The effect of multimicrophone noise reduction systems on sound source localization by users of binaural hearing aids

This paper evaluates the influence of three multimicrophone noise reduction algorithms on the ability to localize sound sources. Two recently developed noise reduction techniques for binaural hearing aids were evaluated, namely, the binaural multichannel Wiener filter (MWF) and the binaural multichannel Wiener filter with partial noise estimate (MWF-N), together with a dual-monaural adaptive directional microphone (ADM), which is a widely used noise reduction approach in commercial hearing aids. The influence of the different algorithms on perceived sound source localization and their noise reduction performance was evaluated. It is shown that noise reduction algorithms can have a large influence on localization and that (a) the ADM only preserves localization in the forward direction over azimuths where limited or no noise reduction is obtained; (b) the MWF preserves localization of the target speech component but may distort localization of the noise component. The latter is dependent on signal-to-noise ratio and masking effects; (c) the MWF-N enables correct localization of both the speech and the noise components; (d) the statistical Wiener filter approach introduces a better combination of sound source localization and noise reduction performance than the ADM approach.     

Deformation-induced phosphorescence shift in a 2D elastically flexible organic single crystal: role of chalcogen-centered weak interactions

Mechanically responsive organic luminescent crystals are one of the promising choices of materials for flexible photonic devices. However, the change in phosphorescence emission as a function of the flexibility of a crystal has never been reported. Our current findings demonstrate two-dimensional (2D) and one-dimensional (1D) macroscopic elastic deformability, under mechanical stress, in elastically flexible single crystals of dibenzothiophene, and its brominated derivative, respectively. Unlike the presence of dual fluorescence (FL) and room temperature phosphorescence (RTP) in dibenzothiophene single crystals, the derivative was found to show only RTP. Interestingly, upon elastic deformation, single crystals of the dual emissive dibenzothiophene show a noticeable blue shift (∼20 nm) of RTP emission when compared to their pristine crystals (straight and naturally bent). However, their FL peaks remain nearly unchanged irrespective of the crystal deformation. A hierarchy of structure-elastic functionality to RTP modulation has been quantitatively mapped by rationalizing the role of chalcogen-involved weak interactions.

In response to macroscopic elastical bending, single crystals of dual emissive dibenzothiophene depict a significant blue shift (∼20 nm) of RTP emission when compared to their pristine crystals (straight and naturally bent).     

Crystal Structures and Thermal Behaviour of Lanthanide(III) Hexanoate 1, 10‐Phenanthroline Complexes, [M(C5H11CO2)3(phen)] and [Tm(C5H11CO2)2(NO3)(phen)]

Lanthanide(III) hexanoate 1, 10‐phenanthroline complexes crystallise in the space group P2₁/n. The compounds consist of dimers, whereby two lanthanide ions are held together by two bidentate bridging and two tridentate bridging carboxylate groups. The first coordination sphere of the lanthanide ions is completed by one bidentate chelating carboxylate group and by one bidentate 1, 10‐phenanthroline molecule, resulting in the coordination number 9. The dimers have a spherical form, which has important consequences for the thermal properties of complexes. The basic idea behind the preparation of this type of compounds is the stabilisation of the ionic lanthanide layer, so that the smaller lanthanide ions (from which the normal alkanoates do not show mesomorphism because they are too small) show liquid crystallinity. The stabilisation of the ionic layer was successful, expressed by the high melting temperatures, but mesomorphism is not observed. The absence of mesomorphism is related to the isotropic structure of the compounds. A lower symmetry is obtained when a hexanoate group is replaced by a nitrate group. Thulium(III) dihexanoate nitrate 1, 10‐phenanthroline crystallises in the space group P1¯. However, this compound also shows a spherical dimeric structure, but no mesomorphism.     

Diels-Alder reactions of fused pyran-2-ones with maleimides: efficient syntheses of benz[e]isoindoles and related systems

[reaction: see text] The Diels-Alder reaction of some substituted 5,6,7,8-tetrahydro-2H-1-benzopyran-2-ones (1a-f) with N-substituted maleimides (2a-c) leading to fused isoindole derivatives (5a-n, 7) or, in a few cases, to bridged double cycloadducts (fused bicyclo[2.2.2]octene derivatives) (6a-f) is presented. When X = CO, the first efficient, substituent-driven aromatization of an intermediary-formed cycloadduct was observed, resulting in substituted benz[e]isoindoles (5a-k). The same type of aromatization can also be achieved in an unprecedented catalysis with Rh/C.     

Novel extended tetrathiafulvalenes based on acetylenic spacers: synthesis and electronic properties

A selection of mono- and diacetylenic dithiafulvalenes was synthesized and employed for the construction of extended tetrathiafulvalenes (TTFs) with hexa-2,4-diyne-1,6-diylidene or deca-2,4,6,8-tetrayne-1,10-diylidene spacers between the two 1,3-dithiole rings. By stepwise acetylenic scaffolding using (E)-1,2-diethynylethene (DEE) building blocks, an extended TTF containing a total of 18 C(sp) and C(sp(2)) atoms in the spacer was prepared. The versatility of the acetylenic dithiafulvene modules was also established by the efficient synthesis of a thiophene-spaced TTF, employing a palladium-catalyzed cross-coupling reaction. The developed synthetic protocols allow functionalization of the extended TTFs in three general ways: with 1) peripheral substituents on the fulvalene cores, 2) alkynyl moieties laterally appended to the spacer, and 3) cobalt clusters involving acetylenic moieties. Strong chromophoric properties of the extended TTFs were revealed by linear and nonlinear optical spectroscopies. Extensive electrochemical studies and calculations on these compounds are also reported, as well as X-ray crystallographic analyses.     

Ac and dc electrical conductivity of polynuclear metal cluster compounds

Ac and dc electrical conductivity data are presented for two polynuclear metal cluster compounds Au₅₅(PPh)₃)₁₂Cl₆ and Pd₅₆₁Phen₃₆O₂₀₀. The temperature dependence of the low field dc conductivity increases with electrical field, the rate of increase becoming stronger with decreasing temperature. These results are compared with data for granular metal systems, and a close correspondence is observed. The conductivity is found to increase with frequency in analogy to what is observed in amorphous systems. A scaling law for low frequencies that has been recently proposed is shown to describe the data quite well.     

Ground-state equilibrium thermodynamics and switching kinetics of bistable [2]rotaxanes switched in solution, polymer gels, and molecular electronic devices

We report on the kinetics and ground-state thermodynamics associated with electrochemically driven molecular mechanical switching of three bistable [2]rotaxanes in acetonitrile solution, polymer electrolyte gels, and molecular-switch tunnel junctions (MSTJs). For all rotaxanes a pi-electron-deficient cyclobis(paraquat-p-phenylene) (CBPQT4+) ring component encircles one of two recognition sites within a dumbbell component. Two rotaxanes (RATTF4+ and RTTF4+) contain tetrathiafulvalene (TTF) and 1,5-dioxynaphthalene (DNP) recognition units, but different hydrophilic stoppers. For these rotaxanes, the CBPQT4+ ring encircles predominantly (>90 %) the TTF unit at equilibrium, and this equilibrium is relatively temperature independent. In the third rotaxane (RBPTTF4+), the TTF unit is replaced by a pi-extended analogue (a bispyrrolotetrathiafulvalene (BPTTF) unit), and the CBPQT4+ ring encircles almost equally both recognition sites at equilibrium. This equilibrium exhibits strong temperature dependence. These thermodynamic differences were rationalized by reference to binding constants obtained by isothermal titration calorimetry for the complexation of model guests by the CBPQT4+ host in acetonitrile. For all bistable rotaxanes, oxidation of the TTF (BPTTF) unit is accompanied by movement of the CBPQT4+ ring to the DNP site. Reduction back to TTF0 (BPTTF0) is followed by relaxation to the equilibrium distribution of translational isomers. The relaxation kinetics are strongly environmentally dependent, yet consistent with a single electromechanical-switching mechanism in acetonitrile, polymer electrolyte gels, and MSTJs. The ground-state equilibrium properties of all three bistable [2]rotaxanes were reflective of molecular structure in all environments. These results provide direct evidence for the control by molecular structure of the electronic properties exhibited by the MSTJs.     

Structure and dynamics of the CrIII ion in aqueous solution: Ab initio QM/MM molecular dynamics simulation

Structural and dynamical properties of the Cr(III) ion in aqueous solution have been investigated using a combined ab initio quantum mechanical/molecular mechanical (QM/MM) molecular dynamics simulation. The hydration structure of Cr(III) was determined in terms of radial distribution functions, coordination numbers, and angular distributions. The QM/MM simulation gives coordination numbers of 6 and 15.4 for the first and second hydration shell, respectively. The first hydration shell is kinetically very inert but by no means rigid and variations of the first hydration shell geometry lead to distinct splitting in the vibrational spectra of Cr(H(2)O)(6) (3+). A mean residence time of 22 ps was obtained for water ligands residing in the second hydration shell, which is remarkably shorter than the experimentally estimated value. The hydration energy of -1108 +/- 7 kcal/mol, obtained from the QM/MM simulation, corresponds well to the experimental hydration enthalpy value.     

Synthesis of 5-(phenylsulfanyl)-1,4-dihydropyrazine-2,3-diones via an unexpected microwave-assisted cascade reaction

An unprecedented route for the synthesis of N-1 substituted 5-(phenylsulfanyl)-1,4-dihydropyrazine-2,3-diones is disclosed starting from 5-chloro-3-(phenylsulfanyl)pyrazin-2(1H)-ones. The method comprises treatment of various 5-chloro-3-(phenylsulfanyl)pyrazin-2(1H)-ones with Na₂CO₃ in water under microwave irradiation providing the respective 5-(phenylsulfanyl)-1,4-dihydropyrazine-2,3-diones in good yields, via hydrolysis of the thioether bond and subsequent nucleophilic displacement of the chlorine by the in situ generated thiophenol. The obtained compounds are excellent precursors for the diversity oriented synthesis of pharmacologically active α,β-dicarbonyl compounds.