Synthesis of homoceramides, novel ceramide analogues, and their lack of effect on the growth of hippocampal neurons

The synthesis of a new series of D-erythro-homoceramide analogues is described. Several synthetic approaches were investigated. Homoceramides can be successfully synthesized from L-homoserine as chiral building block and a protected Weinreb-amide as a key intermediate. The synthesis of short-chain analogues with a heptyl side chain, as well as with a phenyl residue in the sphingoid part (instead of the naturally occurring tridecyl side chain), was effected. The homoceramides 15-17 and 24 were investigated for their potential to reverse the inhibitory effect of fumonisin B(1) on axonal growth. Unfortunately, none of the tested compounds showed any biological activity due to their lack of metabolism to glucosylhomoceramide.     

Analysis of the nonisothermal crystallization kinetics in three linear aromatic polyester systems

Melt or cold crystallization kinetics has a strong bearing on morphology and the extent of crystallization, which significantly affects the physical properties of polymeric materials. Nonisothermal crystallization kinetics are often analyzed by the classical Johnson–Mehl–Avrami–Kolmogorov (JMAK) model or one of its variants, even though they are based on an isothermal assumption. As a result, during the nonisothermal (e.g. constant heating or cooling rate) crystallization of polymeric material, different sets of model parameters are required to describe crystallization at different rates, thereby increasing the total number of model parameters. In addition, due to the uncorrelated nature of these model parameters with the cooling or heating rate, accurate modeling at any intermediate condition is not possible. In the present work, these two limitations of the conventional approach have been eliminated by exhibiting the existence of a functional relationship between cooling or heating rate and effective activation energy during nonisothermal melt or cold crystallization in three linear aromatic polyesters. Furthermore, it has been shown that when the JMAK model is used in conjunction with this functional relationship, it is possible to precisely predict the experimental nonisothermal melt or cold crystallization kinetics at any linear cooling or heating rate with a single set of model parameters.     

Influence of molecular architecture on the dewetting of thin polystyrene films

The control of dewetting for thin polymer films is a technical challenge and of significant academic interest. We have used polystyrene nanoparticles to inhibit dewetting of high molecular weight, linear polystyrene, demonstrating that molecular architecture has a unique effect on surface properties. Neutron reflectivity measurements were used to demonstrate that the nanoparticles were uniformly distributed in the thin (ca. 40 nm) film prior to high temperature annealing, yet after annealing, they were found to separate to the solid substrate, a silanized silicon wafer. Dewetting was eliminated when the nanoparticles separated to form a monolayer or above while below this surface coverage the dewetting dynamics was severely retarded. Blending linear polystyrene of similar molecular weight to the polystyrene nanoparticle with the high molecular weight polystyrene did not eliminate dewetting.     

Ultracentrifugation Method to Measure Water-Soluble Monomer Incorporation in Latex

Emulsion copolymerizations involving water-soluble functional monomers such as N-methylolacrylamide often result in the formation of water-soluble polymer that remains in the aqueous phase of the latex. A simple procedure is developed to determine the amount of water-soluble polymer in the aqueous phase of a high-solids latex using ultracentrifugation. Dilution of the latex with water is usually found necessary for good separation during ultracentrifugation. If the latex contains a surface-active species (surfactant) in amounts comparable to the amount of water-soluble polymer, calculation of the amount of water-soluble polymer in the serum of the original latex will require information about dilution dependent partitioning of the surfactant between the surface of the particles and the aqueous phase. This paper outlines a procedure that enables determination of the amount of water-soluble polymer in the aqueous phase of the original latex, by ultracentrifugation of the latex diluted to different concentrations. The procedure also gives the Henrys constant for the adsorption of the surfactant on the surface of the polymer particles in the latex.     

A molecular beam study of the NO + CO reaction on Pd(111) surfaces

Nitric oxide (NO) reduction with carbon monoxide (CO) on the Pd(111) surface was studied under isothermal conditions by molecular beam techniques as a function of temperature, NO:CO beam composition, and beam flux. Systematic experiments were performed under transient and steady state conditions. Displacement of adsorbed CO by NO in the transient state of the reaction was observed at temperatures between 375 and 475 K for all the NO:CO compositions studied. NO accumulation occurs on Pd(111) surface under steady state conditions, below 475 K, due to stronger chemisorption of NO. The steady state reaction rates attain a maximum at about 475 K, nearly independent of beam composition. N2 was found to be the major product of the reduction, along with a minor production of N2O. The production of N2 and N2O indicates molecular and dissociative adsorption of NO on Pd(111) at temperatures up to 525 K. Postreaction TPD measurements were performed in order to determine the nitrogen coverage under steady-state conditions. Finally, the results are discussed with respect to the rate-controlling character of the different elementary steps of the reaction system.     

Global variations in peak bone mass as studied by dual-energy X-ray absorptiometry

In 1994, the International Atomic Energy Agency (IAEA) initiated a 5-year Co-ordinated Research Project (CRP) to determine geographical and racial differences in peak bone mineral density (BMD) in men and women aged 15-49 years. The study demonstrates that there are distinct global differences in BMD at the hip and spine in both men and women approximating to one population standard deviation between populations with the highest and lowest BMD. These differences persist following adjustments for age, sex and body size. Such information is valuable in understanding the reasons for global differences in fracture rate and predicting future trends in fracture incidence. This revised version was published online in August 2006 with corrections to the Cover Date.     

A DSC Study on Cure Kinetics of HTPB-IPDI Urethane Reaction

The kinetics of theurethane-forming cure reaction of hydroxyl terminated polybutadiene (HTPB) with isophorone diisocyanate (IPDI) in presence of ferric tris (acetyl acetonate) (FeAA) catalyst was investigated using differential scanning calorimetry (DSC). The Arrhenius activation parameters, viz., activation energy E and pre-exponential factor A were evaluated using the non-isothermal integral Coats-Redfern equation. The cure reaction was catalysed by ferric acetyl acetonate (FeAA), as revealed from the decrease in reaction temperatures and the increase in rate constants; however, the computed activation energy did not show any correlation to the catalyst concentration. The values of E and A for the uncatalysed reaction at different heating rates showed interdependence through kinetic compensation (KC) effect. Using KC correction, E values were normalised for the value of A for the uncatalysed reaction under identical conditions. The normalised E values decreased exponentially with increase in concentration of FeAA, showing high propensity of the HTPB-IPDI system for catalysis.This revised version was published online in November 2005 with corrections to the Cover Date.     

Thermal expansion and heat capacity of dysprosium hafnate

Dysprosium hafnate is a candidate material for as control rods in nuclear reactor because dysprosium (Dy) and hafnium (Hf) have very high absorption cross-sections for neutrons. Dysprosium hafnate (Dy₂O₃·2HfO₂-fluorite phase solid solution) was prepared by solid-state as well as wet chemical routes. The fluorite phase of the compound was characterized by using X-ray diffraction (XRD). Thermal expansion characteristics were studied using high temperature X-ray diffraction (HTXRD) in the temperature range 298–1973 K. Heat capacity measurements of dysprosium hafnate were carried out using differential scanning calorimetry (DSC) in the temperature range 298–800 K. The room temperature lattice parameter and the coefficient of thermal expansion are 0.5194 nm and 7.69 × 10⁻⁶ K⁻¹, respectively. The heat capacity value at 298 K is 232 J mol⁻¹ K⁻¹.     

Evaluation of heat capacity measurements by temperature-modulated differential scanning calorimetry

Temperature-modulated differential scanning calorimetry (TMDSC) is known to have the ability to measure heat capacity of materials more accurately than the conventional differential scanning calorimeter. However, the accuracy of the measured heat capacity displays significant dependence on various experimental parameters such as period of modulation (p), amplitude of modulation (a), geometry of sample (g), heating rate (r), etc. One of the key features of this system is the ability to measure heat capacity under quasi-isothermal conditions. In the present investigation, heat capacity of a well-established system namely sapphire and thoria was measured by TMDSC under dynamic mode and also under quasi-isothermal mode. The experimental parameters, mentioned above p, a, g, and r are varied to establish the conditions for measuring heat capacity accurately.     

Preparation of 3,3-disubstituted oxindoles by addition of malonates to 3-halo-3-oxindoles

A method for the synthesis of 3,3-disubstituted oxindole derivatives is described. This involves the base-mediated addition of malonate esters to 3-halo-3-alkyloxindoles. The addition is tolerant of a range of alkyl substituents at position 3 of the oxindole. Addition to an aryl chloro-oxindole is also described.