The potential of Raman spectroscopy for characterisation of the fatty acid unsaturation of salmon

Raman spectroscopy has been evaluated for characterisation of the degree of fatty acid unsaturation (iodine value) of salmon (Salmo salar). The Norwegian Quality Cuts from 50 salmon samples were obtained, and the samples provided an iodine value range of 147.8-170.0 g I₂/100 g fat, reflecting a normal variation of farmed salmon. Raman measurements were performed both on different spots of the intact salmon muscle, on ground salmon samples as well as on oil extracts, and partial least squares regression (PLSR) was utilised for calibration. The oil spectra provided better iodine value predictions than the other data sets, and a correlation coefficient of 0.87 with a root mean square error of cross-validation of 2.5 g I₂/100 g fat was achieved using only one PLSR component. The ground samples provided comparable results, but at least two PLSR components were needed. Higher prediction errors were obtained from Raman spectra of intact salmon muscle, and this may partly be explained by sampling uncertainties in the relation between Raman measurements and reference analysis. All PLSR models obtained were based on chemically sound regression coefficients, and thus information regarding fatty acid unsaturation is readily available from Raman spectra even in systems with high contents of protein and water. The accuracy, the robustness and the low complexity of the PLSR models obtained suggest Raman spectroscopy as a promising method for rapid in-process control of the degree of unsaturation in salmon samples.     

Exploring Effects of Protease Choice and Protease Combinations in Enzymatic Protein Hydrolysis of Poultry By-Products

A study of the effects of single and combined protease hydrolysis on myofibrillar versus collagenous proteins of poultry by-products has been conducted. The aim was to contribute with knowledge for increased value creation of all constituents of these complex by-products. A rational approach was implemented for selecting proteases exhibiting the most different activity towards the major protein-rich constituents of mechanically deboned chicken residue (MDCR). An initial activity screening of 18 proteases on chicken meat, turkey tendons and MDCR was conducted. Based on weight yield, size exclusion chromatography (SEC) and SDS-PAGE, stem Bromelain and Endocut-02 were selected. Studies on hydrolysis of four different poultry by-products at 40 °C, evaluated by protein yield, SEC, and SDS-PAGE, indicate that the proteases’ selectivity difference can be utilized in tailor-making hydrolysates, enriched in either meat- and collagen-derived peptides or gelatin. Three modes of stem Bromelain and Endocut-02 combinations during hydrolysis of MDCR were performed and compared with single protease hydrolysis. All modes of the protease combinations resulted in a similar approximately 15% increase in product yield, with products exhibiting similar SEC and SDS-PAGE profiles. This shows that irrespective of the modes of combination, the use of more than one enzyme in hydrolysis of collagen-rich material can provide means to increase the total protein yield and ultimately contribute to increased value creation of poultry by-products.     

Expressing the Entropy of Lattice Systems as Sums of Conditional Entropies

Whether a system is to be considered complex or not depends on how one searches for correlations. We propose a general scheme for calculation of entropies in lattice systems that has high flexibility in how correlations are successively taken into account. Compared to the traditional approach for estimating the entropy density, in which successive approximations build on step-wise extensions of blocks of symbols, we show that one can take larger steps when collecting the statistics necessary to calculate the entropy density of the system. In one dimension this means that, instead of a single sweep over the system in which states are read sequentially, one take several sweeps with larger steps so that eventually the whole lattice is covered. This means that the information in correlations is captured in a different way, and in some situations this will lead to a considerably much faster convergence of the entropy density estimate as a function of the size of the configurations used in the estimate. The formalism is exemplified with both an example of a free energy minimisation scheme for the two-dimensional Ising model, and an example of increasingly complex spatial correlations generated by the time evolution of elementary cellular automaton rule 60.     

Elucidation of the mechanism of redox grafting of diazotated anthraquinone

Redox grafting of aryldiazonium salts containing redox units may be used to form exceptionally thick covalently attached conducting films, even in the micrometers range, in a controlled manner on glassy carbon and gold substrates. With the objective to investigate the mechanism of this process in detail, 1-anthraquinone (AQ) redox units were immobilized on these substrates by electroreduction of 9,10-dioxo-9,10-dihydroanthracene-1-diazonium tetrafluoroborate. Electrochemical quartz crystal microbalance was employed to follow the grafting process during a cyclic voltammetric sweep by recording the frequency change. The redox grafting is shown to have two mass gain regions/phases: an irreversible one due to the addition of AQ units to the substrate/film and a reversible one due to the association of cations from the supporting electrolyte with the AQ radical anions formed during the sweeping process. Scanning electrochemical microscopy was used to study the relationship between the conductivity of the film and the charging level of the AQ redox units in the grafted film. For that purpose, approach curves were recorded at a platinum ultramicroelectrode for AQ-containing films on gold and glassy carbon surfaces using the ferro/ferricyanide redox system as redox probe. It is concluded that the film growth has its origin in electron transfer processes occurring through the layer mediated by the redox moieties embedded in the organic film.     

Formation of high-capacity protein-adsorbing membranes through simple adsorption of poly(acrylic acid)-containing films at low pH

Layer-by-layer polyelectrolyte adsorption is a simple, convenient method for introducing ion-exchange sites in porous membranes. This study demonstrates that adsorption of poly(acrylic acid) (PAA)-containing films at pH 3 rather than pH 5 increases the protein-binding capacity of such polyelectrolyte-modified membranes 3-6-fold. The low adsorption pH generates a high density of -COOH groups that function as either ion-exchange sites or points for covalent immobilization of metal-ion complexes that selectively bind tagged proteins. When functionalized with nitrilotriacetate (NTA)-Ni(2+) complexes, membranes containing PAA/polyethylenimine (PEI)/PAA films bind 93 mg of histidine(6)-tagged (His-tagged) ubiquitin per cm(3) of membrane. Additionally these membranes isolate His-tagged COP9 signalosome complex subunit 8 from cell extracts and show >90% recovery of His-tagged ubiquitin. Although modification with polyelectrolyte films occurs by simply passing polyelectrolyte solutions through the membrane for as little as 5 min, with low-pH deposition the protein binding capacities of such membranes are as high as for membranes modified with polymer brushes and 2-3-fold higher than for commercially available immobilized metal affinity chromatography (IMAC) resins. Moreover, the buffer permeabilities of polyelectrolyte-modified membranes that bind His-tagged protein are ~30% of the corresponding permeabilities of unmodified membranes, so protein capture can occur rapidly with low-pressure drops. Even at a solution linear velocity of 570 cm/h, membranes modified with PAA/PEI/PAA exhibit a lysozyme dynamic binding capacity (capacity at 10% breakthrough) of ~40 mg/cm(3). Preliminary studies suggest that these membranes are stable under depyrogenation conditions (1 M NaOH).     

Effect of Low Temperature Air Plasma Treatment on Wetting and Flow Properties of Kaolinite Powders

It was found in this study that the air plasma treatment of particular kaolinite has led to the change of its wettability, which was reflected in the decreased values of water contact angles of wetting from 88.7° for virgin kaolinite to 86.3° for 30?min air plasma treated one. Plasma treated samples show higher average surface energies in the wide range of coverage regimes in comparison to the virgin samples as determined by inverse gas chromatography. Results of these measurements confirmed our assumption, that air plasma treatment activates surface energy of the crystal planes of the kaolinite as reflected in the broadened dispersive surface energy distribution after 10?min treatment time. However with prolonged 30?min treatment time the dispersive surface energy distribution profile was decreased. We assume, that the latter decrease reflects the distorsion of the crystal lattice of the kaolinite as confirmed by FTIR analysis as reflected in changes of Si?CO?CSi and Al₂O?CH characteristic absorption bands. Calculated dispersive surface free energy for 24?% surface coverage was increased from original 35?mJ/m² to 40.3 and 40.8?mJ/m² for 10 and 30?min treatment times. There were determined yield locus and flow function dependencies at different stress levels for virgin and different time plasma treated samples (flow index??ff _c , effective angle of internal friction???? _e , unconfined yield strength???? _c ). It was found that by plasma treatment the character of the flow was shifting from region of very cohesive (ff _c ?=?2.39) to the cohesive (ff _c ?=?3.19). For untreated samples effective angle of internal friction was decreased with increasing applied consolidation stress, while for plasma treated kaolinite it was increased.     

Atmospheric fate of methacrolein. 1. Peroxy radical isomerization following addition of OH and O2

Peroxy radicals formed by addition of OH and O(2) to the olefinic carbon atoms in methacrolein react with NO to form methacrolein hydroxy nitrate and hydroxyacetone. We observe that the ratio of these two compounds, however, unexpectedly decreases as the lifetime of the peroxy radical increases. We propose that this results from an isomerization involving the 1,4-H-shift of the aldehydic hydrogen atom to the peroxy group. The inferred rate (0.5 ± 0.3 s(-1) at T = 296 K) is consistent with estimates obtained from the potential energy surface determined by high level quantum calculations. The product, a hydroxy hydroperoxy carbonyl radical, decomposes rapidly, producing hydroxyacetone and re-forming OH. Simulations using a global chemical transport model suggest that most of the methacrolein hydroxy peroxy radicals formed in the atmosphere undergo isomerization and decomposition.     

Atmospheric fate of methacrolein. 2. Formation of lactone and implications for organic aerosol production

We investigate the oxidation of methacryloylperoxy nitrate (MPAN) and methacrylicperoxy acid (MPAA) by the hydroxyl radical (OH) theoretically, using both density functional theory [B3LYP] and explicitly correlated coupled cluster theory [CCSD(T)-F12]. These two compounds are produced following the abstraction of a hydrogen atom from methacrolein (MACR) by the OH radical. We use a RRKM master equation analysis to estimate that the oxidation of MPAN leads to formation of hydroxymethyl-methyl-α-lactone (HMML) in high yield. HMML production follows a low potential energy path from both MPAN and MPAA following addition of OH (via elimination of the NO(3) and OH from MPAN and MPAA, respectively). We suggest that the subsequent heterogeneous phase chemistry of HMML may be the route to formation of 2-methylglyceric acid, a common component of organic aerosol produced in the oxidation of methacrolein. Oxidation of acrolein, a photo-oxidation product from 1,3-butadiene, is found to follow a similar route generating hydroxymethyl-α-lactone (HML).