Surface extenders and an optimal pore size promote high dynamic binding capacities of antibodies on cation exchange resins

Increased recombinant protein expression yields and a large installed base of manufacturing facilities designed for smaller bulk sizes has led to the need for high capacity chromatographic resins. This work explores the impact of three pore sizes (with dextran distribution coefficients of 0.4, 0.53, and 0.64), dextran surface extender concentration (11–20 mg/mL), and ligand density (77–138 μmol H+/mL resin) of cation exchange resins on the dynamic binding capacity of a therapeutic antibody. An intermediate optimal pore size was identified from three pore sizes examined. Increasing ligand density was shown to increase the critical ionic strength, while increasing dextran content increased dynamic binding capacity mainly at the optimal pore size and lower conductivities. Dynamic binding capacity as high as 200 mg/mL was obtained at the optimum pore size and dextran content.     

The Co‐Entrapment of a Homogeneous Catalyst and an Ionic Liquid by a Sol–gel Method: Recyclable Ionogel Hydrogenation Catalysts

Molecular hydrogenation catalysts have been co‐entrapped with the ionic liquid [Bmim]NTf₂ inside a silica matrix by a sol–gel method. These catalytic ionogels have been compared to simple catalyst‐doped glasses, the parent homogeneous catalysts, commercial heterogeneous catalysts, and Rh‐doped mesoporous silica. The most active ionogel has been characterised by transmission electron microscopy, X‐ray photoelectron spectroscopy, and solid state NMR before and after catalysis. The ionogel catalysts were found to be remarkably active, recyclable and resistant to chemical change.     

Fluorescence detection and quantitation of recombinant proteins containing oligohistidine tag sequences directly in sodium dodecyl sulfate-polyacrylamide gels

Two fluorophore-nitrilotriacetic acid conjugates, Pro-Q Sapphire 365 and Pro-Q Sapphire 488 oligohistidine gel stains, have been developed for the fluorescence detection of fusion proteins containing oligohistidine tags directly in sodium dodecyl sulfate polyacrylamide gels, without the requirement for electroblotting, reporter enzymes or secondary detection reagents. Pro-Q Sapphire 365 oligohistidine gel stain exhibits bright-blue fluorescence (emission maximum = 450 nm) when illuminated with UV-A or UV-B light from a standard ultraviolet transilluminator. Pro-Q Sapphire 488 oligohistidine gel stain exhibits bright-green fluorescence (emission maximum = 515 nm) when illuminated with visible light from a laser-based gel scanner equipped with a 470 nm second-harmonic generation (SHG) or 488 nm argon-ion laser source. Typically, 25-65 ng of oligohistidine-tagged fusion protein in whole cell lysates is detectable using either stain. After documenting the fluorescence signal from the Pro-Q Sapphire dyes, gels may be post-stained with the red-fluorescent SYPRO Ruby protein gel stain in order to reveal the total protein pattern.     

Open-path FT-IR spectrometry: is completely unattended operation feasible?

Most protocols used for open-path Fourier transform infrared spectrometry (OP/FT-IR) require that spectra be measured at a resolution of 1 cm(-1) and that the concentrations of the analytes be calculated by classical least squares regression (CLS). These specifications were largely developed for monitoring light molecules with easily resolvable rotational fine structure. For most volatile organic compounds in air, the rotational fine structure is not resolvable and better accuracy can be obtained when the spectrum is measured at lower resolution (typically 8 cm(-1)), provided that the algorithm used for quantification is partial least squares regression (PLS). By measuring the spectrum at low resolution, the need for a liquid-nitrogen-cooled mercury cadmium telluride detector is reduced and a pyroelectric detector operating at ambient temperature can be used instead. By using PLS rather than CLS, spectral features due to water vapor do not have to be compensated and a short-path background spectrum can be used, greatly simplifying field measurements.     

Evaluation of automated nano-electrospray mass spectrometry in the determination of non-covalent protein-ligand complexes

The use of electrospray ionization mass spectrometry (ESI-MS) for studying non-covalent interactions between macromolecules and ligands is well established. ESI-MS can be a useful tool for the determination of dissociation constants between molecules in the gas phase. We validate this method by studying the binding of the catalytic domain of cellobiohydrolase I (CBH I) from Trichoderma reesei to the disaccharide inhibitor cellobiose. The method was further applied to study two newly synthesized cellobiose derivatives (m-iodobenzyl 2-deoxy-2-azido-beta-cellobioside and p-benzyloxybenzyl beta-cellobioside). In a titration experiment, peak areas of different charge states of the free enzyme and the complex were summed in order to determine the dissociation constant. For cellobiose and m-iodobenzyl 2-deoxy-2-azido-beta-cellobioside, the calculated values are in good agreement with those reported from either displacement titration or equilibrium binding experiments in solution. Due to non-specific binding, the dissociation constant of p-benzyloxybenzyl beta-cellobioside does not correspond with the solution-based value. Our results indicate the need for careful interpretation of data sets when using nanoESI to study non-covalent interactions.     

Development of an anodic stripping voltammetric assay, using a disposable mercury-free screen-printed carbon electrode, for the determination of zinc in human sweat

This paper reports on the development of a novel electrochemical assay for Zn²⁺ in human sweat, which involves the use of disposable screen-printed carbon electrodes (SPCEs). Initially, SPCEs were used in conjunction with cyclic voltammetry to study the redox characteristics of Zn²⁺ in a selection of supporting electrolytes. The best defined cathodic and anodic peaks were obtained with 0.1 M NaCl/0.1 M acetate buffer pH 6.0. The anodic peak was sharp and symmetrical which is typical for the oxidation of a thin metal film on the electrode surface. This behaviour was exploited in the development of a differential pulse anodic stripping voltammetric (DPASV) assay for zinc. It was shown that a deposition potential of −1.6 V versus Ag/AgCl and deposition time of 60 s with stirring (10 s equilibration) produced a well-defined stripping peak with E_pa = −1.2 V versus Ag/AgCl. Using these conditions, the calibration plot was linear over the range 1 × 10⁻⁸ to 5 × 10⁻⁶ M Zn²⁺. The precision was examined by carrying out six replicate measurements at a concentration of 2 × 10⁻⁶ M; the coefficient of variation was calculated to be 5.6%. The method was applied to the determination of the analyte in sweat from 10 human volunteers. The concentrations were between 0.39 and 1.56 μg/mL, which agrees well with previously reported values. This simple, low-cost sensitive assay should have application in biomedical studies and for stress and fatigue in sports studies.     

Benzothiadiazole- and pyrrole-based polymers bearing thermally cleavable solubilizing groups as precursors for low bandgap polymers

We report the design, synthesis and characterization of new benzothiadiazole- and pyrrole-based copolymers whose solubility and bandgap drastically change after thermal treatment of their thin films.