Silicate Xerogels with Dopant-Induced Chirality

A series of silicate xerogels with entrapped chiral amino acids have been obtained via sol-gel technology. The transparent, glassy samples obtained exhibit chirality in the bulk due to the presence of the entrapped asymmetric molecules. Measurements of the optical activity of the doped xerogel samples revealed that the entrapment did not significantly influence the optical activity observed for liquid solutions of the amino acids. Thus, the sol-gel method enables the preparation of amorphous optical materials exhibiting properties of strictly spatially defined molecular systems. Apart from the obvious optical applications, such porous materials with asymmetric centers might find interesting applications in chiral chemical syntheses and separations.     

Cell docking inside microwells within reversibly sealed microfluidic channels for fabricating multiphenotype cell arrays

We present a soft lithographic method to fabricate multiphenotype cell arrays by capturing cells within an array of reversibly sealed microfluidic channels. The technique uses reversible sealing of elastomeric polydimethylsiloxane (PDMS) molds on surfaces to sequentially deliver various fluids or cells onto specific locations on a substrate. Microwells on the substrate were used to capture and immobilize cells within low shear stress regions inside channels. By using an array of channels it was possible to deposit multiple cell types, such as hepatocytes, fibroblasts, and embryonic stem cells, on the substrates. Upon formation of the cell arrays on the substrate, the PDMS mold could be removed, generating a multiphenotype array of cells. In addition, the orthogonal alignment and subsequent attachment of a secondary array of channels on the patterned substrates could be used to deliver fluids to the patterned cells. The ability to position many cell types on particular regions within a two dimensional substrate could potentially lead to improved high-throughput methods applicable to drug screening and tissue engineering.     

<Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> application as a prospective approach for biosynthesis of pyruvic acid from glycerol

With the problems related to chemical methods of pyruvic acid (PA) synthesis, a fast-growing interest has been observed in research aiming at reducing the production cost of PA by applying biotechnological methods. This study aimed to investigate the potential applicability of Yarrowia lipolytica Wratislavia 1.31 yeast strain for valorisation of pure and crude glycerol through the production of industrially desired PA. Conditions required for the effective PA biosynthesis, i.e., pH value, thiamine concentration, agitation, and substrate concentration, were examined in batch and fed-batch cultivation modes. The efficient production of PA occurred under the limitation of thiamine (1 µg L^?1) and was stimulated by moderate pH (4.5) and agitation (800 rev min^?1) of the culture. Under optimal conditions, Y. lipolytica Wratislavia 1.31 was able to produce 85.2 g L^?1 of PA with volumetric productivity of 0.90 g L^?1 h^?1. The yield of PA biosynthesis reached a high level of 1.03 g g^?1. Obtained results confirmed the aptitude of Y. lipolytica yeast to produce high amounts of PA from simple glycerol-containing media. Presented process was very promising and might be considered as an attractive alternative for currently used chemical methods of PA synthesis.     

Influence of multiple processing on selected properties of poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate)

The effect of multiple (up to 10 times) injection molding of processed poly(3‐hydroxybutyrate‐co‐4‐hydroxybutyrate) (P(3,4HB)) on its phase transition temperatures, degree of crystallinity, degradation temperature, mass flow rate, mechanical properties, dynamic mechanical properties, and Charpy's impact strength is presented. The studies have shown that the multiple injection lowers the degree of crystallinity and the thermal stability of P(3,4HB). The mass flow rate values increased with increasing the injection number. It was found that the multiple injections had no substantial effect on the tensile strength up to 10 injection cycles and the tensile strength at break, tensile strain at tensile strength, and tensile strain at break up to 6 injection cycles. The maximum value of storage modulus at 30 °C and impact strength were recorded for sample after 4 cycles of injection, while the values of storage modulus at 120 °C increased with increase of the injection cycles. Copyright © 2015 John Wiley & Sons, Ltd.     

The application of ultrafiltration for treatment of ships generated oily wastewater

The wastewaters collected from ships were preliminary separated in harbour installation into an oil fraction (slop oil) and the aqueous phase. The oil phase was then separated from slop oil, and the resulting water phase was subjected to the treatment in a coagulation/flotation process. The effluent (oil content 7–13 ppm) from these processes was further purified in biological wastewater treatment plant. A composition of bilge water is variable what affects the efficiency of coagulation/flotation process and the effluents may contain a significant amount of oil residues. The purification of effluents from coagulation/flotation process was performed in this work with ultrafiltration (UF), using FP100 membranes. The turbidity of obtained UF permeate was varied in the range of 0.08–0.26 NTU and the oil content was at a level of 0.9–1.1 ppm. Such purified water can be utilized for rinsing the oil–water separation devices located in the wastewater treatment plant, instead of tap water used so far. The obtained UF retentate contained 30 ppm of oil can be recycled to the coagulation/flotation process. Fouling of UF membranes was observed during the separation process, however, the FP100 membranes were effective cleaned with alkaline cleaning agents P3 Ultrasil 11.     

Conjugated Schiff bases. VII—Decarbonylation of some 1,3-hetrodienes under electron impact

The mass spectra of some 1,3- heterodienes containing the 1-oxa-4-aza-butadiene system have been determined and the characteristic fragmentation pathways are discussed. The pathways suggested are supported by the appropriate metastables, the spectra of model compounds and by deuterium labelling. The 1, 3-heterodienes substituted by the thioarylamide group from ions involving participation of the sulphur atom.     

SPECTROSCOPIC STUDIES OF CUTANEOUS PHOTOSENSITIZING AGENTS—IV. THE PHOTOLYSIS OF BENOXAPROFEN, AN ANTI-INFLAMMATORY DRUG WITH PHOTOTOXIC PROPERTIES

Abstract— Benoxaprofen [2-(4-chlorophenyl)-α-methyl-5-benzoxazole acetic acid] is an anti-inflammatory drug that causes acute phototoxicity in many patients. Photolysis studies in organic solvents (ethanol, benzene, dimethylsulfoxide) showed that benoxaprofen underwent both Type I and Type II reactions. Irradiation of an anerobic solution of benoxaprofen in ethanol resulted in hydrogen abstraction from the solvent to yield hydroxyethyl and ethoxyl radicals. In the presence of oxygen, superoxide, singlet oxygen and hydroxyethyl radicals were detected. Photolysis of benoxaprofen in air-saturated benzene or dimethylsulfoxide gave superoxide. However, under anerobic conditions the drug yielded a carbon-centered radical in benzene that could not be identified. These findings suggest that both oxygen-dependent and oxygen-independent processes may be important in the phototoxic reactions of benoxaprofen.     

Die Ringinversions-Barriere in [2.2]Metacyclophan

From racemization studies on optically active [2.2]metacyclophanes substituted in position 4, the parameters of activation for the inversion of the tenmembered ring were found to be: G ₄₂₃ =31.5 kcal/mole, H =27.5 kcal/mole and S =–10 Cl/mole.Racemization does not occurvia bond forming or breaking; the value for the inversion barrier is not affected by substituents in position 4 and therefore corresponds to the value of unsubstituted [2.2]metacyclophane, whereas substituents in the bridge exert a distinct influence. These results can easily be explained on the basis of the isoconformational concept.

---

---

Mit 5 Abbildungen

---

Herrn Prof. Dr.O. Hoffmann-Ostenhof mit besten Wünschen zum 60. Geburtstag gewidmet.     

T-shaped platinum boryl complexes: synthesis and structure

A series of cationic T-shaped 14-electron boryl complexes of the type trans-[(Cy(3)P)(2)Pt{B(X)X'}](+) (X=Br; X'=ortho-tolyl, tBu, NMe(2), piperidyl, Br; XX'=(NMe(2))(2), catecholato) were synthesized by halide abstraction from trans-[(Cy(3)P)(2)Pt(Br){B(X)X'}] (Cy=cyclohexyl) with Na[BAr(f) (4)] (Ar(f)=3,5-(CF(3))(2)C(6)H(3)), K[B(C(6)F(5))(4)], or Na[BPh(4)]. X-ray diffraction studies were performed on all compounds, revealing a subtle correlation between the trans-influence of the boryl moiety and the Pt--H and Pt--C separations. However, no notable agostic C--H interaction with the platinum center was detected. trans-[(Cy(3)P)(2)Pt(BCat)](+) (Cat=catecholato), the complex with the shortest Pt--H and Pt--C distances, was treated with Lewis bases (L), forming compounds of the type trans-[(Cy(3)P)(2)Pt(L)(BCat)](+), thus proving a decisive influence of the degree of trans-influence exerted by the boryl ligands on the chemical reactivity of the title complexes. Another point that was investigated and clarified is the different behavior of trans-[(Cy(3)P)(2)Pt(Br){B(Br)Mes}] (Mes=mesityl) towards K[B(C(6)F(5))(4)] with formation of the borylene species trans-[(Cy(3)P)(2)Pt(Br)(BMes)](+).     

Characterisation of the steady state tube furnace (ISO TS 19700) for fire toxicity assessment

The steady state tube furnace (Purser furnace, ISO TS 19700) has been developed specifically to replicate the generation of toxic products from real fires under different fire conditions on a bench-scale. Steady state burning is achieved by driving the sample into a furnace of increasing heat flux at a fixed rate and recording the product yields over a steady state period in the middle of the run. The furnace, sample, and effluent dilution chamber temperature profiles are presented to characterise the conditions in the apparatus. The distribution of smoke in the mixing chamber has been investigated to demonstrate the efficiency of mixing in the effluent dilution chamber. The heat flux applied to the sample at various points through the furnace has been measured, showing that conditions vary from those typical of pre-flaming to fully developed fires. An initial investigation of the repeatability and interlaboratory reproducibility has been undertaken, showing acceptable low levels of uncertainty in the toxic product yields.