Expanded Organic Building Units for the Construction of Highly Porous Metal–Organic Frameworks

Two new organic building units that contain dicarboxylate sites for their self‐assembly with paddlewheel [Cu₂(CO₂)₄] units have been successfully developed to construct two isoreticular porous metal–organic frameworks (MOFs), ZJU‐35 and ZJU‐36, which have the same tbo topologies (Reticular Chemistry Structure Resource (RCSR) symbol) as HKUST‐1. Because the organic linkers in ZJU‐35 and ZJU‐36 are systematically enlarged, the pores in these two new porous MOFs vary from 10.8 Å in HKUST‐1 to 14.4 Å in ZJU‐35 and 16.5 Å in ZJU‐36, thus leading to their higher porosities with Brunauer–Emmett–Teller (BET) surface areas of 2899 and 4014 m² g^?1 for ZJU‐35 and ZJU‐36, respectively. High‐pressure gas‐sorption isotherms indicate that both ZJU‐35 and ZJU‐36 can take up large amounts of CH₄ and CO₂, and are among the few porous MOFs with the highest volumetric storage of CH₄ under 60 bar and CO₂ under 30 bar at room temperature. Their potential for high‐pressure swing adsorption (PSA) hydrogen purification was also preliminarily examined and compared with several reported MOFs, thus indicating the potential of ZJU‐35 and ZJU‐36 for this important application. Studies show that most of the highly porous MOFs that can volumetrically take up the greatest amount of CH₄ under 60 bar and CO₂ under 30 bar at room temperature are those self‐assembled from organic tetra‐ and hexacarboxylates that contain m‐benzenedicarboxylate units with the [Cu₂(CO₂)₄] units, because this series of MOFs can have balanced porosities, suitable pores, and framework densities to optimize their volumetric gas storage. The realization of the two new organic building units for their construction of highly porous MOFs through their self‐assembly with [Cu₂(CO₂)₄] units has provided great promise for the exploration of a large number of new tetra‐ and hexacarboxylate organic linkers based on these new organic building units in which different aromatic backbones can be readily incorporated into the frameworks to tune their porosities, pore structures, and framework densities, thus targeting some even better performing MOFs for very high gas storage and efficient gas separation under high pressure and at room temperature in the near future.     

A catalyst-free protocol for direct oxidative esterification of alcohols and aldehydes

A fast, simple, and efficient protocol for the direct conversion of alcohols and aldehydes to methyl ester has been developed using TsNBr₂ without any catalyst. The one pot reaction proceeds in the presence of a base at room temperature in methanol, to produce the corresponding methyl ester in high yield within a short time.     

Simple,Copper(I)-Catalyzed Oxidation of Benzylic/Allylic Alcohols to Carbonyl Compounds: Synthesis of Functionalized Cinnamates in One Pot

An environmentally benign [Cu(I)]-catalyzed oxidation of activated (benzylic/allylic) alcohols to the corresponding carbonyl compounds is presented. Interestingly, the reaction was also compatible with benzylic alcohols containing ortho-bromo substituents on the aromatic ring without competing with the expected intermolecular Buchwald coupling. Significantly, the catalytic system enables the synthesis of cinnamate-esters in a sequential domino one-pot fashion via oxidation followed by Wittig–Horner protocol.     

Total synthesis of (6Z,9S)-3,4-trans-9-hydroxy-3-methyldodec-cis-6-en-4-olide and (6Z)-3,4-trans-9-oxo-3-methyldodec-cis-6-en-4-olide γ-butyrolactones

The first total synthesis of (6Z,9S)-3,4-trans-9-hydroxy-3-methyldodec-cis-6-en-4-olide and (6Z)-3,4-trans-9-oxo-3-methyldodec-cis-6-en-4-olide was achieved in a convergent pathway. The salient features of our synthesis include Ohira–Bestmann reaction, regioselective alkyne addition to terminal epoxide, TEMPO/BAIB mediated oxidative lactonization, and partial hydrogenation.     

An efficient synthesis of 3-(N-piperidinemethyl)-2,2,5,5-tetramethyl-1-oxy-3-pyrroline,a promising radioprotector for cancer radiotherapy

Nitroxides can ameliorate the toxic effects of radiation during cancer therapy. Nitroxides are paramagnetic and can be used in magnetic resonance imaging (MRI) and electron paramagnetic resonance imaging (EPRI) to monitor in vivo oxidative stress status. Compound 5 (3-(N-piperidinemethyl)-2,2,5,5-tetramethyl-1-oxy-3-pyrroline) was found to be the most effective nitroxide radioprotector. An efficient synthesis for this promising radioprotector was developed.     

Total synthesis of two γ-butyrolactone containing compounds (Z,11S)-3,4-trans-11-hydroxy-3-methyldodec-cis-6-en-4-olide and (Z)-3,4-trans-11-oxo-3-methyldodec-cis-6-en-4-olide

The first total synthesis of (Z,11S)-3,4-trans-11-hydroxy-3-methyldodec-cis-6-en-4-olide and (Z)-3,4-trans-11-oxo-3-methyldodec-cis-6-en-4-olide was accomplished using Jacobsen hydrolytic kinetic resolution, Ohira–Bestmann reaction, regioselective alkyne addition to terminal carbon atom of epoxide, intramolecular TEMPO/BAIB mediated oxidative lactonization and partial hydrogenation as the key steps.     

Ion beam irradiation of ZnS dispersed in PMMA and its photocatalytic application

ZnS nanoparticles implanted with 45 keV O⁵⁺ ion beam exhibited 83.6 % degradation of methyl blue in 2 h. This idea was utilized to fabricate nanocomposite system of ZnS and PMMA where ZnS nanoparticles were immobilized in PMMA film and irradiated with 45 keV O⁵⁺ ion beam at particle fluence of 2.5 × 10¹⁵, 1 × 10¹⁶ and 4 × 10¹⁶ particles/cm². These irradiated batches of ZnS nanoparticle immobilized in PMMA batches revealed formation of porous structure characterized by scanning electron microscopy and these batches exhibited 54 % photocatalytic degradation of methyl blue in 80 min which was higher as compared to the pristine ZnS nanoparticles.     

Thermal performance of stable SiO2 nanofluids and regression correlations to estimate their thermophysical properties

The present work investigates the best mix ratio of Glycerol in Water as a medium to prepare a stable nanofluid. Increasing the proportion of glycerol enhances the aqueous mix's dynamic viscosity and improves the prepared nanofluid's stability. The thermal conductivity and viscosity of the Glycerol and Water mixtures determination were undertaken at various Glycerol ratios. The best percentage of glycerol in the mixture is found to have the least amount of thermal conductivity loss and the optimum viscosity gain. Silica (SiO₂) nanofluid of 0.25%, 0.5%, 1%, and 1.5% weight concentrations was prepared with this optimal mixture of Glycerol and Water. The stability of these SiO₂ nanofluids is evaluated by determining the zeta potential at different time intervals. The nanofluids prepared were observed to be stable for one month. The thermal conductivity and viscosity of the nanofluids are measured between the temperature limits of 30°–70°C. A peak increment of 32.1%and 46.3% in thermal conductivity and viscosity is observed. Furthermore, when the percentage enhancement ratio (PER) and Mouromtseff ratio of these nanofluids is examined, it is observed that they have more excellent thermal performance at higher temperatures. Regression correlations are developed to estimate the thermal conductivity and viscosity of the prepared nanofluids with a maximum deviation of 9%.     

A simple and cost-effective synthesis of sulfated β-cyclodextrin and its application as chiral mobile phase additive in the separation of cloperastine enantiomers

Journal of Inclusion Phenomena and Macrocyclic Chemistry - A simple and cost-effective method for the synthesis of sulfated β-cyclodextrin, one of the most widely used chiral mobile phase...     

Effect of Cold Atmospheric Plasma Jet and Gamma Radiation Treatments on Gingivobuccal Squamous Cell Carcinoma and Breast Adenocarcinoma Cells

Surgery, chemotherapy and radiotherapy, the conventional treatment modalities of cancer though successful are limited by presence of residual tumor cells, toxic side-effects and treatment resistance, thus raising the need for investigating other novel approaches. Here, we have used a cold atmospheric plasma (CAP) jet and assessed the in vitro efficacy in gingivobuccal squamous cell carcinoma (GB-SCC) – ITOC-03, breast adenocarcinoma—MCF7 and HEK293 cells. Cells lines were subjected to varying doses of ionizing radiation (0, 2, 4, 6, 8 Gy) and CAP jet treatment (0, 60, 180, 240, 300 s). CAP jet treatment showed time dependent increase in H₂O₂ and NO₂^? concentration. Cell viability assay showed potent effect of CAP jet on all three cell lines in comparison to radiation treatment, while helium gas treatment showed minimal inhibitory effect. Irradiated, CAP jet and helium gas treated cells showed loss of nucleic acid features, 788 cm^?1 and 1340 cm^?1 in Raman spectra, indicating DNA damage. Principal Component Analysis (PCA) showed distinct classification of CAP-treated and control cells, while Principal Component – Linear Discriminant Analysis (PC-LDA) based classification of Raman spectra showed ITOC-03 and HEK293 cells to be sensitive to CAP jet and radiation treatment in comparison to MCF7 cells. Collectively, cell viability assay and Raman spectroscopy have shown potent effect of CAP jet in GB-SCC and breast adenocarcinoma cells.