Influence of High Peroxide Concentration on the Mechanical Properties of Cross-Linked Low Density Polyethylene

In this paper are presented the static and dynamic mechanical investigation of chemically cross-linked low density polyethylene (XLPE) prepared in our laboratory. This polymer has been tested mechanically at different frequencies, amplitudes, and temperatures as a function of cross-link density which is indicated to some extent by the amount of peroxide used in the cross-linking. The main findings can be described as follows: mechanical damping in XLPE at the α-relaxation point as a function of peroxide concentration is different for shear and compression modes of deformation. Moreover, the dynamic investigation at very small amplitudes indicated two relatively rigid structures. One structure at low concentration of peroxide is attributed to excessive crystallinity; the other one at the high peroxide concentration is probably due to the very regular and perfect polyethylene network. These two interesting structures are not detected by dynamical testing with large amplitudes. As far as Young's modulus as a function of peroxide concentration is concerned, we conclude that in this polymer this factor does not depend on the crystallinity but on changes of the so-called hard amorphous phase. These findings are consistent with our previous structural investigation.     

Solid phase microextraction fills the gap in tissue sampling protocols

Metabolomics and biomarkers discovery are an integral part of bioanalysis. However, untargeted tissue analysis remains as the bottleneck of such studies due to the invasiveness of sample collection, as well as the laborious and time-consuming sample preparation protocols. In the current study, technology integrating in vivo sampling, sample preparation and global extraction of metabolites – solid phase microextraction was presented and evaluated during liver and lung transplantation in pig model. Sampling approaches, including selection of the probe, transportation, storage conditions and analyte coverage were discussed. The applicability of the method for metabolomics studies was demonstrated during lung transplantation experiments.     

Electrochemical Characteristics of Discrete,Uniform, and Monodispersed Hollow Mesoporous Carbon Spheres in Double‐Layered Supercapacitors

Core–shell‐structured mesoporous silica spheres were prepared by using n‐octadecyltrimethoxysilane (C18TMS) as the surfactant. Hollow mesoporous carbon spheres with controllable diameters were fabricated from core–shell‐structured mesoporous silica sphere templates by chemical vapor deposition (CVD). By controlling the thickness of the silica shell, hollow carbon spheres (HCSs) with different diameters can be obtained. The use of ethylene as the carbon precursor in the CVD process produces the materials in a single step without the need to remove the surfactant. The mechanism of formation and the role played by the surfactant, C18TMS, are investigated. The materials have large potential in double‐layer supercapacitors, and their electrochemical properties were determined. HCSs with thicker mesoporous shells possess a larger surface area, which in turn increases their electrochemical capacitance. The samples prepared at a lower temperature also exhibit increased capacitance as a result of the Brunauer–Emmett–Teller (BET) area and larger pore size.     

Controlled Radical Polymerization

Various methods which lead to the control of molecular weight and polydispersities, and which allow for the preparation of block copolymers by radical polymerization are discussed. Thermal polymerizationof styrenes in the presence of stable radicals, polymerization of vinyl acetate and methyl methacrylate in the presence of chromium complexed by macrocyclic ligands polymerization of vinyl acetate initiated by organoaluminum compounds complexed by dipyridyl and activated by stable radicals, as well as in the presence of phosphites, are described in detail.     

Methodological studies of the determination of 99Tc in matrix-rich environmental samples

A few experiments testing technetium behavior at different conditions for complex matrixes (soils, sediments) were performed. It was confirmed that the incineration of samples soaked with ammonia can be done without technetium losses. Next, for the precipitation of iron(III) hydroxide at different pH levels, the degree of co-precipitation of technetium was studied. It can be helpful during purification of very matrix-rich and massive samples. Finally the technetium and rhenium fractionation during separation of technetium from the environmental samples was studied. This test clearly showed limitations for using Re as yield tracer during ⁹⁹Tc analyses in case of mineral matrixes.     

Square-wave adsorptive stripping voltammetric approaches at two in situ modified electrodes as first analytical methods for the quantitative determination of a new anticancer drug candidate

The two adsorptive stripping voltammetric approaches for detection and quantitative determination of diethyl (2E)-2-{(2E)-[1-(4-methylphenyl)imidazolidin-2-ylidene]hydrazinylidene}butanedioate (DIB)—a novel molecule of medical importance—using two sensitive sensors based on modified glassy carbon electrodes as reusable sensors, were developed for the first time. The proposed electrochemical methods are based on adsorptive/reductive behaviour of DIB at two modified carbonic electrodes: a bismuth film-modified glassy carbon electrode (BiF/GCE) and a lead film-modified glassy carbon electrode (PbF/GCE). The electron gain mechanism for the electrochemical reduction of DIB on both developed sensors was proposed for the first time. To achieve the highest sensitivity in adsorptive stripping determinations, various experimental variables (e.g. the composition and pH of the supporting electrolytes, deposition conditions of bismuth and lead films, concentrations of plating solutions, accumulation times and potentials of DIB, etc.) were extensively examined. The comparison of validation parameters obtained during the determination of DIB at two sensors was presented. The excellent linear correlation was found between the monitored adsorptive stripping voltammetric peak current and the DIB concentration in the range of 15–600 μg L⁻¹ at an accumulation time of 30 s (with LOD = 4.2 μg L⁻¹ and LOQ = 14.0 μg L⁻¹) using the BiF/GCE as a sensor. Furthermore, the excellent linear relationship was confirmed between the monitored adsorptive stripping voltammetric peak current and the DIB concentration in the range of 9–900 μg L⁻¹ at an accumulation time of 10 s (with better LOD = 1.5 μg L⁻¹ and LOQ = 5.0 μg L⁻¹), employing the PbF/GCE as a sensor. The two optimized adsorptive stripping voltammetric approaches—as facile, sensitive, reliable and inexpensive—were successfully used as first methods for the quantitative analysis of a novel anticancer agent (DIB) in its pure pharmaceutically acceptable form. However, the practical applicability of square-wave adsorptive stripping voltammetric determination of the electroactive DIB molecule at a PbF/GCE, as the modified electrode of higher sensitivity, was presented after its successful solid phase extraction from a real serum sample.

     

Spontaneous formation of liquid crystalline phases and phase transitions in highly concentrated plasmid DNA

The liquid crystalline (LC) properties of two supercoiled plasmid DNA samples, pBSK (2958 bp) and pGEM (3000 bp), have been studied using polarised light microscopy (PLM), circular dichroism (CD) and UV–Vis spectroscopy. The influence of methods of isolation on plasmid LC behaviour is described, and using PLM we have demonstrated the spontaneous formation of cholesteric fingerprint-like textures. Preliminary studies of LC phase transitions in pGEM show the irreversibility of LC phase formation, as a consequence of changes in the tertiary structure of supercoiled plasmids. Using UV–Vis spectroscopy a hyperchromic effect was observed with increasing temperature. The CD spectra clearly showed structural changes, and probably mismatching of DNA bases, during cooling. Finally, we have observed an irreversible phase transition in plasmid DNA which is very different from that previously reported in linear DNA.     

Simultaneous isolation and determination of esculin and rutin in natural materials using SPE and HPLC

Summary Esculin (ESC) and rutin (RUT) have been simultaneously isolated from pharmaceutical natural materials by solid phase extraction (SPE). Determination of both substances was performed by reversed phase high performance liquid chromatography (RPHPLC) with UV detection. Optimization of the separation conditions showed that simultaneous isolation and determination of rutin and esculin from pharmaceutical material was possible. The recovery obtained was not lower than 95±2%.