PHOTOCHEMICAL INACTIVATION OF SINGLE-STRANDED VIRAL DNA IN THE PRESENCE OF UROCANIC ACID*

Abstract— Urocanic acid (UA) has previously been shown to react photochemically in vitro with N,N-dimethylthymine. In this study, mixtures of UA and phage G4 single-stranded DNA have been irradiated with UV light (λ≥ 254 nm) and the DNA assayed for infectivity. At the concentrations of UA employed (typically 5.4 × 10^-3 M ) there is extensive absorption of the incident light by the UA. The DNA is inactivated at rates greater than that predicted from the calculated shielding by UA, indicating that photosensitization is occurring. Photosensitization is also indicated by the fact that at high UA concentrations the inactivation rate does not decrease to zero but approaches a residual value. Furthermore, the ability to photoreactivate DNA that has been photolyzed in the presence of UA is much reduced relative to that observed upon photolysis of the DNA alone. UA is therefore responsible for the production of UV-induced DNA lesions, which are resistant to photoreactivation.
A general analysis of the effects of photosensitization on the kinetics of UV inactivation is presented in an appendix.     

Force constants,coriolis coupling constants and mean amplitudes of vibration of GaF63− and FeF63−

The force constants, Coriolis coupling constants and mean amplitudes of vibration at 0, 298.16 and 500 K for GaF₆^3?FeF₆^3? have been reported for the first time employing recent vibrational data. The results are discussed in the light of available information.     

Detection of surface atoms by energy analysis of scattered primaries and recoiled secondaries from CsBr under Ar+ and Ar+ bombardment

Time-of-flight (TOF) and electrostatic sector analysis (ESA) have been used to measure particles scattered and sputtered by direct recoils and surface recoils during 3 keV Ar⁺ and 6 keV Ar²⁺ bombardment of CsBr at forward and backscattering angles. Charge fractions of scattered argon and recoiling surface atoms are obtained. Hydrogen and oxygen surface impurities are detected predominantly as directly recoiled neutrals.     

4-(Arylaminothiocarbonyl)-1-(1-o-methoxyphenylcarbamido)-ethylpiperazines as anticonvulsants

Several 4-(arylaminothiocarbonyl)-1-(1-o-methoxyphenylcarbamido)-ethylpiperazines were synthesized and evaluated for their anticonvulsant activity against pentylenetetrazol-induced seizures in mice. The ability of substituted piperazines to inhibit in vitro respiratory activity of rat brain homogenates was also determined to study their structure-activity relationship.     

Structure of aromatic polyimides

With a view to understanding the structure of aromatic polyimide backbone, model compound N,N-bis(4-phenoxyphenyl)-1,2:4,5-benzenetetracarboxdiimide was synthesized by the condensation of pyromellitic dianhydride and 4-aminodiphenyl ether in solvent N,N-dimethylacetamide or N,N-dimethylformamide. Various side products formed during the reaction were isolated and identified by spectroscopical methods. This study reveals that the polymer backbone contains nearly 85% imide rings. The uncyclizable residues in the backbone are those derived by the chemical interaction of polymerization solvent or by the modification of intermediate orthoamido acid. The uncyclizable nature of the latter was explained in mass and infrared (IR) spectral studies. The role of the dipolar solvent appears to be vital to imidization.     

Synthesis, X-ray structure and properties of a new nitrite-bound copper(II) complex with 2-(3,5- dimethylpyrazol-1-ylmethyl)pyridine in a CuN4(O) coordination

Synthesis and characterization of a nitrite-bound copper(II) compound [CuL⁴)₂(ONO)]ClO₄ have been achieved (L⁴ = 2-(3,5-dimethylpyrazol-1-ylmethyl)pyridine]. The bidentate ligand L⁴ provides a pyridine and a pyrazole donor site; however, they are separated by a methylene spacer. The complex has been structurally characterized and it belongs to only a handful of complexes having nitrito-bound mononuclear copper(II) centre. The metal atom has a distorted square pyramidal geometry with the copper atom displaced from the equatorial plane by 0.25 Å. In MeCN solution the green complex exhibits a broad ligand-field transition at 655 nm with a shoulder at 675 nm and in dichloromethane-toluene glass (80 K) it exhibits an EPR spectral feature characteristic of the unpaired electron in the d_x²−y² orbital. Variable-temperature (80–300 K) magnetic susceptibility measurements in the solid state as well as room temperature measurement in MeCN solution reveal mononuclear magnetically dilute copper(II) centre. When examined by cyclic voltammetry (MeCN solution) it displays electrochemically irreversible Cu^II---Cu^I response [cathodic peak potential, E_pc (V vs saturated calomel electrode (SCE)): −0.32]. An oxidative response is observed at 1.14 V, probably due to bound-nitrite oxidation and is partially removed to generate a solvated complex at the electrode surface. The latter species gives rise to reversible Cu^II---Cu^I redox response [ ].     

Stability of AQUO-organic silver iodide sol

Summary The coagulation concentration for silver iodide sol, both in presence of pyridine and dioxane, increases for mono- and bivalent coagulating electrolyte. In presence of a mixture of pyridine and dioxane in equal volume, the coagulation concentration assumes an intermediate value, which is nearer to dioxane. However, in presence of dioxane more bivalent electrolyte is needed than in presence of pyridine. If a bivalent coagulating electrolyte is added to a sol containing a mixture of pyridine and dioxane, the amount of electrolyte required to coagulate is less than pyridine and greater than dioxane. Thus silver iodide sol is more stable toward mono- and bivalent coagulating electrolytes. The degree of stabilization increases with the decrease of the dielectric constant of the dispersing medium. The intermediate values for dioxane pyridine mixture is accountable by the fact that dioxane acts as a solvent for pyridine. The PH value of the sol increases up to the coagulation point. Beyond this, there is an abrupt decrease. When the particles settle down completely a rise in PH is again noted on the further addition of electrolytes. The increase in the electrical conductance is more significant after coagulation. These changes have been explained by adsorption of the ions and due to the release of ions from the electrical double layer.

---

Zusammenfassung Die Koagulationskonzentration für Silberjodidsol in Gegenwart von Pyridin und Dioxan steigt für ein- und zweiwertige Elektrolyte an. In Gegenwart einer Mischung zu gleichen Volumen erh?lt man mittlere Werte, n?her denen zu Dioxan. Für Koagulation in Gegenwart von Dioxan ist jedoch mehr zweiwertiger Elektrolyt notwendig als in Gegenwart von Pyridin. Bei Koagulation mit zweiwertigem Elektrolyt verbraucht ein Sol mit der Mischung von Pyridin und Dioxan weniger als für Pyridin und mehr als für Dioxan. Daher ist das Silbersol gegenüber ein- und zweiwertigen Elektrolyten stabiler. Der Grad der Stabilisierung w?chst mit abnehmender Dielektrizit?tskonstante des Dispersionsmediums. Die Zwischenwerte der Dioxan-Pyridin-Mischungen lassen sich verstehen durch die Tatsache, da? Dioxan als L?sungsmittel für Pyridin wirkt. Der PH-Wert des Sols w?chst bis zum Koagulationspunkt, darüberhinaus erfolgt ein steiler Abfall. Wenn die Teilchen vollst?ndig absetzen, ist bei weiterer Zugabe von Elektrolyt ein erneuter Anstieg im PH feststellbar. Der Anstieg der elektrolytischen Leitf?higkeit wird nach der Koagulation ausgepr?gter. Diese ?nderungen lassen sich durch Ionenadsorption und Freiwerden von Ionen aus der elektrischen Doppelschicht erkl?ren.

---

---

Our thanks are due to Prof. R. C. Mehrotra for providing all the facilities for this work and to Prof. S. Ghosh of Allahabad University for helpful discussions. Thanks are also due to the University Grants Commission, Government of India, for the award of a research scholarship to one of us (V. K. S.).     

Spectrophotometric determination of traces of selenium(IV) in various environmental samples using the flow-injection technique (FIT)

A simple, sensitive, and rapid flow-injection spectrophotometric method was developed for the determination of trace amounts of selenium(IV). The method is based on the oxidation reaction of 3-methyl-2-benzothiazolinone hydrazone hydrochloride (MBTH) by selenium(IV) followed by the coupling reaction with chromotropic acid (4.5-dihydroxy naphthalene-2.7-disulphonic acid) in a basic medium (phosphate buffer, pH 10.5) to give a pink derivative with λ_max 530 nm that is stable for more than 7 days at 35°C. The reaction and flow conditions of the full experimental design were optimized. A detection limit (2s) of 0.25 μg/L Se(IV) was obtained at a sampling rate of 10 samples per hour. Beer’s law is obeyed for a Se(IV) concentration range of 0.05–0.5 μg/mL at the wavelength of maximum absorption. The detailed study of various interference ions indicates that the method is highly selective. The method was successfully applied to the determination of traces of selenium(IV) in various water samples. The results obtained were in good agreement with those obtained by the reported methods at the 95% confidence level. The text was submitted by the authors in English.     

Kinetics of substitution of aquo ligands fromcis-diaquo-bis-(biguanide) cobalt(III) and chromium(III) ions by aspartic acid in ethanol—water mixtures

The kinetics of substitution of aqua ligands fromcis-diaqua-bis(biguanide)cobalt(III) and chromium(III) ions by aspartic acid in EtOH–H₂O media have been studied spectrophotometrically in the 30 to 45°C range. We propose the following rate law for the anation