

The coupled processes of intermolecular photoinduced forward electron transfer and geminate recombination between the (hole) donor (Rhodamine 3B) and (hole) acceptors (N,N-dimethylaniline) are studied in three molecular liquids: acetonitrile, butyronitrile, and benzonitrile. Two color pump-probe experiments on time scales from approximately 100 fs to hundreds of picoseconds give information about the depletion of the donor excited state due to forward electron transfer and the survival kinetics of the radicals produced by forward electron transfer. The data are analyzed with a model presented previously that includes distance dependent forward and back electron transfer rates, donor and acceptor diffusion, solvent structure, and the hydrodynamic effect in a mean-field theory of through solvent electron transfer. The forward electron transfer is in the normal regime, and the Marcus equation for the distance dependence of the transfer rate is used. The forward electron transfer data for several concentrations in the three solvents are fitted to the theory with a single adjustable parameter, the electronic coupling matrix element Jf at contact. Within experimental error all concentrations in all three solvents are fitted with the same value of Jf. The geminate recombination (back transfer) is in the inverted region, and semiclassical treatment developed by Jortner [J. Chem. Phys. 64, 4860 (1976)] is used to describe the distance dependence of the back electron transfer. The data are fitted with the single adjustable parameter Jb. It is found that the value of Jb decreases as the solvent viscosity increases. Possible explanations are discussed.