SYNTHESIS OF SOME SULFUR-CONTAINING SPIROINDOLE DERIVATIVES

Abstract

The synthesis of some new sulfur-containing spiroindole derivatives is reported. Fluorinated 3′-aryl-2′-phenylimino-spiro[3H-indole-3,6′[4,5′-pyrazolin][4,3-d]thiazolo]2(1H)-ones were prepared by the reaction of 5-(2-oxo-3-indolinylidene)-3-aryl-2-phenylimino-4-thiazolidinones with hydrazine hydrate. The compounds have been characterized on the basis of elemental and spectral studies.     

Polyethylene glycol (PEG-400): An efficient one-pot green synthesis and anti-viral activity of novel α-diaminophosphonates

Abstract

An efficient and eco-friendly protocol has been accomplished for a series of novel α-diaminophosphonates by a one-pot, three-component system via Kabachnik-Fields reaction of 4,4′-methylenedianiline, a variety of aryl/heteroaryl aldehydes and diphenylphosphite employing polyethylene glycol (PEG-400) as a green solvent at 80?°C. All products were obtained in good to excellent yields (80–95%). The identity of the new synthesized compounds was confirmed by IR, ¹H, 13C, and 31P NMR, LC-MS and elemental analysis. In vivo anti-viral activity was evaluated against tobacco mosaic virus (TMV). Compounds 4b, 4c, 4j and 4k exhibited the highest anti-viral activities against tobacco mosaic virus (TMV) when compared with the standard drug ningnanmycin.     

Electrical,Mechanical, and Thermal Properties of Poly(4,4′-Cyclohexylidene Diphenylene-m-Benzene/Toluene-2,4-Disulfonate)

Abstract

The films of poly(4,4′-cyclohexylidene diphenylene-m-benzene disulfonate) (PSBB, 0.610 mm thick) and poly(4,4′-cyclohexylidene diphenylene-toluene-2,4-disulfonate) (PSBT, 0.537 mm thick) showed 8.23 ± 0.25 and 9.6 ± 0.245 kV, respectively, as the dielectric breakdown voltage (ac) in air at room temperature. The same films have 8.8 × 10¹¹ and 7.2 × 10¹⁴ ω°Cm volume resistivity. PSBB (40 μm thick) and PSBT (50 μm thick) films have tensile strengths of 1971 and 1677 kg/cm² and percent elongations of 1.3 and 1.2, respectively. The static hardnesses of PSBB (0.178 mm thick) and PSBT (0.190 mm thick) at three different loads (15–60 g) are 12.8–15.5 and 14.5–16.5 kg/mm², respectively. PSBB and PSBT are thermally stable up to about 355°C in an N₂ atmosphere and involve two-step degradation. DSC and DTA showed T _g at about 125–127 and 138–142°C, respectively, for PSBB and PSBT in N₂. PSBB and PSBT have comparable breakdown voltages and volume resistivity with some useful plastics whereas they have superior T _g and thermal stability with retention of excellent solubility in common solvents over polysulfonates without a cardo group. Thus, the cardo (cyclo-hexyl) group has enhanced thermal and mechanical properties with excellent solubility and easy processing.     

Synthesis of 2,3-dihydroquinazolin-4(1H)-ones from anthranilamide and ketones over Hβ zeolite in aqueous media*

The synthesis of 2,3-dihydroquinazolin-4(1H)-ones by cyclocondensation of anthranilamide with ketones in aqueous media using Hβ zeolite is reported. The scope of the reaction was explored by various ketones such as aromatic, aliphatic and cyclic ketones. Based on the preliminary mechanistic results, a tentative mechanism for the formation of 2,3-dihydroquinazolin-4(1H)-ones using zeolite catalyst (Hβ) is predicted. The reusability study, large-scale experiment and water as solvent showed significant benefits of this catalytic protocol in comparing to earlier methods.     

Synthesis of New 2,4‐Diaryl‐6‐methyl‐5‐nitropyrimidines as Antibacterial and Antioxidant Agents

A new series of 2,4‐diaryl‐6‐methyl‐5‐nitropyrimidines ( 5a , 5b , 5c , 5d , 5e , 5f , 5g , 5h , 5i ) were synthesized in good yields by Suzuki–Miyaura coupling of 2,4‐dichloro‐6‐methyl‐5‐nitropyrimidine ( 3 ) with various aryl boronic esters ( 4a , 4b , 4c , 4d , 4e , 4f , 4g , 4h , 4i ) in the presence of 1,1′‐ bis(diphenylphosphino)ferrocene dichloropalladium(II) (Pd(dppf)₂Cl₂). Further, antibacterial and antioxidant properties were screened for the title compounds 5a , 5b , 5c , 5d , 5e , 5f , 5g , 5h , 5i . Most of the compounds possessed significant activity against Gram‐positive bacteria Staphylococcus aureus and Bacillus subtilis and Gram‐negative bacteria Escherichia coli and Klebsiella pneumoniae. The antioxidant activity of the title compounds showed significant antioxidant activity when compared with vitamin C.     

Mild and Convenient Synthesis of Organic Carbamates from Amines and Carbon Dioxide using Tetraethylammonium Superoxide

A safe and simple method of preparing organic carbamates has been achieved from amines and carbon dioxide using tetraethylammonium superoxide generated in situ.     

Acyclovir-Loaded Chitosan Microspheres for Gastroretention: Development and Evaluation

Mucoadhesive chitosan microspheres of acyclovir were prepared to prolong the gastric residence time using simple emulsification phase separation technique. The particle morphology of drug-loaded formulations was measured by SEM and the particle size distribution was determined using an optical microscope. The release profile of acyclovir from microspheres was examined in simulated gastric fluid (SGF pH 1.2). The particles were found to be discreet and spherical with the maximum particles of an average size (31.62 ± 4.64). The entrapment efficiency was found to be in the range of 40.24 to 67.29%. The concentration of the glutaraldehyde (25%v/v) as a cross-linker 2 ml and drug polymer ratio of 1:2 caused an increase in the entrapment efficiency and the extent of drug release. The optimized chitosan microspheres were found to possess good bioadhesion (79.89 ± 1.01%). The gamma-scintigraphy study showed the gastric residence time of more than 6 hours which revealed that optimized formulation could be a good choice for gastroretentive systems.     

Photoinduced phase transitions

Employing actinic light to alter/stabilise a particular thermodynamic phase via the photo-isomerisation of the constituent molecules is an interesting tool to investigate soft matter from a new dimension. This article focuses on our recent results on several aspects of these non-equilibrium phase transitions, which are isothermal in nature. We specifically discuss (i) the influence of different parameters, such as confinement, applied electric field, pressure etc., on the dynamics associated with both the photochemical transition driving the equilibrium nematic to the non-equilibrium isotropic phase and the thermal back relaxation recovering the nematic phase, (ii) unique light-driven disorder–order transition in a reentrant system, (iii) dynamic self-assembly of the smectic A phase, which is stabilised only in the presence of actinic light, (iv) novel temperature-intensity phase diagrams and an example of primary and secondary photo-ferroelectric effects in an antiferroelectric smectic C system. These results highlight the fact that the actinic light can be used as a new tool to study phase transitions and the associated critical phenomena that could also bring about effects that are not seen in equilibrium situations.     

Effect of ionic liquid on polyaniline chemically synthesised under falling-pH conditions

This study investigates the effect of the ionic liquid 1-butyl-3-methyl imidazolium chloride ([bmim]Cl) on the morphological, structural, and electronic properties of polyaniline (PANI) products synthesised by the falling-pH method. Products were characterised by SEM, FT-IR, UVVIS, N₂-physisorption, and conductivity measurements. The [bmim]Cl addition strongly influenced the PANI morphology, specific surface area, porosity, and conductivity. Depending on the [bmim]Cl: ANI ratio and the synthesis pH, a wide range of PANI nanostructures could be prepared, with rod-like, and fibre-like elongated structures being the dominant morphology under most experimental conditions. Samples prepared in the presence of [bmim]Cl exhibit specific areas of ca 22–35 m² g^?1. The conductivity of the final products depends on the [bmim]Cl: ANI ratio. Temperature dependence of conductivity in the temperature range from 77 K to 300 K was also studied.     

Expanded Organic Building Units for the Construction of Highly Porous Metal–Organic Frameworks

Two new organic building units that contain dicarboxylate sites for their self‐assembly with paddlewheel [Cu₂(CO₂)₄] units have been successfully developed to construct two isoreticular porous metal–organic frameworks (MOFs), ZJU‐35 and ZJU‐36, which have the same tbo topologies (Reticular Chemistry Structure Resource (RCSR) symbol) as HKUST‐1. Because the organic linkers in ZJU‐35 and ZJU‐36 are systematically enlarged, the pores in these two new porous MOFs vary from 10.8 Å in HKUST‐1 to 14.4 Å in ZJU‐35 and 16.5 Å in ZJU‐36, thus leading to their higher porosities with Brunauer–Emmett–Teller (BET) surface areas of 2899 and 4014 m² g^?1 for ZJU‐35 and ZJU‐36, respectively. High‐pressure gas‐sorption isotherms indicate that both ZJU‐35 and ZJU‐36 can take up large amounts of CH₄ and CO₂, and are among the few porous MOFs with the highest volumetric storage of CH₄ under 60 bar and CO₂ under 30 bar at room temperature. Their potential for high‐pressure swing adsorption (PSA) hydrogen purification was also preliminarily examined and compared with several reported MOFs, thus indicating the potential of ZJU‐35 and ZJU‐36 for this important application. Studies show that most of the highly porous MOFs that can volumetrically take up the greatest amount of CH₄ under 60 bar and CO₂ under 30 bar at room temperature are those self‐assembled from organic tetra‐ and hexacarboxylates that contain m‐benzenedicarboxylate units with the [Cu₂(CO₂)₄] units, because this series of MOFs can have balanced porosities, suitable pores, and framework densities to optimize their volumetric gas storage. The realization of the two new organic building units for their construction of highly porous MOFs through their self‐assembly with [Cu₂(CO₂)₄] units has provided great promise for the exploration of a large number of new tetra‐ and hexacarboxylate organic linkers based on these new organic building units in which different aromatic backbones can be readily incorporated into the frameworks to tune their porosities, pore structures, and framework densities, thus targeting some even better performing MOFs for very high gas storage and efficient gas separation under high pressure and at room temperature in the near future.